Billet RD-0194/8 tweeter plate design.

Options
123457

Comments

  • RandyCroissant
    RandyCroissant Posts: 475
    Options
    Thanks for the likes fellas! Can’t wait to do the 2Bs
    Yamaha RXA1030, Yamaha CD-S2100, Yamaha AS-2200, Bluesound node 2i
    Polk SDA2btl highly modded
    Polk SDA 1C modded
    Polk CS350 LS x2
    Kimber 8TC
    Sony 55" Bravia
    Wish list SVS sub

    · Share on Facebook
  • Orcbolg
    Orcbolg Posts: 7
    edited June 2021
    Options
    Lots of nice work going on here. I've just returned to the forum after a long hiatus. I still have several smaller projects to work on in the future. Keep up the nice work. The information presented makes an interesting read as I learn something that may help me later.
    · Share on Facebook
  • hytekrednek
    hytekrednek Posts: 127
    Options
    I got these for my sda srs 2.3tl pair, along with a custom Vr3 crossover and internal wiring, larry's rings, dynamat, and soon to have the steel semi rings for the mid woofers.
    The rdo 198 tweeters were very easy to install into the billet plates. ZERO REGRETS! Sound is amazing. It was good with oem crossovers, but it sounds amazing now.fm2esm33yzu6.jpg
    xurqu2bjpvdm.jpg
    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    Options
    VSAT88 wrote: »
    @xschop Whats happening Hoss ! When the site took a plunge I did not get back on for a while. Looks like your work has been kickin **** and taking names ! This is some great stuff you are building here man. I finally found 4 Polk MW in Atlanta. One with a slipped magnet so I finally got to try the tool . Quick easy works perfectly. Another original Polk Mid woofer saved from the scrap heap. Drove 4 hours round trip but 30.00 for four MW 6500's was worth it. Well, I did pick up some other stuff while I was out and about you know..

    Sorry for the REALLY late reply, but I did message you on the new forum months ago lol.

    Don't toss burnt-coil MWs, they can be repaired without too much involved... Hit me up with PM if you chime in here in the next few months lmao.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • VR3
    VR3 Posts: 29,752
    Options
    I dig it
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on Facebook
  • VR3
    VR3 Posts: 29,752
    Options
    Love the bling!
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    Options
    Those are exceptional. However they belong in @VSAT88's Sl2000 thread.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • motorstereo
    motorstereo Posts: 2,428
    Options
    Damn; that sucks big time. I'm wondering what your solution is going to be?
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • hytekrednek
    hytekrednek Posts: 127
    Options
    I am still very happy with the 6 plates you made for my rdo198's in my 2.3tl's. Took a while to change the tweets to the plates, but was well worth it. I kind of wish I had anodized mine black, but I just left them raw aluminum, with a coat of wax.
    I would love to get a set of those rings like you have on all your drivers. That looks amazing!
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • xschop
    xschop Posts: 5,856
    edited March 2022
    Options
    I like the way they still project the underlying pattern/patina. Exquisite.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • DarqueKnight
    DarqueKnight Posts: 6,765
    edited March 2022
    Options
    xschop wrote: »
    I like the way they still project the underlying pattern/patina. Exquisite.

    I really like the way the swirl/machining marks catch and reflect light. I briefly had second thoughts about having them anodized because I thought the coating would greatly diminish the pattern and patina. However, if I hadn't had them blacked out, the contrast between the bright aluminum surface and the black finishes on the rest of the speaker would have become grating over time.

    Anodizing actually enhanced the pattern/patina because most of the obscuring glare from the bright metal surface is gone.
    Proud and loyal citizen of the Digital Domain and Solid State Country!
    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    edited March 2022
    Options
    Looking forward to both your and @Toolfan66's install pics. Beautifull works of sound and art these classics can be.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    Options
    Modern Art right there.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    Options
    You'll need one of the forum cheat codes to view.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • F1nut
    F1nut Posts: 52,406
    Options
    Toolfan66 wrote: »
    Where did my picture go?

    When you edited your post you did something wrong.
    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    Options
    Did you have to pay randsom for your pics?
    A friend wants to see the art too.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • F1nut
    F1nut Posts: 52,406
    Options
    Rob has been a busy boy.
    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    Options
    Another beautiful anodization job. Also looking forward to your CRS+ install impressions.

    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    Options
    Toolfan66 wrote: »
    Where did my picture go?

    Where's your install pics? Got to build another 1-piece X-over plate to match tweeters and the red anodized is popular.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • F1nut
    F1nut Posts: 52,406
    Options
    Flash
    9k57pjtds6cm.jpg

    No flash
    bocdxmc7qbcl.jpg

    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    Options
    Damn, they exist. ;)
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    Options
    xschop wrote: »
    Last tidbit detail. I machined the coil lead channels to accommodate any common 1/2" wide electrical tape.(White tape used as reference) Simply snip 1.25" lengths for each side and place over wire lead while slightly overlapping silk dome fabric.....

    cx9dl0m81ag9.jpg

    ndm779au8o95.jpg

    dex321e0qnh0.jpg


    Bump for those asking about the swap procedure...

    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    Options
    Bumping for @Tonofuns
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,856
    Options
    If anyone wants a set in solid bronze, chime in so I can price a group-buy on these. I can start them around 1st Oct.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • drop1
    drop1 Posts: 92
    edited September 2024
    Options
    I would be interested in 2 for my SDA 2b (RD0198) if it's not too much trouble. If available for a forum newb, that is.
    · Share on Facebook