THe Official "Larry's Rings" waiting list

Options
124678

Comments

  • vstarkwell
    vstarkwell Posts: 328
    edited July 2012
    Options
    Hey Larry,

    Your PM box is full, tried to send you a message.
    Monitor 7C's With Tubes
    · Share on Facebook
  • jonicont
    jonicont Posts: 283
    edited July 2012
    Options
    Tweeter brackets here, thank you
    DynaudIo Evoke 30, VPI Prime, Soundsmith Zephyr MKIII, PS audio Stellar phono pre, McCormack DNA 0.5 Gold, ARC LS-17se, Eversolo dmp A8, MIT AVT MA ic’s and speaker cables, ps audio stellar power plant 3
    · Share on Facebook
  • 11tsteve
    11tsteve Posts: 1,166
    edited July 2012
    Options
    just for future reference and informational sake..... if you order tweeter brackets for RTA 11T speakers, there is a cabinet brace directly below the bottom of the tweeter cutout, and the bracket will not fit, so an alternative must be used.
    also, as a result i will have one set of tweeter brackets i will not be using if they may come in handy somewhere else.
    Polk Lsi9
    N.E.W. A-20 class A 20W
    NAD 1020 completely refurbished
    Keces DA-131 mk.II
    Analysis Plus Copper Oval, Douglass, Morrow SUB3, Huffman Digital
    Paradigm DSP-3100 v.2
    · Share on Facebook
  • RickTfromAZ
    RickTfromAZ Posts: 122
    edited July 2012
    Options
    11tsteve wrote: »
    just for future reference and informational sake..... if you order tweeter brackets for RTA 11T speakers, there is a cabinet brace directly below the bottom of the tweeter cutout, and the bracket will not fit, so an alternative must be used.
    also, as a result i will have one set of tweeter brackets i will not be using if they may come in handy somewhere else.

    Trim the bracket and /or the brace. These brackets were designed by Larry to be a universal application. There are very few polk speakers models that have been a 100% drop-in installation on the tweeter brackets. These brackets are worth the additional effort that it may take to install them. There is a post by DK showing the work involved in installing these brackets in a pair 1.2tl's. Good Luck.
    · Share on Facebook
  • F1nut
    F1nut Posts: 52,406
    edited July 2012
    Options
    You can also simply remove the round ends of the tweeter brackets and just use them instead of the entire piece.
    · Share on Facebook
  • 11tsteve
    11tsteve Posts: 1,166
    edited July 2012
    Options
    thanks folks....and F1nut, larry had included some the individual stand-offs/inserts (not sure what people call them) for my PR's and binding post cups, so i used a couple of those to start with.
    i didn't want to ruin the tweeter brackets just in case one pair might be useful to someone.
    Polk Lsi9
    N.E.W. A-20 class A 20W
    NAD 1020 completely refurbished
    Keces DA-131 mk.II
    Analysis Plus Copper Oval, Douglass, Morrow SUB3, Huffman Digital
    Paradigm DSP-3100 v.2
    · Share on Facebook
  • 11tsteve
    11tsteve Posts: 1,166
    edited July 2012
    Options
    Toolfan66 wrote: »
    This^^^^^



    I have plenty!!
    i saw that i could separate the ends, but, as usual, i over-thought things.:cheesygrin:
    Polk Lsi9
    N.E.W. A-20 class A 20W
    NAD 1020 completely refurbished
    Keces DA-131 mk.II
    Analysis Plus Copper Oval, Douglass, Morrow SUB3, Huffman Digital
    Paradigm DSP-3100 v.2
    · Share on Facebook
  • PolkieMan
    PolkieMan Posts: 2,446
    edited July 2012
    Options
    Is there a link to pictures and installation photos.
    Would this be something good to do on my 2.3 tls or my Sda 1c's?
    POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
    POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
    PIONEER PL-510A SONY BDP S5100
    POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
    ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1
    · Share on Facebook
  • ps4y2ch0
    ps4y2ch0 Posts: 33
    edited February 2014
    Options
    I would take a set for monitor 10b's
    · Share on Facebook
  • ps4y2ch0
    ps4y2ch0 Posts: 33
    edited February 2014
    Options
    Is this option still available?
    · Share on Facebook
  • heartystatue
    heartystatue Posts: 329
    edited February 2014
    Options
    The option is still an option but currently out of stock. We are waiting for Toolfan to make some more. He's been very busy as of late. Hopefully soon. BTW welcome to CP.
    HT: LSI15, LSIC, LSIFX, Emo XPA-3:biggrin: Onkyo TXNR809, Sony BDP-S500, PannyDMP-BDT320, MIT S1 SC. Mit 73842dlp
    2ch: SDA-SRS 2.3 Fully modded. BAT VK500 w/batpak, BAT VK5I, Essence HDACC.
    · Share on Facebook
  • SciFiTom
    SciFiTom Posts: 58
    edited February 2014
    Options
    I was not aware that there is an official waiting list. I did put my request in on another post, but would be pleased to put it in here, as well, if this is a central clearinghouse.

    I should like a set of rings for SDA SRS 2.3s, as they become available, please.
    · Share on Facebook
  • Mr_Hz
    Mr_Hz Posts: 176
    edited June 2014
    Options
    I too had posted on a different thread until I found this thread. Please contact me. I'm upgrading a pair of SDA1C's... and I might also have a pair of 2.3TL's to consider... yes an embarrassment of riches..

    Ron/Mr_Hz
    2.3TL's - Living Room
    CRS+'s (4.1 TL's) - Office
    SDA1C's - Famdamly Rm
    SDA1C's - Master Bedroom
    · Share on Facebook
  • DollarDave
    DollarDave Posts: 2,575
    edited June 2014
    Options
    Put me on the list - I used a complete set for my CRS+ 4.1TLs and now need a complete set for my SDA 2B TL's.
    · Share on Facebook
  • gudnoyez
    gudnoyez Posts: 8,227
    edited June 2014
    Options
    If one last run would be made I'm on board for 2 pair of CRS+s and 2Bs so that would make what 12 rings and 6 tweeter brackets, what we're these running when Larry was making them?
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
    · Share on Facebook
  • MHAMBONE
    MHAMBONE Posts: 51
    edited June 2014
    Options
    I could use a set for my 2B's when/if they are available. Please.........
    Mike

    Pioneer SC-05 Receiver
    Polk SDA-2b
    Polk RTA 11TL w/RDO-198's
    Polk RT25i Satelite Speakers
    Polk CS 400 Center Speaker
    Polk PSW 350 Sub Woofer
    Samsung 46" 1080p LCD TV
    · Share on Facebook
  • MarkCianciolo
    MarkCianciolo Posts: 13
    edited July 2014
    Options
    nooshinjohn wrote: »
    1 set of SDA-SRS-1.2TL, and a pair of 12" passive rings. This way I am covered no matter what SDA comes my way in the future.

    These rings are indeed all that, and are the second-most important thing you can do for your speakers besides the cross-over mods. The awesome workmanship of Larry has become the stuff of legend here at CP.

    Has Larry made any lately? Heard they were a one off project. I know I would buy a set for SDA SRS 1.2 today if they were indeed available.
    · Share on Facebook
  • nooshinjohn
    nooshinjohn Posts: 26,177
    edited July 2014
    Options
    Not in a very long time... shoot Larry a pm and ask is all you can do.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2800 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon MiND2 Shunyata Triton/Typhon Rotel RP9400 Turntable

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson

    How many flies need to be buzzing a dead horse before you guys stop beating it?
    · Share on Facebook
  • MarkCianciolo
    MarkCianciolo Posts: 13
    edited July 2014
    Options
    Toolfan66 wrote: »
    Just to give you guys some what of what I'm thinking considering how busy I am at work.. I will more then likely get to these some time in July. So if you guys can hold out that would be great!!

    Doing the cases was easy as I knew I had time to get them done as the guys are still waiting for the transformers..


    I will keep the prices the same as they were before as we have plenty of guys interested...

    Hello Larry,

    I hope all is well. I am new here, but I have known about your rings long before I joined this forum. Are you close to making a run? I too would like to purchase a set of SDA SRS 1.2 sets.

    Mark
    · Share on Facebook
  • MarkCianciolo
    MarkCianciolo Posts: 13
    edited July 2014
    Options
    nooshinjohn wrote: »
    Not in a very long time... shoot Larry a pm and ask is all you can do.

    Thanks John
    · Share on Facebook
  • Dusty B
    Dusty B Posts: 28
    edited July 2014
    Options
    I'll take a set for my sda 1B, please.
    · Share on Facebook
  • Bigerik
    Bigerik Posts: 149
    edited July 2014
    Options
    And I a set for my original RTA 12's. THanks!
    · Share on Facebook
  • tophatjohnny
    tophatjohnny Posts: 4,189
    edited July 2014
    Options
    I feel lucky to have a set in my 1B's, (even though I retired those) the ring project was fun and gives you a sense of security to see how well these lock your drivers tweeters and radiators into place. When you get them installed, you wont be disappointed you waited. Thanks again Larry.
    "if it's not fun, it's not worth it & remember folks, "It's All About The Music"!!
    *****************************
    · Share on Facebook
  • Hermitism
    Hermitism Posts: 4,353
    edited July 2014
    Options
    I'm always hearing about Larry Rings in threads. What is a Larry Ring? Is it something you can catch from a dog or cat, like Ring Worm? Is it a clothing stain around the neck? I heard you can get rings around a tick bite if it has Lyme disease. Does Larry have ticks? Does Larry need to see a doctor? Is there a doctor in this club? For God's sake, will someone help Larry! I must know about these mysterious rings. Are they like crop circles? Are there rings in Larry's yard? Is it jewelry? If I get engaged, should I give her a Larry Ring? Or is it for the ear, like a Captive Bead Ring? Are Larry's ears pierced? Is it a bellybutton ring? If you count Larry's rings, will it tell you how old he is, like rings on trees? And who the hell is Larry? Is it Larry Bird? Does the ring refer to the basketball goal? Larry Flynt? Is the ring a sex toy? Larry Holmes? Is it a reference to the boxing ring? Larry Hagman? Who shot L.R. (Larry's Ring)?
    · Share on Facebook
  • TennMan
    TennMan Posts: 1,266
    edited July 2014
    Options
    Hermitism wrote: »
    I'm always hearing about Larry Rings in threads. What is a Larry Ring? Is it something you can catch from a dog or cat, like Ring Worm? Is it a clothing stain around the neck? I heard you can get rings around a tick bite if it has Lyme disease. Does Larry have ticks? Does Larry need to see a doctor? Is there a doctor in this club? For God's sake, will someone help Larry! I must know about these mysterious rings. Are they like crop circles? Are there rings in Larry's yard? Is it jewelry? If I get engaged, should I give her a Larry Ring? Or is it for the ear, like a Captive Bead Ring? Are Larry's ears pierced? Is it a bellybutton ring? If you count Larry's rings, will it tell you how old he is, like rings on trees? And who the hell is Larry? Is it Larry Bird? Does the ring refer to the basketball goal? Larry Flynt? Is the ring a sex toy? Larry Holmes? Is it a reference to the boxing ring? Larry Hagman? Who shot L.R. (Larry's Ring)?
    Nope, wrong on all counts. Several books were written about Larry that will explain everything. Look for "Lord Of The Rings" in your favorite book store. One of the books entitled "Return Of The King" is the reason this official waiting list was started. :razz:
    • SDA 2BTL · Sonicaps · Mills resistors · RDO-198s · New gaskets · H-nuts · Erse inductors · BH5 · Dynamat
    • Crossover upgrades by westmassguy
    • Marantz 1504 AVR (front speaker pre-outs to Adcom 555)
    • Adcom GFA-555 amp · Upgrades & speaker protection added by OldmanSRS
    • Pioneer DV-610AV DVD/CD player
    • SDA CRS+ · Hidden away in the closet
    · Share on Facebook
  • xjghost
    xjghost Posts: 1,115
    edited July 2014
    Options
    I sent a pm with no response. Than again I also asked if he would share the info and me get them made. Not surprised he did not. I don't know that I would. But was worth a try. I'd like to see how the post connects to the ring.
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's
    · Share on Facebook
  • Sea
    Sea Posts: 317
    edited July 2014
    Options
    If and when these are made again, I would like a set for 1C and 2.3tl including tweeter brackets.
    Main-Carver TFM35(2),Carver C11 ,Carver SD/A 360 CD,Carver TX11 ,Grace Digital Tuner, Pioneer PL707 TT,Polk SDA1C
    Downstairs -Carver M1.5t, Carver C1 Pre, Carver TX10 Tuner, Carver TL3200 CD Player, Dual 1009 TT,Polk SDA SRS 2.3tl
    Study - Carver AV634 Amp, Carver CT7 Pre, Carver DTL50 CD Player, Polk RTA12c
    · Share on Facebook
  • Malbec
    Malbec Posts: 558
    edited July 2014
    Options
    While you're at, how about crankin' out a pair of crossover rings for a set of 1.2tl's. I bought the rings a few years ago.
    Plus I'll tell everyone what a swell guy you are. :)
    · Share on Facebook
  • Sea
    Sea Posts: 317
    edited July 2014
    Options
    Great news Larry. Enjoy your vacation.
    Main-Carver TFM35(2),Carver C11 ,Carver SD/A 360 CD,Carver TX11 ,Grace Digital Tuner, Pioneer PL707 TT,Polk SDA1C
    Downstairs -Carver M1.5t, Carver C1 Pre, Carver TX10 Tuner, Carver TL3200 CD Player, Dual 1009 TT,Polk SDA SRS 2.3tl
    Study - Carver AV634 Amp, Carver CT7 Pre, Carver DTL50 CD Player, Polk RTA12c
    · Share on Facebook
  • Dennis Gardner
    Dennis Gardner Posts: 4,861
    edited July 2014
    Options
    I would take a set for 1Cs and a set for CRS+.

    Thx
    HT Optoma HD25 LV on 80" DIY Screen, Anthem MRX 300 Receiver, Pioneer Elite BDP 51FD Polk CS350LS, Polk SDA1C, Polk FX300, Polk RT55, Dual EBS Adire Shiva 320watt tuned to 17hz, ICs-DIY Twisted Prs, Speaker-Raymond Cable

    2 Channel Thorens TD 318 Grado ZF1, SACD/CD Marantz 8260, Soundstream/Krell DAC1, Audio Mirror PP1, Odyssey Stratos, ADS L-1290, ICs-DIY Twisted , Speaker-Raymond Cable
    · Share on Facebook