Started my new custom SDA's today
Comments
-
Woaa! Lots of dedication there Ben.
I'm going to be in Delray Beach the end of July. I'll probably be able to hear them from there. -
BlueMDPicker wrote: »Woaa! Lots of dedication there Ben.
I'm going to be in Delray Beach the end of July. I'll probably be able to hear them from there.
Come on over! I am 25 minutes from there! Just map quested it:)Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
Where are the finished pics??
Slave driver! I was going to take it easy tonight. Now you got me painting, and preparing the wiring.:mad:Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
Where are the finished pics??
Its 3am here. I need to stop. For your viewing enjoyment here is another pick. The paint is not dry around the speaker holes. That is the gloss look you see. A little clean up, and final temp coat is going on tomorrow.:p May I can go to sleep now?
Thanks benPlease. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
Damnit..Thats what I'm talking about bro!!! Looking great.
My sister lives in Lauderdale , off of 55th str, a couple of blocks from a huge white church, that has a cross 300' high. I dont know if you know where that is. But might be heading there this July.Monitor 7b's front
Monitor 4's surround
Frankinpolk Center (2 mw6503's with peerless tweeter)
M10's back surround
Hafler-200 driving patio Daytons
Tempest-X 15" DIY sub w/ Rythmik 350A plate amp
Dayton 12" DVC w/ Rythmik 350a plate amp
Harman/Kardon AVR-635
Oppo 981hd
Denon upconvert DVD player
Jennings Research (vintage and rare)
Mit RPTV WS-55513
Tosh HD-XA1
B&K AV5000
Dont BAN me Bro!!!!:eek: -
Damnit..Thats what I'm talking about bro!!! Looking great.
My sister lives in Lauderdale , off of 55th str, a couple of blocks from a huge white church, that has a cross 300' high. I dont know if you know where that is. But might be heading there this July.
BenPlease. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
Thats about 5 miles from me. I won't be back here till July 17th, and I am leaving on the 6th. It would be cool to hook up. Is there a golf coarse near that church?
Ben
You know I think there is a rather nice coarse near that church.Monitor 7b's front
Monitor 4's surround
Frankinpolk Center (2 mw6503's with peerless tweeter)
M10's back surround
Hafler-200 driving patio Daytons
Tempest-X 15" DIY sub w/ Rythmik 350A plate amp
Dayton 12" DVC w/ Rythmik 350a plate amp
Harman/Kardon AVR-635
Oppo 981hd
Denon upconvert DVD player
Jennings Research (vintage and rare)
Mit RPTV WS-55513
Tosh HD-XA1
B&K AV5000
Dont BAN me Bro!!!!:eek: -
-
Ben you better hurry up and finish your projects other wise you vacation is canceled.:D LOLengtaz
I love how music can brighten up a bad day. -
Great job Ben! I can't wait to see the crossover!
That will be a work in progress. Most of the XO is going to be passive inline for now, and I will be experimenting with active. There will also be a passive XO in the speaker to roll off higher frequencies, and increase the slope to 24db to help save the tweeters from frying at high power levels. Thanks for the encouragement.
Ben
Oh yeah I should be firing up these thing Monday night:)Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
I used some Decor paint I found at the hardware store. It simulates granite. It look pretty good I wouldn't say that it looks like granite though. Nice speckle job that will be easy to touch up.Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
Oh I likey thata.Monitor 7b's front
Monitor 4's surround
Frankinpolk Center (2 mw6503's with peerless tweeter)
M10's back surround
Hafler-200 driving patio Daytons
Tempest-X 15" DIY sub w/ Rythmik 350A plate amp
Dayton 12" DVC w/ Rythmik 350a plate amp
Harman/Kardon AVR-635
Oppo 981hd
Denon upconvert DVD player
Jennings Research (vintage and rare)
Mit RPTV WS-55513
Tosh HD-XA1
B&K AV5000
Dont BAN me Bro!!!!:eek: -
Its still kinda wet. I knew you wanted me to get them done so...Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
Damn my fingers hurt from driving all the screws with a screw gun! Well Half done installing drivers. Had to play some music in stereo. I hit 120db nice clear, and tight. I'm putting 450 to the tweeters, and 800 to the woofers. Later on tonight I hope to add another 800 to the dim array. We need a custom icon with fingers in the ears here on Polk! Thats a pretty crappy pic. I'll post a better one later:)
Edit The bass is even better than before!Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
Damn This thing sounds good. I can not believe the accuracy, tightness, and SPL levels this thing can reach. I hit 123db. I can't even put it into words. I am my toughest critic if you have read any of my post, but I love this. You just wouldn't believe this. Anyway here is a pic. Almost done. I am going to have to post a video sometime of the 4 10's jumping. Unfreaken real. No spacey out phase crap. I thought I was going to have some issues. Its all good:)Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
HOLY SH$T!!! Those look nothing short of awesome....
-
Thanks Bill. I have to still do some fine tuning. That BS box I built with all those fancy level controls, and switch's was a total waste of time. My big amps require 2 volts for full output and my amp that is driving the tweeters only requires 1.14 for full out. I have no Idea how this ended up working. I did some cable swapping. I have the balanced output converted to unbalanced going to my main woofer, and I have one of those fancy AQ y's splitting to my SDA array, and tweeter amp. You would think by reading the specs that the tweeters would be way over driven. I have no idea how the levels are matched perfectly, and I really don't care. I am happier than a pig in filth! Ye Ha!Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
Those are fantastic. Great job Ben. I do like the kids table as a accostic trap. Take care. great job.engtaz
I love how music can brighten up a bad day. -
!!! you missed your calling you should have been a spk builder!! AA++My HT set-up Panasonic front proj, 120 in ws screen, ATI amp,Integra 9.8 pre-pro, 2 Polk rti150, cp 1000, 4 fx 1000, Pioneer blu-ray 2 SVS sub pb 12-ultra 2, & Paragon popcorn popper. ps 3 Coaster leather HT recliners.
-
Ben, you gonna build me a set after you are done with yours?
JoeAmplifiers: 1-SAE Mark IV, 4-SAE 2400, 1-SAE 2500, 2-SAE 2600, 1-Buttkicker BKA 1000N w/2-tactile transducers. Sources: Sony BDP CX7000es, Sony CX300/CX400/CX450/CX455, SAE 8000 tuner, Akai 4000D R2R, Technics 1100A TT, Epson 8500UB with Carada 100". Speakers:Polk SDA SRS, 3.1TL, FXi5, FXi3, 2-SVS 20-29, Yamaha, SVS center sub. Power:2-Monster HTS3500, Furman M-8D & RR16 Plus. 2-SAE 4000 X-overs, SAE 5000a noise reduction, MSB Link DAC III, MSB Powerbase, Behringer 2496, Monarchy DIP 24/96. -
They look really beautiful.
-
My head hurts. You know how older people have that flab below there arms. Well I had my elbow propped up, and I don't have flab under my arms, but when the speakers hit it feels like my triceps are being blow back, and forth. I hit 124db last night(this morning), and it is definitely way to much for sustained listening. When it hits it really hits.Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
!!! you missed your calling you should have been a spk builder!! AA++
No. They should have never let me out of the nut house!:eek:Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
ben62670 you go for it.
Progress is deviation from the norm. -
Very nice!!"He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
-
Ok, we know how loud it is....lol, but how does it sound? Deminsion drivers doing their job? Soundstage?Monitor 7b's front
Monitor 4's surround
Frankinpolk Center (2 mw6503's with peerless tweeter)
M10's back surround
Hafler-200 driving patio Daytons
Tempest-X 15" DIY sub w/ Rythmik 350A plate amp
Dayton 12" DVC w/ Rythmik 350a plate amp
Harman/Kardon AVR-635
Oppo 981hd
Denon upconvert DVD player
Jennings Research (vintage and rare)
Mit RPTV WS-55513
Tosh HD-XA1
B&K AV5000
Dont BAN me Bro!!!!:eek: -
Very nice! You should let them break in for awhile before getting too crazy. When are you going to build the big pair?
madmaxVinyl, the final frontier...
Avantgarde horns, 300b tubes, thats the kinda crap I want... -
Very nice! You should let them break in for awhile before getting too crazy. When are you going to build the big pair?
madmax
Dude there is no way I am going to build a pair of speakers larger than this. They sound absolutely wonderful. The bass is so strong that it causes me to do a walk around to make sure nothing is on the floor, or fallen down. The length of the array is key to the sound stage. If I were to make any modification to this I would have put one 10 on the bottom, and one 10 on the top. I really don't think that at the low bass levels they put out that there would be any phase issues. The reason I put all 4 10's together like that was to make it seem like one giant woofer, and I have little kids who like to poke speakers. I do not know what would actually sound better. I just can't explain enough how tight the bass is. It hits hard. No booming. The only problem I have is trying to tighten ever thing up in my place. Even the light fixture lenses resonated. The drop ceiling support bars resonate. The bass from this thing digs deeper than my Sono Sub:eek: WIRES DO MAKE A BIG DIFFERENCE! When I figure out the best synergy I will post with what has worked best.
Thanks BenPlease. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
Did you wire the woofers in series/parallel directly or did you taper the sound level at the top and bottom ends? Just wondering.
madmaxVinyl, the final frontier...
Avantgarde horns, 300b tubes, thats the kinda crap I want... -
ben --
Tell us more baout the sound quality. I'd like to hear how it sounds with different types of music. Is it detailed? How low does the bass go? What about soundstage and imaging? Is it bright or laid back? Etc.HT/2-channel Rig: Sony 50 LCD TV; Toshiba HD-A2 DVD player; Emotiva LMC-1 pre/pro; Rogue Audio M-120 monoblocks (modded); Placette RVC; Emotiva LPA-1 amp; Bada HD-22 tube CDP (modded); VMPS Tower II SE (fronts); DIY Clearwave Dynamic 4CC (center); Wharfedale Opus Tri-Surrounds (rear); and VMPS 215 sub
"God grooves with tubes."