What did you do to your stereo rig today?

Options
1…178179181183184…206

Comments

  • DarqueKnight
    DarqueKnight Posts: 6,765
    Options
    I said:
    DarqueKnight wrote: »
    The Rossini DAC and Aurender server DO NOT accept 10 Mhz reference clock signals.

    I stand CORRECTED. After further digging in the Aurender's widely scattered online documentation (they do not supply a written manual with the N30SA server), I found this tidbit:

    "Sync with External Clock
    Enable this option when utilizing an external clock like Aurender MC10, MC20, or similar models. For optimal audio quality, 10 MHz Master Clock connections are recommended. Word Clocks that emit clock sync signals at multiples of 44.1 or 48 kHz are also compatible. However, the Word Clock output signal frequency must match the sample rate of the file being played."

    The clock input on the rear of the N30SA server says "WCLOCK", so naturally I assumed this was for a word clock only. I connected the N30SA to the REF10 SE120 and it does indeed accept 10 MHz master clock signal from the REF10 as well as word clock signals from the MC3+USB.

    However, the Rossini DAC only accepts word clock signals. Furthermore, for playback via the AES or SPDIF inputs, the Rossini DAC and the source component must be locked to the same clock. From the Rossini DAC manual:

    "Please note if you lock one of the DAC’s AES or SPDIF inputs to a Master Clock, the
    source equipment (e.g. a CD player) MUST be locked to the same Master Clock,
    otherwise you will experience periodic clicks, dropouts, noises or distortion on the output."

    The above limitation does not apply to the Rossini's USB output. I found the Rossini's AES input to be better sounding than the SPDIF or USB inputs.

    Again, check with Esoteric to verify if the P-01 transport can accept either 10 MHz or word clock input.
    Proud and loyal citizen of the Digital Domain and Solid State Country!
    · Share on Facebook
  • treitz3
    treitz3 Posts: 20,363
    edited April 2024
    Options
    I have been told it does [Edit:] accept a master clock input [End edit] and IIRC, the back panel even states this....but based upon your comments here? I damned sure will verify before an extremely expensive purchase!

    Much appreciated, as this kind of thing gets very complicated quickly.

    If I do need a MC3+USB, so be it but I want to know beforehand. The Mutec SE 120 website on compatibility stated that this one was one of the compatible components, so I never did question it....until now.

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
    · Share on Facebook
  • treitz3
    treitz3 Posts: 20,363
    Options
    3ik4q3ampnal.png

    ynzx869lr4uv.png

    I was able to find that list where I originally verified that it is compatible. The two lists above are the gear that is directly compatible with the Mutec Ref10 SE 120.

    From my understanding, I shouldn't need a Mutec MC3+USB - as the CDP and the streaming system will not be used at the same time and they will both be connected via the SPDIF. If I am understanding this correctly, I would only need one if I were to hook up the DAC via the USB (which I do not plan on doing at this time).

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
    · Share on Facebook
  • skipshot12
    skipshot12 Posts: 2,159
    Options
    Wow, never heard of them but would love to hear them….

    Very nice.
    · Share on Facebook
  • skipshot12
    skipshot12 Posts: 2,159
    edited April 2024
    Options
    Remind me of a couple of JBL wood infused speakers.
    And pioneer’s exclusive speaker?
    · Share on Facebook
  • xschop
    xschop Posts: 5,859
    edited April 2024
    Options
    Removed the ball-bearing isolation feet from the converted 8TL-SDA's. Mineral spirits doesn't harm the vinyl veneer and helps release the glue...

    ftu72z1vgk1z.jpg
    3fjwk2yf02bz.jpg

    i4jv02dmpr4r.jpg

    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,859
    edited April 2024
    Options
    Someone is off their meds if that is off topic lol.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,859
    Options
    Mea Culpa, this should be in "What did I do to my stereo rig today?" :D
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • plastic_avatar
    plastic_avatar Posts: 747
    Options
    Off Topic?

    I didn't even know that was a tag option.

    If it matters (when used correctly), to tag truly off topic posts, I'll go spend a few hours flagging and tagging actual offenders =)

    On topic:

    Mineral spirits for gummy goo on vinyl = good to know.

    And those crazy modded RTA/SDA look neat =)
    The Thrifty Setups in Mah House Big thrifty stereo in the basement w/ my custom SDA-1C (built with help from kind forum members) * Beautiful 1966 MCM GE console upgraded w/ Bluetooth, Dual turntable, and Paradigm speakers in family room * Swanky 1980 Realistic system and great TEAC eq with dancing colored lights in the living room * custom 5B on a system for my Dad * Ye Olde college stereo in the garage
    · Share on Facebook
  • xschop
    xschop Posts: 5,859
    Options
    Acetone would wrinkle the vinyl I'm sure and didn't want to chance it.

    I did add some acetone to the riding mower and it fired right up. Now that's off topic lol.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • CH46E
    CH46E Posts: 3,595
    Options
    I smoked my Ifi Blue Zen tonight!! Accidentally plugged a 12v power supply into it. It calls for 5v. Smells funny now. Crappy pants.
    · Share on Facebook
  • VR3
    VR3 Posts: 29,752
    Options
    I can smell your part, that sucks! Sorry to hear it. Happens to the best of us
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on Facebook
  • treitz3
    treitz3 Posts: 20,363
    Options
    Oh, chit! Sorry to hear that bro'. That bites.

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
    · Share on Facebook
  • CH46E
    CH46E Posts: 3,595
    Options
    $200 mistake. 😢
    · Share on Facebook
  • CH46E
    CH46E Posts: 3,595
    Options
    I pick up some new Monolith stand last week from a member here. Did not know he was a member here until the meet up.

    Thanks to @dorian (hope I got the right one there)
    These are much better than the wood stands I was using. Now I don't worry about my dog knocking them over.

    z06nquzh2rwo.jpg
    · Share on Facebook
  • gmcman
    gmcman Posts: 1,887
    edited April 2024
    Options
    I lowered the center shelf of the A/V stand.

    ro3o1gjaivxk.jpg


    This is because I finally pulled the trigger on a PSA Directstream Mk1...need to make it fit. Factory Refurbished from TMR, been really going back and forth with either a preamp or DAC to take this setup a few more feet down the rabbit hole.

    I was debating a R2R, either the Pontus 2 or a Venus 2 but the DS with it's current pricing seems like a no brainer....have to finally get ears on one.

    Was scheduled to arrive monday, but I double checked today and it has moved to Sunday... B)



    · Share on Facebook
  • machone
    machone Posts: 1,588
    Options
    Switched from Tidal to Qobuz. Tidal no longer works with LMS/Picoreplayer or is beyond my understanding as how to make it work.
    So goodbye Tidal.
    To my delight I can confirm without a doubt that Qobuz sound quality is better.
    Mojo Audio Illuminati v3>>Quantum Byte w/LMS>>Rpi/PiCoreplayer>> Starlight 7 USB >> Mojo Audio Mystique v2 SE>>ModWright SWL 9.0 SE Signature>>Hafler DH-500 Amp+ (Musical Concepts Fully Modded)>>
    SRS 2.3TL (Fully Modded)...Velodyne Optimum 8 subwoofer
    1KVA Dreadnought

    Marantz SA 8005
    Pioneer PLX-1000 Turntable - Shure SC35C/N35X - V15III/VN35HE
    Yamaha TX-540 Tuner...Sony BDP-S570
    Sony PS4

    Separate subpanel with four dedicated 20 amp circuits.
    1. Amplification 2. Analog 3. Digital 4. Video

    "All THAT IS LOST FROM THE SOURCE IS LOST FOREVER"
    · Share on Facebook
  • billbillw
    billbillw Posts: 8,308
    Options
    CH46E wrote: »
    I pick up some new Monolith stand last week from a member here. Did not know he was a member here until the meet up.

    Thanks to @dorian (hope I got the right one there)
    These are much better than the wood stands I was using. Now I don't worry about my dog knocking them over.

    z06nquzh2rwo.jpg

    Have you mass loaded them yet? I have the same set. I filled all the legs with aquarium gravel. It was tedious, but probably took no more than an hour to do both. It helped to take the ring away from the legs (if you tap them). Just a dead thunk now. It has to help, right?
    · Share on Facebook
  • CH46E
    CH46E Posts: 3,595
    Options
    billbillw wrote: »
    CH46E wrote: »
    I pick up some new Monolith stand last week from a member here. Did not know he was a member here until the meet up.

    Thanks to @dorian (hope I got the right one there)
    These are much better than the wood stands I was using. Now I don't worry about my dog knocking them over.

    z06nquzh2rwo.jpg

    Have you mass loaded them yet? I have the same set. I filled all the legs with aquarium gravel. It was tedious, but probably took no more than an hour to do both. It helped to take the ring away from the legs (if you tap them). Just a dead thunk now. It has to help, right?

    They are filled with sand. Not sure what kind. There were filled before I picked them up. They are pretty heavy
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • tratliff
    tratliff Posts: 1,896
    Options
    The DP-59L is a very nice table. I also have one of the American versions.
    2 Channel Rosso Fiorentino Volterra II, 2 REL T9x, Norma Revo IPA-140B, Norma Revo DAC-2, Lumin U2 Mini, VPI Prime w/SoundSmith Zephyr MIMC, ModWright PH-150, SonoruS ATR10, AudioQuest Niagara 7000 w/Dragon power cable, WAY power cables for all other sources, WAY Silver 3 Ana+ speaker cables, WAY interconnect cables
    · Share on Facebook
  • skipshot12
    skipshot12 Posts: 2,159
    Options
    I have a Sony PS-x75.
    It’s close to the same as a Denon DP-47f me thinks.
    Servo tonearm, full auto along with record size and speed detection.


    · Share on Facebook
  • xsmi
    xsmi Posts: 1,812
    Options
    tratliff wrote: »
    The DP-59L is a very nice table. I also have one of the American versions.

    Do you still use the built-in RCA cables or have you switched it to RCA jacks?
    2-channel Yaqin B2-T Pre, Emotiva XPA-2 Gen 2, Marantz SA8005, Pro-Ject RPM-10 Turntable, Denon DP-59L Pro-Ject Phono Box DS3B, Polk Audio Legend L800's, AudioQuest Cable throughout.
    · Share on Facebook
  • tratliff
    tratliff Posts: 1,896
    Options
    xsmi wrote: »
    tratliff wrote: »
    The DP-59L is a very nice table. I also have one of the American versions.

    Do you still use the built-in RCA cables or have you switched it to RCA jacks?

    Mine has the original. Would like to upgrade it but I don't use the table much. Its my secondary table and not even hooked up currently.
    2 Channel Rosso Fiorentino Volterra II, 2 REL T9x, Norma Revo IPA-140B, Norma Revo DAC-2, Lumin U2 Mini, VPI Prime w/SoundSmith Zephyr MIMC, ModWright PH-150, SonoruS ATR10, AudioQuest Niagara 7000 w/Dragon power cable, WAY power cables for all other sources, WAY Silver 3 Ana+ speaker cables, WAY interconnect cables
    · Share on Facebook
  • xsmi
    xsmi Posts: 1,812
    Options
    It'll be my secondary as well. As soon as I get my pre-amp up and running I will be hooking it up.
    2-channel Yaqin B2-T Pre, Emotiva XPA-2 Gen 2, Marantz SA8005, Pro-Ject RPM-10 Turntable, Denon DP-59L Pro-Ject Phono Box DS3B, Polk Audio Legend L800's, AudioQuest Cable throughout.
    · Share on Facebook
  • tratliff
    tratliff Posts: 1,896
    Options
    xsmi wrote: »
    It'll be my secondary as well. As soon as I get my pre-amp up and running I will be hooking it up.

    I like the semi automatic functionality of it. When I am not paying as close of attention as normal I don't have to worry about getting the tonearm at the end of a side.

    Also, I have a MM cart on it and a MC on my other table. My phono pre has 2 inputs and I can flip back a forth.
    2 Channel Rosso Fiorentino Volterra II, 2 REL T9x, Norma Revo IPA-140B, Norma Revo DAC-2, Lumin U2 Mini, VPI Prime w/SoundSmith Zephyr MIMC, ModWright PH-150, SonoruS ATR10, AudioQuest Niagara 7000 w/Dragon power cable, WAY power cables for all other sources, WAY Silver 3 Ana+ speaker cables, WAY interconnect cables
    · Share on Facebook
  • invalid
    invalid Posts: 1,559
    Options
    Just picked up this hybrid amppoc880hr53uu.jpg
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.