Post a picture... any picture

Options
1101110121014101610171153

Comments

  • Tony M
    edited December 2023
    Options
    Toolfan66 wrote: »
    8m3muumczvh8.jpeg

    I missed a pr. on Craig's list or Facebook marketplace. about a year or less ago. It had just been posted 2 hrs. (I think) before I saw the ad for very little money $125 to $250 max I think.

    I responded I wanted to buy them. They responded, sorry, they're sold. :s

    I think I posted on here about that miss. I was that (-) close! :D
    Most people just listen to music and watch movies. I EXPERIENCE them.

    “Anger is an acid that can do more harm to the vessel in which it is stored than to anything on which it is poured.”
    --Mark Twain.

    “If at first you don't succeed, then skydiving definitely isn't for you.” - Steven Wright
  • Toolfan66 wrote: »
    t6vqoiweu6x1.jpeg

    Don’t remember if I posted this..

    Why?
  • skipshot12 wrote: »
    Toolfan66 wrote: »
    t6vqoiweu6x1.jpeg

    Don’t remember if I posted this..

    Why?

    To win competition trophies and cash maybe? :|
    Most people just listen to music and watch movies. I EXPERIENCE them.

    “Anger is an acid that can do more harm to the vessel in which it is stored than to anything on which it is poured.”
    --Mark Twain.

    “If at first you don't succeed, then skydiving definitely isn't for you.” - Steven Wright
  • y3j54h12iatd.png

    Hifihaven
  • mhardy6647
    edited December 2023
    Options
    Viking64 wrote: »
    94aj5iqj1khi.jpg
    Rudolph! You have so much to live for. Don't do it!
    :#
    Meanwhile, elsewhere up in the frozen white north...
    vcmgb5pjfayd.png
  • That '70's HOT!! pic above is Jane Seymour....she was a crush....still got it in her 70's

    h5yw0uhddzbf.png

    kzaemi6clqrx.png

    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC

    erat interfectorem cesar et **** dictatorem dicere a
  • WTH is going on here?

    dfwh77uxxu2x.jpeg
  • Toolfan66 wrote: »
    WTH is going on here?

    dfwh77uxxu2x.jpeg

    It’s how a Tie fighter is born.

    It’s going to grow up to be a majestic star fighter, that will get easily blown up by a X-Wing fighter…
  • pitdogg2
    edited December 2023
    Options
    Toolfan66 wrote: »
    nst41jmwk1i4.jpeg
    8rfmebznpb04.jpeg

    She really makes those shoes look HOT!!
  • Toolfan66 wrote: »
    0x3zm8tvj56r.jpeg

    Vintage Boston
    “Human beings are born with different capacities. If they are free, they are not equal. And if they are equal, they are not free.”
    ― Aleksandr Solzhenitsyn
  • Toolfan66 wrote: »
    WTH is going on here?

    dfwh77uxxu2x.jpeg

    Probably for heating up the housing to install new bearing races and seals. If you put the races and seals in the deep freezer they will slide right in.
    Gustard X26 Pro DAC
    Belles 21A Pre Upgraded with Mundorf Supremes
    B&K M200 Sonata monoblocks refreshed and upgraded
    Polk SDA 1C's modded / 1000Va Dreadnaught
    Wireworld Silver Eclipse IC's and speaker cables
    Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)


    There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus
  • msg
    Options
    Toolfan66 wrote: »
    0x3zm8tvj56r.jpeg

    Nickelback?
    Creed?
    I disabled signatures.
  • msg
    Options
    Toolfan66 wrote: »
    WTH is going on here?

    dfwh77uxxu2x.jpeg

    Cooking a pumpkin?
    I disabled signatures.
  • msg
    Options
    Toolfan66 wrote: »
    nst41jmwk1i4.jpeg
    8rfmebznpb04.jpeg

    Jfc, look at her quads...
    You know she squats a lot. Makes sense when you see those jumps she does.
    I disabled signatures.
  • SCompRacer
    edited December 2023
    Options
    Toolfan66 wrote: »
    WTH is going on here?

    Possibly attempting 'seasoning' (heat treating) the cast iron?

    The pinion bearing races are easy to knock out with a drift punch, alternating side to side. Installing the differential bearing preload shims can be easier with a case spreader, though you can use steel shims and drive them in with a punch.

    The factory uses a case spreader and typically used ground flat cast-iron shims to set ring gear backlash and bearing preload. Those cast shims can crack easily if you pound them in under tension. If you replace diff bearings, tolerance stack ups can make the OEM cast shims useless for preload and setting backlash.

    Removable third members typically have screw adjusters for backlash/bearing preload.

    The pictured diff housing uses a full-floating axle. On a full floater, a spindle is attached to the outer end of the axle housing. The wheel hub is mounted on this spindle and rides on tapered roller bearings. It is this assembly that carries the vehicle weight. A full-floating axle system is considerably stronger than an equivalently sized semi-floating system. Semi-float the axle rides on a bearing in diff housing and the wheel bolts directly to it.

    92k4rv21unce.png

    o1ypdnrmxjwc.png

    cifodiy7d9yr.png

    z3ercjbk619b.png

    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • Toolfan66 wrote: »
    WTH is going on here?

    dfwh77uxxu2x.jpeg
    Rotisserie!!!
    "This may not matter to you, but it does to me for various reasons, many of them illogical or irrational, but the vinyl hobby is not really logical or rational..." - member on Vinyl Engine
    "Sometimes I do what I want to do. The rest of the time, I do what I have to." - Cicero, in Gladiator
    Regarding collectibles: "It's not who gets it. It's who gets stuck with it." - Jimmy Fallon