What did you do to your stereo rig today?

14041434546196

Comments

  • treitz3
    treitz3 Posts: 19,593
    edited April 2019
    ZLTFUL wrote: »
    voltz wrote: »
    I unplugged my gear and tore it all down and got it all boxed up!

    Dialing in the subs right now and then going to be doing the same tomorrow myself.

    Ryan, I will help redial them in for the show. Acoustics will be COMPLETELY different there.

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • BlueFox
    BlueFox Posts: 15,251
    Installed a Lumin X1, but something isn’t right. The app sees all the songs, but they don’t play. It goes to the song, the title displays on the X1, then it goes to the next song, title displays, then goes to the next track. I had this issue once with my S1, but I forgot how I fixed it. Oh well, the S1 is working one more day.
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • nooshinjohn
    nooshinjohn Posts: 25,628
    Lumin and Pass Labs don't work well together. Send that junk to me and get yourself some Emotiva gear and everything will work just fine. :p
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
  • voltz
    voltz Posts: 5,384
    edited April 2019
    mhardy6647 wrote: »
    <drum roll>

    Believe it or not...

    Finally...

    We are...


    cliplead free upstairs.

    - And there was great rejoicing -

    47662491102_d0396b4672_h.jpgDSC_4468 (2) by Mark Hardy, on Flickr

    47715535421_87a57cacc6_h.jpgDSC_4465 (2) by Mark Hardy, on Flickr

    you should sell these :) I want one for my full range speakers I built o:)

    but then I'd have to buy a super tweeter!
    2 ch- Polk CRS+ * Vincent SA-31MK Preamp * Vincent Sp-331 Amp * Marantz SA8005 SACD * Project Xperience Classic TT * Sumiko Blue Point #2 MC cartridge

    HT - Polk 703's * NAD T-758 * Adcom 5503 * Oppo 103 * Samsung 60" series 8 LCD
  • BlueFox
    BlueFox Posts: 15,251
    Lumin and Pass Labs don't work well together. Send that junk to me and get yourself some Emotiva gear and everything will work just fine. :p

    Yes. Simplicity succeeds, complexity fails. :)

    Seriously though, that was my work software design philosophy.
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • verb
    verb Posts: 10,176
    Replaced the power switch on my Acurus A80. These DPST switches have been known to burn out (neon indicator light) after some time. Acurus did offer a replacement, but that ended quite a few years ago according to them. That switch is not in production anymore. Original switch:
    6zxex24szxcd.png
    Found a replacement, that is also illuminated. The challenge was to find one that required 110v for the light. Most nowadays are LED.

    Installed, works great, and, I dare say, retains the Acurus aesthetic!
    ynfgs3shf52r.jpg

    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • nooshinjohn
    nooshinjohn Posts: 25,628
    For you Verb, the question is not what did you do, but what didn’t you do to your stereo today.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
  • BlueFox
    BlueFox Posts: 15,251
    BlueFox wrote: »
    Installed a Lumin X1, but something isn’t right. The app sees all the songs, but they don’t play. It goes to the song, the title displays on the X1, then it goes to the next song, title displays, then goes to the next track. I had this issue once with my S1, but I forgot how I fixed it. Oh well, the S1 is working one more day.

    Fixed that issue. Operator issue. LOL

    sm94t1y7w8z1.jpeg




    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • BlueBirdMusic
    BlueBirdMusic Posts: 2,500
    For you Verb, the question is not what did you do, but what didn’t you do to your stereo today.

    I can see Verb working on a discussion similar to the one in Audiogon that the guy talks about every amp he has ever owned. Verb's discussion will be about every piece of equipment he currently owns. Maybe he needs his personal "What did Verb do to his stereo rigs today?". (We wouldn't kid with you if you were not liked.)


    My Long List of Amplifiers and My Personal Review of Each!
    https://forum.audiogon.com/discussions/my-long-list-of-amplifiers-and-my-personal-review-of-each
    "Sometimes you have to look to the past to understand where you are going in the future"

    Harry / Marietta GA
  • verb
    verb Posts: 10,176
    For you Verb, the question is not what did you do, but what didn’t you do to your stereo today.

    I can see Verb working on a discussion similar to the one in Audiogon that the guy talks about every amp he has ever owned. Verb's discussion will be about every piece of equipment he currently owns. Maybe he needs his personal "What did Verb do to his stereo rigs today?". (We wouldn't kid with you if you were not liked.)


    My Long List of Amplifiers and My Personal Review of Each!
    https://forum.audiogon.com/discussions/my-long-list-of-amplifiers-and-my-personal-review-of-each

    OMG dude! Nice list for sure. Not your first rodeo! Looks like a roadmap for me! :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • steveinaz
    steveinaz Posts: 19,537
    edited May 2019
    Finally cut down my speaker bases closer to the size of the speakers, and added rubber feet. This gives an additional 2 1/2" of height. Total speaker height now is 44". Much better, and puts tweeters on ear axis.

    td8oaivzslyj.jpg
    Source: Bluesound Node 2i - Preamp/DAC: Benchmark DAC2 DX - Amp: Parasound Halo A21 - Speakers: MartinLogan Motion 60XTi - Shop Rig: Yamaha A-S501 Integrated - Shop Spkrs: Elac Debut 2.0 B5.2
  • VR3
    VR3 Posts: 29,114
    Hmmm… looks decoupled there Steve... obviously missing something since they are not coupled...….






































    JK - looks great, bet it sounds awesome
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • pitdogg2
    pitdogg2 Posts: 26,228
    what kind of wood are they Steve?
  • joecoulson
    joecoulson Posts: 4,943
    And good ol Tucker on the soap box no less.
  • steveinaz
    steveinaz Posts: 19,537
    pitdogg2 wrote: »
    what kind of wood are they Steve?

    They were cutting boards....I'm trying to remember....I got nothin.'
    Source: Bluesound Node 2i - Preamp/DAC: Benchmark DAC2 DX - Amp: Parasound Halo A21 - Speakers: MartinLogan Motion 60XTi - Shop Rig: Yamaha A-S501 Integrated - Shop Spkrs: Elac Debut 2.0 B5.2
  • audioluvr
    audioluvr Posts: 5,738
    Maple
    Gustard X26 Pro DAC
    Belles 21A Pre modded with Mundorf Supreme caps
    B&K M200 Sonata monoblocks refreshed and upgraded
    Polk SDA 1C's modded / 1000Va Dreadnaught
    Wireworld Silver Eclipse IC's and speaker cables
    Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)


    There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus
  • pitdogg2
    pitdogg2 Posts: 26,228
    edited May 2019
    steveinaz wrote: »
    pitdogg2 wrote: »
    what kind of wood are they Steve?

    They were cutting boards....I'm trying to remember....I got nothin.'

    Looks like Acacia dark and light wood, I know it's not Walnut probably.
    That acacia seems to be the current wood of choice for cutting boards and such.
  • joecoulson
    joecoulson Posts: 4,943
    Installed the new Monsoon power cable on the SVS

    a7ebojy9zqoj.jpeg
    5izixxlkaqhw.jpeg
    akqicmccfcgp.jpeg
  • warren
    warren Posts: 756
    Turned it on and enjoyed the SDA SRS 2.3’s, Carver M-1.0t amp being fed by Carver C 2
    Some final words,
    "If you keep banging your head against the wall,
    you're going to have headaches."
    Warren
  • Clipdat
    Clipdat Posts: 13,047
    joecoulson wrote: »
    5izixxlkaqhw.jpeg

    What are "Transient Intermodulation Distortion", "Magnetic Confusion", and "Grain-Junction Discontinuities" other than marketing buzzwords?
  • joecoulson
    joecoulson Posts: 4,943
    I guess you are right Drew. The cable must suck.
  • mhardy6647
    mhardy6647 Posts: 34,345
    Clipdat wrote: »
    joecoulson wrote: »
    5izixxlkaqhw.jpeg

    What are "Transient Intermodulation Distortion", "Magnetic Confusion", and "Grain-Junction Discontinuities" other than marketing buzzwords?

    Tranisent IM distortion is a real thing -- it was a big deal in the 1980s; harman/kardon (Matti Otala) focused on bandwidth and phase linearity to minimize TIM as it was known.
    http://otala.com/pages/mao/
    https://www.inner-magazines.com/audiophilia/the-2-channel-audio-amplifier/

    86tvdhwyrqjv.png
    source:
    https://www.hifiengine.com/manual_library/harman-kardon/products.shtml (1983/84 brochure)

    Can't offer anything on Magnetic Confusion (sounds like a phrase/ from a Jimi Hendrix song). There are certainly discontinuities in ordinary drawn wire conductors, but whether they matter in the real world -- who knows?


  • verb
    verb Posts: 10,176
    Gotta hand it to the professor! First thing this morning I’ve already learned something! :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • VR3
    VR3 Posts: 29,114
    I have some magnetically confused power cables, the other day they switched to DC and back to AC... can be a real problem with electronics
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • steveinaz
    steveinaz Posts: 19,537
    pitdogg2 wrote: »
    what kind of wood are they Steve?

    Found it; they are Acacia wood.
    Source: Bluesound Node 2i - Preamp/DAC: Benchmark DAC2 DX - Amp: Parasound Halo A21 - Speakers: MartinLogan Motion 60XTi - Shop Rig: Yamaha A-S501 Integrated - Shop Spkrs: Elac Debut 2.0 B5.2
  • verb
    verb Posts: 10,176
    From AQ's own white paper, I found this mention of magnet confusion:
    zsd9ki1ie49n.png
    https://www.audioquest.com/content/aq/pdf/BoomBox.pdf
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • pitdogg2
    pitdogg2 Posts: 26,228
    edited May 2019
    verb wrote: »
    Gotta hand it to the professor! First thing this morning I’ve already learned something! :smile:

    I hate it when he does that. Here I am living life large and wammo he teaches me how stupid I am.
    Lol keep up the good work Doc o:)
  • pitdogg2
    pitdogg2 Posts: 26,228
    steveinaz wrote: »
    pitdogg2 wrote: »
    what kind of wood are they Steve?

    Found it; they are Acacia wood.

    Some days that one brain cell polar aggravate's properly upstairs for me.
    :D:D:D
  • steveinaz
    steveinaz Posts: 19,537
    Better pics of the speaker bases:

    zm48qfygdghw.jpg
    sn7qeluawm1w.jpg
    Source: Bluesound Node 2i - Preamp/DAC: Benchmark DAC2 DX - Amp: Parasound Halo A21 - Speakers: MartinLogan Motion 60XTi - Shop Rig: Yamaha A-S501 Integrated - Shop Spkrs: Elac Debut 2.0 B5.2
  • nooshinjohn
    nooshinjohn Posts: 25,628
    VR3 wrote: »
    I have some magnetically confused power cables, the other day they switched to DC and back to AC... can be a real problem with electronics
    Do they at least know which bathroom to use?
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson