Never thought the day would come.....new speakers once again.

Those of you who have followed my audio journey over the years, pretty much knew my speaker buying days were over. My current Tyler Acoustic Linbrook Signature Series Reference speakers were part of a three and a half year project that brought it down to the shell, reconditioned the speaker, sealed the internals, took out the crossovers and made a custom, one of a kind, external crossover chassis with all upgraded parts.

Well, I just purchased a pair of Ty's TOTL speakers.....the Woodmere's.

30452bmmc0pf.png


I will be headed up to New York sometime in the near future to pick them up. Woot-woot!

The finish is Italian Santos Rosewood and in beautiful condition with no obvious flaws. The drivers are all top of the line made by Seas, see list below.

2-10-INCH SEAS STATE OF THE ART CONE ALUMINUM WOOFERS

2-7-INCH SEAS MAGNESIUM MID-RANGES

1- 1-INCH MILLENNIUM TWEETER

Crossover components are all of the highest quality using the following:

HOULAND CAPS & ALPHA-CORE INDUCTORS WITH CARDAS WIRING
AND CARDAS TRI-WIRE BINDING POSTS


Dimensions: 75”H X 18”W X18”D

Frequency Response: 22 – 25k

Sensitivity is 93db with a power handling of 50-400 watts.

Weight is 250lbs. per speaker.


Tom
~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
«13456789

Comments

  • VR3
    VR3 Posts: 27,965
    Yes!!!!!

    Congrats!
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • msg
    msg Posts: 9,306
    Nice, Tom! Congrats!
    I didn't really get a sense of scale from the photo until I read the specs you posted with the driver sizes. And, of course, the dims and weight :D
    I disabled signatures.
  • WagnerRC
    WagnerRC Posts: 2,138
    edited October 2022
    Congrats Tom. That is an awesome score! fantastic price too
  • treitz3
    treitz3 Posts: 18,230
    Agreed. I think I paid the same amount for the Linbrooks I have. I'm not looking forward to moving them but I am looking forward to how they sound when paired with my Musical Fidelity KW750 amplifier. I'm not quite sure what the nominal ohm rating is but I should be able to push about 1,100 watts of pure, clean power into them if they are around 4 ohms.

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • VR3
    VR3 Posts: 27,965
    The kw750 should power them with no problem I would think
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • VR3
    VR3 Posts: 27,965
    SCompRacer wrote: »
    Congrats! Beautiful speakers! I still have a Tyler calculator from one of the audio shows. And no, I didn't steal his....lol

    xy0hdzq75irc.jpg

    That's kind of cool!
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • Emlyn
    Emlyn Posts: 4,346
    I wonder if the top and bottom woofers cover the same frequency range. Interesting design for sure.
  • VR3
    VR3 Posts: 27,965
    These would be from the era of Ty using madisound leap builds, I am fairly positive they would be a 3 way and wired in parallel or series
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • newbie308
    newbie308 Posts: 674
    Wow! They are stunning! I hope everything goes smoothly with getting them home and setup. I'm curious about the listening position since they are so tall. That's a lot of bass in your face.
    Sources: Technics SL1200MKII | SME3009 Tonearm | Monster Alpha 1 MC cartridge | Oppo UDP203 disk player | Nikko NT-790 analog tuner | Musical Fidelity Trivista 21 DAC | Preamp: Threshold SL-10 | Amplifier: Threshold Stasis 2 | Speakers: Snell Acoustics C/V | Kimber 12-TC bi wire speakers | Analysis plus Oval 1 preamp to amp | Wireworld Eclipse 7 DAC to Preamp | Wireworld eclipse digital IC Oppo to DAC | Audioquest Quartz tuner to preamp |
  • SCompRacer
    SCompRacer Posts: 8,350
    VR3 wrote: »
    The kw750 should power them with no problem I would think

    I agree. Stereophile tested it down to 2 Ohms and the bandwidth decreased slightly, but it didn't die.
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • SIHAB
    SIHAB Posts: 4,491
    Gulp :o
    Congrats they look killer awesome!
    Speakers: Polk Lsim, ATC SCM19 v2, NHT SuperzeroSpeaker Cables: DH Labs, Transparent, Wireworld, Canare, Monster: Beer budget, Bose ears
  • stangman67
    stangman67 Posts: 2,179
    I can feel the music from here! Those look awesome, looking forward to your impressions once you go grab them
    2 Channel in my home attic/bar/man cave

    2 Channel Focal Kanta 3 I Modwright SWL9.0 Anniversary Pre I Modwright PH9.0X I Modwright KWA-150SE I VPI Prime Signature w/ Soundsmith Zephyr MIMC I Lumin U2 Mini I North Star Designs Intenso DAC I Audience OHNO ICs/Audience Furutech FP-S55N and FP-S032N Power Cables/Acoustic Zen Satori I Isotek Sirius
  • treitz3
    treitz3 Posts: 18,230
    What I plan on doing with these is pretty much the same thing I did with the Linbrooks. We will use the same external chasis and *hopefully* most of the same upgraded x-over parts, although the current x-over sounds like it already has some upgrades to it.

    Ty never did like doing upgraded x-over parts but he did it, if a customer requested it.

    I will have to look at what's really in there when I get it and decide where to go/what route to take at that point.

    Gonna be a long ride to go get them, that's fo'sho'...

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • TroyD
    TroyD Posts: 13,077
    Man, that is awesome!
    I plan for the future. - F1Nut
  • Milito
    Milito Posts: 1,907
    Great looking speakers, congrats!
    Yamaha RX-A2070, Musical Fidelity M6si integrated amp, Benchmark Dac1, Bluesound NODE 2i, Audiolab 6000CDT CD Transport, Parasound Zphono USB Phono Preamp, Fluance RT85, Ortofon 2M Bronze, Polk L600's, L400, L900's, RC80i's, SVS 3000 Micro, Audioquest Interconnects and Digital Cables, Nordost Silver Shadow Digital Cable, Cullen Gold and Crossover Series Power Cables, Douglas Connection Alpha 12AWG OCC Speaker Cables, Douglas Connection Alpha Analog Interconnect Cables, Douglas Connection Alpha 11 OCC Custom Power Cable, Signal Power Cable, Furman PL-8C 15 Power Conditioner, Sony 65" 900F, Sony UBP-X700, Fios, Apple TV 4K, Audioquest Chocolate HDMI Cables.
  • boston1450
    boston1450 Posts: 7,438
    Beautiful speakers. Congrats. Hope ya got a forklift :o
    ..
    ..
    ..
    Randy/Maine
  • jdjohn
    jdjohn Posts: 2,987
    I've got wood B) Congrats, Tom!
    "This may not matter to you, but it does to me for various reasons, many of them illogical or irrational, but the vinyl hobby is not really logical or rational..." - member on Vinyl Engine
    "Sometimes I do what I want to do. The rest of the time, I do what I have to." - Cicero, in Gladiator
    Regarding collectibles: "It's not who gets it. It's who gets stuck with it." - Jimmy Fallon
  • nooshinjohn
    nooshinjohn Posts: 25,034
    Make sure you have some trustworthy hands to carry those.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
  • daddyjt
    daddyjt Posts: 2,305
    Make sure you pack some *protection* if you’re venturing into the belly of the beast - NY…;-)
    "Conservative Libertarians love the country, progressive leftists love the government." - Andrew Wilkow


    “Human beings are born with different capacities. If they are free, they are not equal. And if they are equal, they are not free.”
    ― Aleksandr Solzhenitsyn

  • pearsall001
    pearsall001 Posts: 4,981
    Absolutely gorgeous!! End game possibly?? 👍👍
    "2 Channel & 11.2 HT "Two Channel:Magnepan LRSSchiit Audio Freya S - SS preConsonance Ref 50 - Tube preParasound HALO A21+ 2 channel ampBluesound NODE 2i streameriFi NEO iDSD DAC Oppo BDP-93KEF KC62 sub Home Theater:Full blown 11.2 set up.
  • Happy for you! And a SUPER WOW!
    "Sometimes you have to look to the past to understand where you are going in the future"


    Harry / Marietta GA
  • treitz3
    treitz3 Posts: 18,230
    Absolutely gorgeous!! End game possibly?? 👍👍

    Well, that remains to be seen. Most likely though. Back when I was looking at speakers, I fell in love with the Millennial and Revelator tweeters. This would be my 3rd pair of Tyler speakers and my current pair have been with me for the longest stint of any speaker I have ever owned. That fact dawned on me out of the blue yesterday. I have had the Linbrooks for about a decade now.

    Trey's system (VR3) has an element to the reproductive effort that becomes hard to explain. I believe the best word would be the "scale" of the music. Both his and my systems can throw the exact size of a venue with ease but his goes beyond (and this is where it gets hard to describe). His has a presence and scale that can only be done with more displacement on the mains. Yes, the dual Rythmik F25's bring me much closer to the scale he has but I feel that in order to achieve what his rig offers, it has to be on the mains, based upon my experience listening to his rig.

    These utilize the same drivers for the MTM that I have in my Linbrooks but with a huge change to the bass network that will be powered by the clean powered KW750. This is the same amplifier he uses in his rig. I have already had 2 Seas 10" woofers in dual subs in my rig before but they were powered by a 500w plate amp. This will utilize 4 of the 10", incorporated into and crossed over within the mains and no plate amp this time. That amp should have zero issues powering these speakers.

    So, to answer your question? I dunno. I honestly thought I was done when we started in on the 3 and a half year project for the Linbrooks. Only time will tell as to whether these will be the last stop or not. Whether they are or they aren't, my audio journey has been a blast and I will have some fun with them, regardless of the outcome.

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • VR3
    VR3 Posts: 27,965
    Next up is an ANK in your chain

    😜
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • mhardy6647
    mhardy6647 Posts: 32,926
    Given their kerb curb weight, I presume that pick them up is used figuratively in the OP. :#
  • treitz3
    treitz3 Posts: 18,230
    Don't be yankin' my chain....of COURSE their will be an ANK in my chain.

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • tonyb
    tonyb Posts: 32,902
    Nice Tom, they look gorgeous.
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's