What did you do to your stereo rig today?

14243454748198

Comments

  • verb
    verb Posts: 10,176
    So today is day 2 with these little guys, and having fun! They sound great! More critical listening is store for sure, but one thing I noticed almost immediately was the lower end was better, Seemed to be extended and a bit tighter compared to the Antique Sound Labs monoblocks.

    Shpongle putting em through the test!
    cnui8fm22n1a.jpg

    Another surprise for me was that these little heaters never really got that hot! Warm yes, concentrated toward the center of the heatsink, but not bad to the touch. Even after about 90 minutes of playtime. So, IMO no need for special measures to manage the heat.

    Having fun for sure! Loving these little guys! :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • mhardy6647
    mhardy6647 Posts: 34,910
    looks purposeful.

    :)
  • nooshinjohn
    nooshinjohn Posts: 25,877
    jdjohn wrote: »
    Got a used Micro Seiki MA-505 tonearm :) Yeah, it's missing a couple of bits, but those have been procured and are in transit. Bearings are in perfect working order. Ok, it's a little rough around the edges, but I got a good deal on it, and it should clean up enough to suit me. I'm much more about function over form when it comes to cosmetic issues, but that's just me.
    6qahlnd7aqp7.jpg
    jk6ldn44rt3f.jpg
    4g0tesgxnfmt.jpg

    Spend some time with a good detailer and the proper tools and it should shine up like new. Good score.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2800 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson


    How many flies need to be buzzing a dead horse before you guys stop beating it?
  • jdjohn
    jdjohn Posts: 3,315
    edited May 2019
    Thanks! Detailing is my specialty B) I like Peek cream or paste for polishing. It has diamond dust mixed into it. Greased Lightning is my go-to de-grimer for anodized aluminum oxidation as a first step. Unfortunately, I can't fix pitting :( Also need to clean and re-lube the VTA section.
    ev8my7ydfdsd.jpg
    It is all a little sticky, and not working as intended.
    "This may not matter to you, but it does to me for various reasons, many of them illogical or irrational, but the vinyl hobby is not really logical or rational..." - member on Vinyl Engine
    "Sometimes I do what I want to do. The rest of the time, I do what I have to." - Cicero, in Gladiator
    Regarding collectibles: "It's not who gets it. It's who gets stuck with it." - Jimmy Fallon
  • nooshinjohn
    nooshinjohn Posts: 25,877
    You can take the pitted parts and have them reworked if you want to go that deep taking it apart.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2800 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson


    How many flies need to be buzzing a dead horse before you guys stop beating it?
  • Willow
    Willow Posts: 11,215
    Willow wrote: »
    I replaced my Rotel transport with my Marantz. The silver face stuck out too much in the sea of black. I ended with cleaner looks and cleaner sound.

    kdbrvzmac3ho.jpg
  • mhardy6647
    mhardy6647 Posts: 34,910
    Willow wrote: »
    Willow wrote: »
    I replaced my Rotel transport with my Marantz. The silver face stuck out too much in the sea of black. I ended with cleaner looks and cleaner sound.

    kdbrvzmac3ho.jpg

    I mean, a broad point black Sharpie could've taken care of that problem.

    :#
  • gyosa
    gyosa Posts: 769

    Tidal HIFI rocks .....

    Why buy CD’s ?

    Bk

    indyhawg wrote: »
    Started a subscription to Tidal...finally. I am wondering WTH took me so long now.

    PS Audio S300 , WiiM Ultra , Yamaha wxc-50 , Salk SuperCharged Songtowers , Kimber Kable 4TC, Sony 48” - BEDROOM

    B&K EX-442 ( it will go in my casket when I die ... ) , PS Audio 4.6 preamp ( old school , but it still jams on ... ) , Eversolo DMP-A6 , Boston Acoustic voyager 7’s - POOL

    Parasound A21, Eversolo DMP-A8 , Kimber Kable 4vs , Ascend Acoustics ELX Ribbon Towers , Sony XBR-A8F 65” OLED - DEN , MAIN system

    Onkyo TX-nr609 , Polk atrium 7 , Boston acoustic sound ware (4) , Boston acoustic sub , B&W center , Sony 65” TV - PATIO
  • Thorton
    Thorton Posts: 1,324
    Added a marine amp to the pontoon. It sounds so much better. Great upgrade.
    _____________________________________________________________________________________________
    Ethernet Filter: GigaFOILv4 with Keces P3 LPS
    Source: Roon via ethernet to DAC interface
    DAC: Bricasti M1SE
    Pre/Pro: Marantz AV8805
    Tube Preamp Buffer: Tortuga TPB.V1
    Amp1: Nord One NC1200DM Signature, Amp2: W4S MC-5, AMP3: W4S MMC-7
    Front: Salk SoundScape 8's, Center: Salk SoundScape C7
    Surround: Polk FXIA6, Surround Back: Polk RTIA9, Atmos: Polk 70-RT
    Subs: 2 - Rythmik F25's
    IC & Speaker Cables: Acoustic Zen, Wireworld, Signal Cable
    Power Cables: Acoustic Zen, Wireworld, PS Audio
    Room Treatments: GIK Acoustics
  • BlueFox
    BlueFox Posts: 15,251
    Not to sound stupid, but what is a ‘marine amp to the pontoon’? It sounds aquatic.
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • BlueFox
    BlueFox Posts: 15,251
    Okay. Thanks. We went from land stereos to boats. :)

    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • Thorton
    Thorton Posts: 1,324
    Thanks ZLTFUL

    jgihppcuca43.png
    yde2p0d4aips.png
    _____________________________________________________________________________________________
    Ethernet Filter: GigaFOILv4 with Keces P3 LPS
    Source: Roon via ethernet to DAC interface
    DAC: Bricasti M1SE
    Pre/Pro: Marantz AV8805
    Tube Preamp Buffer: Tortuga TPB.V1
    Amp1: Nord One NC1200DM Signature, Amp2: W4S MC-5, AMP3: W4S MMC-7
    Front: Salk SoundScape 8's, Center: Salk SoundScape C7
    Surround: Polk FXIA6, Surround Back: Polk RTIA9, Atmos: Polk 70-RT
    Subs: 2 - Rythmik F25's
    IC & Speaker Cables: Acoustic Zen, Wireworld, Signal Cable
    Power Cables: Acoustic Zen, Wireworld, PS Audio
    Room Treatments: GIK Acoustics
  • indyhawg
    indyhawg Posts: 1,668
    JL Audio....nice job @Thorton.
  • pitdogg2
    pitdogg2 Posts: 26,922
    It's a drinking barge.....
  • cortico
    cortico Posts: 587
    I’m replacing all cables with MIT T2 (period correct), one at a time! :)
  • verb
    verb Posts: 10,176
    Playing with the Acurus A80 after swapping out the power switch last week. Liking it so far! :smile:
    8f2jobewose1.jpeg
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • indyhawg
    indyhawg Posts: 1,668
    edited May 2019
    Following @verbs lead, I built an amp stand for my Stratos Extreme. Excuse the crappy cell phone pics.

    wl2m9x69z1xp.jpg

    yp6cbgjfcbk5.jpg






  • verb
    verb Posts: 10,176
    Looking good Jeff!
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • nooshinjohn
    nooshinjohn Posts: 25,877
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2800 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson


    How many flies need to be buzzing a dead horse before you guys stop beating it?
  • voltz
    voltz Posts: 5,384
    edited May 2019
    wtg! very nice ..I have to use amp stand myself....nice!!!

    oops this was for what Indyhawg was doin! So ROCK on my Man!!!
    2 ch- Polk CRS+ * Vincent SA-31MK Preamp * Vincent Sp-331 Amp * Marantz SA8005 SACD * Project Xperience Classic TT * Sumiko Blue Point #2 MC cartridge

    HT - Polk 703's * NAD T-758 * Adcom 5503 * Oppo 103 * Samsung 60" series 8 LCD
  • indyhawg
    indyhawg Posts: 1,668

    Congrats on that acquisition. I caught a demo of the Sugarcube last year at AXPONA. It was the most impressive thing we saw all day. It has been on my wishlist for a.while now.
  • VR3
    VR3 Posts: 29,384
    Tri Vista dac is about burned in at this point I would guess. Very happy with the results

    https://youtu.be/TBMOgRv0oBU
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • agfrost
    agfrost Posts: 2,460
    jdjohn wrote: »
    Got a used Micro Seiki MA-505 tonearm :) Yeah, it's missing a couple of bits, but those have been procured and are in transit. Bearings are in perfect working order. Ok, it's a little rough around the edges, but I got a good deal on it, and it should clean up enough to suit me. I'm much more about function over form when it comes to cosmetic issues, but that's just me.
    6qahlnd7aqp7.jpg
    jk6ldn44rt3f.jpg
    4g0tesgxnfmt.jpg

    Very nice. I've got a variant (not the 'standalone' unit you have) on my MS DQ-50. Been a fine performer for me.

    28jado559gsf.jpg

    Jay
    SDA 2BTL * McCormack DNA 0.5 amp * Oppo BDP-93 * Modded Adcom GDA-600 DAC * Rythmik F8 (x2)
    Micro Seiki DQ-50 * Hagerman Cornet 2 Phono * A hodgepodge of cabling * Belkin PF60
    Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
  • stangman67
    stangman67 Posts: 2,329
    Cranked it up for the first time in a week or so. Still smiling from ear to ear :)
    2 Channel in my home attic/bar/man cave

    2 Channel Focal Kanta 3 I Modwright SWL9.0 Anniversary Pre I Modwright PH9.0X I Modwright KWA-150SE I VPI Prime Signature w/ Soundsmith Zephyr MIMC I Lumin U2 Mini I North Star Designs Intenso DAC I Audience OHNO ICs/Audience Furutech FP-S55N and FP-S032N Power Cables/Acoustic Zen Satori I Isotek Sirius
  • treitz3
    treitz3 Posts: 19,944
    To answer my own question ~

    Not a damned thing but listen.

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • verb
    verb Posts: 10,176
    Picked this up today from CL. Amish built, 3/4" solid oak. For the office! :smile:
    uf5yvjtfnaxk.jpg
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • verb
    verb Posts: 10,176
    jdjohn wrote: »
    Got a used Micro Seiki MA-505 tonearm :) Yeah, it's missing a couple of bits, but those have been procured and are in transit. Bearings are in perfect working order. Ok, it's a little rough around the edges, but I got a good deal on it, and it should clean up enough to suit me. I'm much more about function over form when it comes to cosmetic issues, but that's just me.
    6qahlnd7aqp7.jpg
    jk6ldn44rt3f.jpg
    4g0tesgxnfmt.jpg

    As a Mechanical Engineer, that thing is one of exquisite beauty! Oh, the engineering drawings, tolerance stack ups, machining and material specifications, testing and validation, I could go on. That would have been a fun project to work on! :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • displayname
    displayname Posts: 1,202
    Received some Wireworld Mini Eclipse 8 speaker cables today. Preparing my self for a little shoot out with my current with my current Zu Libtec speaker cables.
    Analog: Hana ML > MoFi UltraDeck > Bob's Devices Sky 20-S > Sutherland 20/20 w/LPS
    Digital: Cambridge CXC / Streaming > Cambridge CXN v2
    MastersounD Dueventi > Rosso Fiorentino Certaldo or Hifiman EF600 > Hifiman Arya Stealth
    Discogs
  • pitdogg2
    pitdogg2 Posts: 26,922
    edited May 2019
    verb wrote: »
    Picked this up today from CL. Amish built, 3/4" solid oak. For the office! :smile:
    uf5yvjtfnaxk.jpg

    just 6 more of those and it might be enough to cover my CD, SACD collection :D

    I really should put some effort into looking into a boltz system for them.
  • DaveHo
    DaveHo Posts: 3,580
    Rip to NAS and boxem