Candy store for OPPO owners?
Options
Comments
-
Just to be clear I removed a total of 14 (yes you read that right-FOURTEEN) cables and two USB sticks front and rear from this thing in order to pull it out
-
First step is removing the 9 screws holding the top in place on the back
Then four more on the sides (two per side) -
This content has been removed.
-
Lift off the top panel -
Then out come the screws for the rca sockets holding the audio board above the transport and power boards
-
I’m using separate cups so I can halfway recall where all of this stuff goes again.
One of the screws holding that board is different from all of the others
What looks like a machine screw versus the other screws and it goes here👇🏾
-
Then out come the screws and cables holding this board in place. There are two round black plastic standoffs which hold the top cover up. You take off the plugs at the top and insert the screwdriver inside to remove those screws -
Then out comes that board -
-
Basically what I am doing here is watching the instructional video that I posted here in the thread from Clones Audio on YouTube while I am doing this step by step on my tablet and the pic blogging with my phone as I go along.
-
Then out come the 4 screws that hold the center barrier between the power supply and transport sections -
-
Next are the two screws holding the ac socket -
Next up are the six screws holding the cover for the switching power supply board. Three silver at the bottom and three black at the top. -
Out comes that board exposing the switching power supply
-
Time for a lunch break!
-
This goes in after I get my blood sugar back up -
Why don’t you post some pictures?Lumin X1 file player, Westminster Labs interconnect cable
Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
Magico S5 MKII Mcast Rose speakers; SPOD spikes
Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
Shunyata Sigma XLR analog ICs, Sigma speaker cables
Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables
Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
Three 20 amp circuits. -
nooshinjohn wrote: »I have just three connected to mine, plus the power cord.
@nooshinjohn That's what I originally had. Then I decided to use the analog outs.
Then some MIT RCA cables came up for sale on the forum and everyone knows I just loves me some MIT!
Then some MIT XLR cables go up for sale........................................ah you get the point!
-
-
This content has been removed.
-
More pics please and use italics to explain themMy New Year's resolution is 3840 × 2160
Family Room| Marantz AV7704| Usher Dancer Mini - 2 DMD Mains |Usher Dancer Mini-x DMD's Surrounds | Usher BE-616 DMD Center | SVS Ultra Rear Surrounds | Parasound Halo A21 | Parsound Halo A52+ | MIT Shotgun S3's | Dual SVS SB 4000 Ultras | Oppo UDP 203 | Directv Genie HD DVR | Samsung 75" Q8 QLED | PSAudio Stellar GCD | Mytek Brooklyn DAC+ | Lumin U1 Mini | HP Elite Slice PC | ROON'd for life |
ManCave: HT:Polk LSiM 706VR3 LSiM 703's LSiM 702's|| Marantz AV7002 AV PrePro Sunfire TGA-7401| Sony PS4 Pro| Sony PS4 Pro|SVS PB13 Ultra| Oppo UDP 203 | Music Hall MMF 5.3se TT w/ Soundsmith Carmen | Samsung 55" SUHD TV | Sony PS4
Patio | Polk Atrium 8's | Yamaha R-N303BL |
Office BlueSound Node| KEF LS50 | Peactree Nova 125SE |
Bedroom | Focal 905's | Chromecast Audio |
Garage | Polk Monitor 5B's
Closet Yamaha M80 | 2 Polk MP3K subs| Yaqin MC100B with Shuguang Treasures KT 88's & CV181Z's | Tesla E83CC's | Marantz 2252B | Marantz 2385 |Polk SDA SRS 2.3 | LSiM 705's | -
Peanut Butter and Jelly sammiches
Happy now boys??? -
Mikey081057 wrote: »More pics please and use italics to explain them
I just cannot please you people!!!
Tito :'(
Get me some tissue -
Four sets of cables on Molex connectors to disconnect -
Then finally four screws and out she comes
-
-
This content has been removed.
-
Old versus new -
I was wondering what that hole in the middle of the base of the new one was for and now I know
