You might want to make your main connection to the mids/tweet posts, and jumper "down" to the woofers. Just a little tweak that can sometimes make a difference if your jumpers aren't as good as your main cables...
We do have the fifth largest economy in the world.
"If the state –with its 39.5 million people – was an independent country, it would have the fifth largest economy in the world, according to new federal figured released on Friday – just surpassing the United Kingdom, which has a population of 65.6 million."
Of course, none of this has anything to do with what anyone did with their stereo last night.
Lumin X1 file player
Sony XA-5400ES SACD
Pass XP-22 pre, X600.5 amps
Magico S5 MKII Mcast Rose speakers, SPOD spikes
Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
Shunyata Sigma XLR analog ICs, Sigma speaker cables
Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables
Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
Three 20 amp circuits.
You might want to make your main connection to the mids/tweet posts, and jumper "down" to the woofers. Just a little tweak that can sometimes make a difference if your jumpers aren't as good as your main cables...
I do not know if you looked at Axpona Joe, many rooms were diagonal. Red on lower post, black on upper or vice versa. Now it can be like splitting hair but some feel it works. I hook mine just like yours. I've tried it both ways no difference but lower takes some of the strain off the posts
Since both his cables are Acoustic Zen might be a close call Steve.
Ivan/Steve I feel like the Elacs have more tonality with this type of connection. They are just ever so slightly rolled off at the top vs setting as Steve suggested. For the distance I sit from the towers, this works best for me. And yes they are (or at least should be) exactly the same as the speaker wire. AZ Satori’s
They seem to allow a smoother transient is the main change I heard. Smoother at higher volumes.
The feet on the SVS was also a noticeable change. Much tighter and cleaner (less boomy) bass. Better integration into 2.1ch listening.
As a side note, only being able to see your parents once a year sucks.
Agreed.
The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Statement V2 cartridge and Origin Conqueror Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Pioneer Elite SC-LX701, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB800 "in-wall" surrounds.
“Every record has been destroyed or falsified, every book has been rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered…History has stopped. Nothing exists except the endless present in which the party is always right” — George Orwell
“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
Lumin X1 file player
Sony XA-5400ES SACD
Pass XP-22 pre, X600.5 amps
Magico S5 MKII Mcast Rose speakers, SPOD spikes
Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
Shunyata Sigma XLR analog ICs, Sigma speaker cables
Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables
Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
Three 20 amp circuits.
I replaced my Rotel transport with my Marantz. The silver face stuck out too much in the sea of black. I ended with cleaner looks and cleaner sound.
TV room- B&W 703, SVS PB10 NSD, Marantz NR1607, Parasound 1500a, Pro-Ject Debut Carbon (Yellow) with Acrylic platter, Pro-Ject phono pre, MIT AVT 2 speaker cables, MIT AVT 1 and AVT 2 ICs, XLO Jumpers, Signal Dig Coax, Signal Cable Magic Power Cables x3, Samsung QN75Q7DR Qled 75" tv, Harmony 1100, Sony BDP-S6200, Marantz DV-4200 (as Transport), Cambridge Audio DAC Magic100, Monster 3600MKII, Nintendo Switch and Xbox 360 Family room Samsung 55JS7000 Android Mi Box3 and Apple TV, Polk Magnifi Max. - Pool /Gazebo Yamaha RX-A1010, Polk Patio 25x4, Rotel RDV 1045 (as CDP) MIT AVT3 ICs - Work - Spotify Premium, Neutron App or Amazon Music to my FiiO Kunlun into my Grado SR125e
Installed my Cullen Gold power series cables and Audience OHNO rca interconnects. Also added a longer Monoprice Ethernet cable to connect the left/right speakers as the stock 10 footer length doesn’t cut it length wise for me. Also these are the first pictures of the KEFS on the Skylan stands. Rocking out to Fleetwood Mac right now!
2 Channel - Dual Purpose system in the works
Polk LSIM707 I Polk LSIM 706C I Modwright SWL9.0 Anniversary Pre I Marantz AV7707 I B&K Ref 200.7 I Rega P6 w/ Ania MC I Rega Fono MC I Audience Ohno ICs/Audience Forte F3 Power Chord/Acoustic Zen Satori I Cambridge 851N
@Clipdat One is the Neo PSU speed control for the P6 and the other is the Fono MC
2 Channel - Dual Purpose system in the works
Polk LSIM707 I Polk LSIM 706C I Modwright SWL9.0 Anniversary Pre I Marantz AV7707 I B&K Ref 200.7 I Rega P6 w/ Ania MC I Rega Fono MC I Audience Ohno ICs/Audience Forte F3 Power Chord/Acoustic Zen Satori I Cambridge 851N
Right off the bat they are warmer. Seemed very dark at first listen but have livened up a bit. I was a bit worried at first but its coming around now. Not much else to write about at the moment. I’m attesting all the change to the power cords as I don’t think the Ethernet interconnect between the speakers is gonna matter much. The one that came with the KEFS seems to be a run of the mill cat6 cable.
2 Channel - Dual Purpose system in the works
Polk LSIM707 I Polk LSIM 706C I Modwright SWL9.0 Anniversary Pre I Marantz AV7707 I B&K Ref 200.7 I Rega P6 w/ Ania MC I Rega Fono MC I Audience Ohno ICs/Audience Forte F3 Power Chord/Acoustic Zen Satori I Cambridge 851N
Actually bass seems noticeable tighter too. Really getting some impact out of these KEFS now
2 Channel - Dual Purpose system in the works
Polk LSIM707 I Polk LSIM 706C I Modwright SWL9.0 Anniversary Pre I Marantz AV7707 I B&K Ref 200.7 I Rega P6 w/ Ania MC I Rega Fono MC I Audience Ohno ICs/Audience Forte F3 Power Chord/Acoustic Zen Satori I Cambridge 851N
Comments
I suppose that's based on Giordanos stuffed pizza consumption!
PS Audio PerfectWave Power Plant 10
Rears Salk SuperCharged Surrounds
Source PSA PWT into NSD Supremo
Pre/Pro Integra DHC 40.1
LCD Samsung LN46B750
Mains Salk HT2-TL
Center Salk HT2C
Pre Cary SLP-05
Wires WW & MIT
Damn; you just don't stop do you
Hehe. Just looking for good deals!
Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, PASS ACA Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
Spare Room: Antique Sound Labs Wave AV-8 Monoblocks, Tisbury Mini Passive Pre, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
Garage: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
And vacuuming them up like a Hoover
One is the SVS soundpath isolation feet system to my SB16 Ultra,
The other is adding the Acoustic Zen Satori jumpers to the Elacs
I also have two more Wireworld power cables on the way to round off the new power conditioner connections.
More pics to come.
I like it! It's very clean.
The Bluesound Node 2i arrived today (haven't hooked it up yet).
Interesting warning label on the front of the box:
Am I missing something? Does streaming through the Node 2i not apply to music? Is this a beverage dispenser??
Vinyl: Fluance RT82 * Bottlehead Reduction + Integration Upgrade * KAB RF1
Video: Hisense 55H8F * Panasonic DMP-UB200 * Z-line Designs Elektra
Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, PASS ACA Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
Spare Room: Antique Sound Labs Wave AV-8 Monoblocks, Tisbury Mini Passive Pre, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
Garage: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
You might want to make your main connection to the mids/tweet posts, and jumper "down" to the woofers. Just a little tweak that can sometimes make a difference if your jumpers aren't as good as your main cables...
OH, GREAT....I already licked mine! Dang.
We do have the fifth largest economy in the world.
"If the state –with its 39.5 million people – was an independent country, it would have the fifth largest economy in the world, according to new federal figured released on Friday – just surpassing the United Kingdom, which has a population of 65.6 million."
http://fortune.com/2018/05/05/california-fifth-biggest-economy-passes-united-kingdom/
Of course, none of this has anything to do with what anyone did with their stereo last night.
Sony XA-5400ES SACD
Pass XP-22 pre, X600.5 amps
Magico S5 MKII Mcast Rose speakers, SPOD spikes
Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
Shunyata Sigma XLR analog ICs, Sigma speaker cables
Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables
Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
Three 20 amp circuits.
I do not know if you looked at Axpona Joe, many rooms were diagonal. Red on lower post, black on upper or vice versa. Now it can be like splitting hair but some feel it works. I hook mine just like yours. I've tried it both ways no difference but lower takes some of the strain off the posts
Since both his cables are Acoustic Zen might be a close call Steve.
Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, PASS ACA Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
Spare Room: Antique Sound Labs Wave AV-8 Monoblocks, Tisbury Mini Passive Pre, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
Garage: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
They seem to allow a smoother transient is the main change I heard. Smoother at higher volumes.
The feet on the SVS was also a noticeable change. Much tighter and cleaner (less boomy) bass. Better integration into 2.1ch listening.
As a side note, only being able to see your parents once a year sucks.
Agreed.
“Every record has been destroyed or falsified, every book has been rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered…History has stopped. Nothing exists except the endless present in which the party is always right” — George Orwell
“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
"Unwad those panties and have a good time man. We're all here to help each other, no matter how it might appear." DSkip
Sony XA-5400ES SACD
Pass XP-22 pre, X600.5 amps
Magico S5 MKII Mcast Rose speakers, SPOD spikes
Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
Shunyata Sigma XLR analog ICs, Sigma speaker cables
Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables
Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
Three 20 amp circuits.
"Unwad those panties and have a good time man. We're all here to help each other, no matter how it might appear." DSkip
Polk LSIM707 I Polk LSIM 706C I Modwright SWL9.0 Anniversary Pre I Marantz AV7707 I B&K Ref 200.7 I Rega P6 w/ Ania MC I Rega Fono MC I Audience Ohno ICs/Audience Forte F3 Power Chord/Acoustic Zen Satori I Cambridge 851N
Polk LSIM707 I Polk LSIM 706C I Modwright SWL9.0 Anniversary Pre I Marantz AV7707 I B&K Ref 200.7 I Rega P6 w/ Ania MC I Rega Fono MC I Audience Ohno ICs/Audience Forte F3 Power Chord/Acoustic Zen Satori I Cambridge 851N
Polk LSIM707 I Polk LSIM 706C I Modwright SWL9.0 Anniversary Pre I Marantz AV7707 I B&K Ref 200.7 I Rega P6 w/ Ania MC I Rega Fono MC I Audience Ohno ICs/Audience Forte F3 Power Chord/Acoustic Zen Satori I Cambridge 851N
Polk LSIM707 I Polk LSIM 706C I Modwright SWL9.0 Anniversary Pre I Marantz AV7707 I B&K Ref 200.7 I Rega P6 w/ Ania MC I Rega Fono MC I Audience Ohno ICs/Audience Forte F3 Power Chord/Acoustic Zen Satori I Cambridge 851N