SDA CRS+ With an External Crossover Twist.... :-)

Options
1356789

Comments

  • pitdogg2
    pitdogg2
    Options
    Toolfan66 wrote: »
    They sell them that way.. B)

    White is the tweeter.
    Red is the Drivers..

    That is very cool and sexy stuff. I had thought you milled some of that delrin.

    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    Thanks, these will definitely be a one of a kind set of CRS+'s..
    · Share on Facebook
  • nikonik
    nikonik
    Options
    Very creative and with a twist from the ordinary!
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    At home in a blizzard, and I don't have everything to move forward.. :/
    · Share on Facebook
  • Mystery
    Mystery
    edited March 2016
    Options
    Toolfan66 wrote: »
    At home in a blizzard, and I don't have everything to move forward.. :/

    Ya, I'm not digging out either. ;)z7b6szerj82h.jpg

    One car already stuck outside...
    r23ovuymr2j0.jpg

    Klipsch RB81, KG3.5, B&W DM602.5, Polk.
    Subwoofers: Klipsch RW10, Triad ProSub Bronze.
    · Share on Facebook
  • RandyCroissant
    RandyCroissant
    Options
    Save your back It'll be gone in a day or two.
    Yamaha RXA1030, Yamaha CD-S2100, Yamaha AS-2200, Bluesound node 2i
    Polk SDA2btl highly modded
    Polk SDA 1C modded
    Polk CS350 LS x2
    Kimber 8TC
    Sony 55" Bravia
    Wish list SVS sub

    · Share on Facebook
  • FTGV
    FTGV
    Options
    Toolfan66 wrote: »
    kzajs0vwwcab.jpeg

    Seeing double!!!
    Gret looking boxes Larry.I wish I could find something like that for a phono pre I,m working on.
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    ir3xmgpl5c0i.jpeg
    dbbpp3iyvk24.jpeg
    · Share on Facebook
  • Toolfan66
    Toolfan66
    edited March 2016
    Options
    A little Spike P.o.r.n.
    · Share on Facebook
  • BlueBirdMusic
    BlueBirdMusic
    Options
    Really nice sculpture.
    "Sometimes you have to look to the past to understand where you are going in the future"
    Harry / Marietta GA
    m9iutt1ly1yd.png
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    Going to be a good weekend!! B) got the stands back from paint, spikes are done..

    Woo Hoo!!!
    · Share on Facebook
  • Mystery
    Mystery
    edited March 2016
    Options
    Toolfan66 wrote: »
    ir3xmgpl5c0i.jpeg
    dbbpp3iyvk24.jpeg

    That's enough spikes for the whole block. ;)

    Kinda reminds of ammunition.

    Klipsch RB81, KG3.5, B&W DM602.5, Polk.
    Subwoofers: Klipsch RW10, Triad ProSub Bronze.
    · Share on Facebook
  • DarqueKnight
    DarqueKnight
    edited March 2016
    Options
    Spectacular Larry!
    Toolfan66 wrote: »
    I would really like to have the veneer re-done on the cabinets while i have them apart, I just don't know where to go to have it done..

    I had my CRS+ cabinets re-veneered as a local custom cabinet shop.
    Toolfan66 wrote: »
    I have wondered the same thing, but I do see where it makes sense in doing so, but at the same time, most all amps, pre amps, CD players, blue ray players etc. have steel housings..

    You find aluminum chassis as you go up in quality and cost. Higher quality, lower noise electronic circuits are more sensitive to environmental electrical noise, and aluminum is a better shield against such noise, plus, aluminum does not magnetically interact with inductors.

    Proud and loyal citizen of the Digital Domain and Solid State Country!
    · Share on Facebook
  • RandyCroissant
    RandyCroissant
    Options
    Talk about a bed of nails wow!!! fall on those and your done..
    Yamaha RXA1030, Yamaha CD-S2100, Yamaha AS-2200, Bluesound node 2i
    Polk SDA2btl highly modded
    Polk SDA 1C modded
    Polk CS350 LS x2
    Kimber 8TC
    Sony 55" Bravia
    Wish list SVS sub

    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    Thanks Ray,

    I will look for a shop here in town.. B)
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    Just a mock up to get a feel how it will look..

    vdy89m38g8bw.jpeg
    dcqkf6ksbypj.jpeg
    · Share on Facebook
  • ken brydson
    ken brydson
    Options
    0ha2tgg0eezj.jpg
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    ken brydson wrote: »
    0ha2tgg0eezj.jpg

    Haha, me too!! :p
    · Share on Facebook
  • Mystery
    Mystery
    Options
    Toolfan66 wrote: »
    Just a mock up to get a feel how it will look..

    vdy89m38g8bw.jpeg
    dcqkf6ksbypj.jpeg

    I think Polk should hire you.

    Klipsch RB81, KG3.5, B&W DM602.5, Polk.
    Subwoofers: Klipsch RW10, Triad ProSub Bronze.
    · Share on Facebook
  • BlueBirdMusic
    BlueBirdMusic
    Options
    Larry,
    I need a smaller TEC Infrared Gas Grill.

    Could it be used as one?

    Harry - GA
    "Sometimes you have to look to the past to understand where you are going in the future"
    Harry / Marietta GA
    m9iutt1ly1yd.png
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    BlueBirdMusic wrote: »
    Larry,
    I need a smaller TEC Infrared Gas Grill.

    Could it be used as one?

    Harry - GA

    Ha, it might!! :)

    · Share on Facebook
  • shanedrew
    shanedrew
    Options
    I am loving this post!
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    shanedrew wrote: »
    I am loving this post!

    Thanks, It was nice talking to you today...
    · Share on Facebook
  • agfrost
    agfrost
    Options
    I love the turnaround time on your projects, Larry. From imagination to fabrication & finishing in just days...

    Looking good!
    Jay
    SDA 2BTL * McCormack DNA 0.5 amp * Oppo BDP-93 * Modded Adcom GDA-600 DAC * Rythmik F8 (x2)
    Micro Seiki DQ-50 * Mitsubishi LT-30 * Hagerman Cornet 2 Phono
    Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    Well I got the dynamat put down, going to mount a piece of delrin between the 16mh and the crossover board, a piece of delrin will be mounted behind the 16mh as well..

    A little overkill? Maybe, but I have it, so why not.. B)7mb1euax00dg.jpeg
    vdqk6kxilc9w.jpeg
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    agfrost wrote: »
    I love the turnaround time on your projects, Larry. From imagination to fabrication & finishing in just days...

    Looking good!

    Thanks, it's a plus when I have the time in the shop, and a few of my good guys to help me out, and make it happen while I take care of other things as well..
    · Share on Facebook
  • Nightfall
    Nightfall
    Options
    Very impressive sir.
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
    · Share on Facebook
  • Mystery
    Mystery
    Options
    Overkill^2 but we can't expect less from you.

    Klipsch RB81, KG3.5, B&W DM602.5, Polk.
    Subwoofers: Klipsch RW10, Triad ProSub Bronze.
    · Share on Facebook
  • TennMan
    TennMan
    Options
    Very impressive components and metal work. What improvements do you expect in the sound of the CRS+ without the components inside? I realize you will gain some volume inside the cabinet without the crossovers mounted in there but I thought the passive radiator was turned to the volume of the cabinet. Have you taken that into consideration?
    • SDA 2BTL · Sonicaps · Mills resistors · RDO-198s · New gaskets · H-nuts · Erse inductors · BH5 · Dynamat
    • Crossover upgrades by westmassguy
    • Marantz 1504 AVR (front speaker pre-outs to Adcom 555)
    • Adcom GFA-555 amp · Upgrades & speaker protection added by OldmanSRS
    • Pioneer DV-610AV DVD/CD player
    • SDA CRS+ · Hidden away in the closet
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    Thanks, not sure what improvements there will be if any, will just have to wait and see, as far as the internal volume, I'm not messing with that, and if Matt took into consideration the space the crossover would take, than many of us have screwed that up with bigger caps and solen inductors..

    Honestly I don't see taking them out jacking with the tuning of the speakers or the PR's..

    Time will tell, but I think I'm in for a treat, and the best thing is my buddy Brian has a stock set, and we will be doing an A/B shoot out.. B)
    · Share on Facebook