She slides right into place perfectly.
However the toroids are touching. I wonder if I’ll be able to get that cover back on?
They say in the video you can leave it off if you want once the new supply is installed.
Of course the video is now three years old and they weren't using a toroidal transformer then that hangs over the edge of the board.
Okay screwed in and the connectors are all back in place. Time to put it all back together. @nooshinjohntrust and believe this was all a LOT easier than it will be reinstalling this in the system with all dem cables
Just want to thank the op @Mikey081057 for starting this thread. I never would have known about oppomod or accidentally found out about clones audio had you not started this thread.
You have to remember which screws go where. Two of the screws for that center barrier are different. One is black and goes on the back of the unit to hold it in place. Another has a washer and goes into the top at the front. The other two go into the bottom. I kinda lost track because I had all of the screws in order in the cups, but because I cannot put the black power supply cover back in place I needed to remember which cup had what screws in it and take that cup that had the power supply cover screws out of the way
Best to use a magnetic screwdriver so you don’t drop any of them inside the unit. Don’t forget the two plastic standoffs that have the rubber caps that go into their tops to hold the top cover up. That blue ribbon cable is easy to get out, but a major pita to get back in, because it isn’t attached to a plastic clip. It stands by itself once you remove it and is really easy to bend trying to reinstall.
The ones on this board are mostly Elna and a couple of Acons
This is for your electronics wiz geeks who know more about this kind of thing than I do.
The Acons👆🏾
Big Elnas👆🏾
John I would LOVE to get a side by side from you if you decide to go this route and upgrade your 205. I wanna know what it sounds like compared to yo big ****$ Krell.
Okay time to put this thing back in.
FUN TIMES!!
I took some pics of the screen with my Avatar Blu-ray box set playing before the upgrade earlier today and I will do back to back comparisons.
Sorry none of this is gonna be 4K as I do not yet a 4K display. Still waiting for all of the stuff promised for this year at CES to come to fruition (AND I gotta save up the money/get my credick skraight)
Okay to say reinstalling alla dem cables was a pita was an UNDERSTATEMENT
It is done and time to turn it on and check the channels to make sure it is done right/left
Some of this may be difficult if not impossible to see here because of whatever processing the iPhone 7 camera is doing to the 1080p picture on the screen.
Comments
John
Click on the link that I sent you in your SACD thread and get to buying!
Meantime PATIENCE GRASSHOPPER
(happy now mikey???
Family Room| Marantz AV7704| Usher Dancer Mini - 2 DMD Mains |Usher Dancer Mini-x DMD's Surrounds | Usher BE-616 DMD Center | SVS Ultra Rear Surrounds | Parasound Halo A21 | Parsound Halo A52+ | MIT Shotgun S3's | Dual SVS SB 4000 Ultras | Oppo UDP 203 | Directv Genie HD DVR | Samsung 75" Q8 QLED | PSAudio Stellar GCD | Mytek Brooklyn DAC+ | Lumin U1 Mini | HP Elite Slice PC | ROON'd for life |
ManCave: HT:Polk LSiM 706VR3 LSiM 703's LSiM 702's|| Marantz AV7002 AV PrePro Sunfire TGA-7401| Sony PS4 Pro| Sony PS4 Pro|SVS PB13 Ultra| Oppo UDP 203 | Music Hall MMF 5.3se TT w/ Soundsmith Carmen | Samsung 55" SUHD TV | Sony PS4
Patio | Polk Atrium 8's | Yamaha R-N303BL |
Office BlueSound Node| KEF LS50 | Peactree Nova 125SE |
Bedroom | Focal 905's | Chromecast Audio |
Garage | Polk Monitor 5B's
Closet Yamaha M80 | 2 Polk MP3K subs| Yaqin MC100B with Shuguang Treasures KT 88's & CV181Z's | Tesla E83CC's | Marantz 2252B | Marantz 2385 |Polk SDA SRS 2.3 | LSiM 705's |
Amazing base
How sweet will be the sound??
She slides right into place perfectly.
However the toroids are touching. I wonder if I’ll be able to get that cover back on?
They say in the video you can leave it off if you want once the new supply is installed.
Of course the video is now three years old and they weren't using a toroidal transformer then that hangs over the edge of the board.
Okay screwed in and the connectors are all back in place. Time to put it all back together.
@nooshinjohn trust and believe this was all a LOT easier than it will be reinstalling this in the system with all dem cables
Oh this is fargon highlarious
I quite literally cannot put the cover all of the way back in place because of the size of the new toroid!!🤣😂
You have to remember which screws go where. Two of the screws for that center barrier are different. One is black and goes on the back of the unit to hold it in place. Another has a washer and goes into the top at the front. The other two go into the bottom. I kinda lost track because I had all of the screws in order in the cups, but because I cannot put the black power supply cover back in place I needed to remember which cup had what screws in it and take that cup that had the power supply cover screws out of the way
Best to use a magnetic screwdriver so you don’t drop any of them inside the unit. Don’t forget the two plastic standoffs that have the rubber caps that go into their tops to hold the top cover up. That blue ribbon cable is easy to get out, but a major pita to get back in, because it isn’t attached to a plastic clip. It stands by itself once you remove it and is really easy to bend trying to reinstall.
Upon closer inspection I see the caps on that board are all made by Elna
The ones on this board are mostly Elna and a couple of Acons
This is for your electronics wiz geeks who know more about this kind of thing than I do.
The Acons👆🏾
Big Elnas👆🏾
I swear by my life and my love of it that I will never live for the sake of another man, nor ask another man to live for mine.” .
“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
And your Krell?...need update
Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC
erat interfectorem cesar et **** dictatorem dicere a
Easy part is done.
Now to try putting all FOURTEEN cables back in the right places.🤦🏽♂️
I gotta do this AGAIN when the BD-ROM stabilizer comes back.
Stop trying to derail his thread man. WTH is wrong with you?
I swear by my life and my love of it that I will never live for the sake of another man, nor ask another man to live for mine.” .
“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
I do what I can...
I swear by my life and my love of it that I will never live for the sake of another man, nor ask another man to live for mine.” .
“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
Ju fargon aisehole!
Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC
erat interfectorem cesar et **** dictatorem dicere a
Okay time to put this thing back in.
FUN TIMES!!
I took some pics of the screen with my Avatar Blu-ray box set playing before the upgrade earlier today and I will do back to back comparisons.
Sorry none of this is gonna be 4K as I do not yet a 4K display. Still waiting for all of the stuff promised for this year at CES to come to fruition (AND I gotta save up the money/get my credick skraight)
It is done and time to turn it on and check the channels to make sure it is done right/left
I swear by my life and my love of it that I will never live for the sake of another man, nor ask another man to live for mine.” .
“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
John ima gowna fargon cut off Ju head an shove it in ju aisehole ju fargon bastage!!😝😝
Before upgrade👆🏾
After upgrade👆🏼
Before upgrade👆🏼
After upgrade 👆🏾
I swear by my life and my love of it that I will never live for the sake of another man, nor ask another man to live for mine.” .
“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
Before👆🏾
After👆🏼
I swear by my life and my love of it that I will never live for the sake of another man, nor ask another man to live for mine.” .
“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”