Show me your TT's !!!

1456810

Comments

  • nooshinjohn
    nooshinjohn Posts: 25,447
    fxzf3iblbp73.png
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
  • mhardy6647
    mhardy6647 Posts: 33,908
    there seems to be a theme, a leitmotif, if you will, developing this morning...
  • verb
    verb Posts: 10,176
    Yes uncle Jesse sightings all over!
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • msg
    msg Posts: 10,134
    Clipdat wrote: »
    My vinyl/DJ setup powered off with dust covers in place, and then powered up and ready to go.

    The black bag on the lower left is also full of records. And I have another 6 cube storage unit full of vinyl in the other room.
    yhdx49rdjxyh.png
    awww sheet, pardy at Drew's!
    fomtm5yswr96.gif

    I disabled signatures.
  • verb
    verb Posts: 10,176
    Sweet setup!
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • Tony M
    Tony M Posts: 11,163
    edited February 2018
    How heavy could a TT be? Maybe one like John's. Yup, I just read the sentence below the video. It must be just like John's.
    https://www.facebook.com/audiogon/videos/10155028619695740/
    Most people just listen to music and watch movies. I EXPERIENCE them.
  • Clipdat
    Clipdat Posts: 12,952
    Time for her to retire.

    Should've used a dolly or hand truck to get it off the truck and up to the door. Since when does UPS advocate rolling a package like that?

    Yet another reason why I will only use FedEx if possible.
    Tony M wrote: »
    How heavy could a TT be? Maybe one like John's.
    https://www.facebook.com/audiogon/videos/10155028619695740/

  • verb
    verb Posts: 10,176
    Tony M wrote: »
    How heavy could a TT be? Maybe one like John's. Yup, I just read the sentence below the video. It must be just like John's.
    https://www.facebook.com/audiogon/videos/10155028619695740/

    OMG! That is ridiculus! I can only imagine their faces when they opened up the box! Ouch!
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • Clipdat
    Clipdat Posts: 12,952
    I'm surprised they didn't just immediately refuse the shipment, and have her roll it right back down to the truck.

    At least they had a nice high resolution video to submit with the shipping insurance claim.
    verb wrote: »
    OMG! That is ridiculus! I can only imagine their faces when they opened up the box! Ouch!

  • halo
    halo Posts: 5,616
    dr1978 wrote: »
    halo wrote: »
    Technics SL-Q3 w/ Shure M95ED
    hw3na6f5q2kf.jpg

    Bottlehead Reduction Phono pre with Integration upgrade (Amperex white PQ 6922 tubes) & Mahogany base
    35716409261_a1d1ac810d_b.jpg

    Is that the "definitive version" of Fragile that just came out? One of my favorite albums ever and the new version is packaged perfectly and sounds great.
    dr1978 wrote: »
    halo wrote: »
    Technics SL-Q3 w/ Shure M95ED
    hw3na6f5q2kf.jpg

    Bottlehead Reduction Phono pre with Integration upgrade (Amperex white PQ 6922 tubes) & Mahogany base
    35716409261_a1d1ac810d_b.jpg

    Is that the "definitive version" of Fragile that just came out? One of my favorite albums ever and the new version is packaged perfectly and sounds great.
    dr1978 wrote: »
    halo wrote: »
    Technics SL-Q3 w/ Shure M95ED
    hw3na6f5q2kf.jpg

    Bottlehead Reduction Phono pre with Integration upgrade (Amperex white PQ 6922 tubes) & Mahogany base
    35716409261_a1d1ac810d_b.jpg

    Is that the "definitive version" of Fragile that just came out? One of my favorite albums ever and the new version is packaged perfectly and sounds great.

    This is the standard version of the latest 180g 3-record set/release/pressing from the nin.com store. The store had major issues getting these newer releases out to those, like me, who preordered them. The site has periodically been “under maintenance” ever since. The previous release/pressing is said to be not very good. I can’t find any faults with these. I just need a better cart and a SUT to take full advantage! lol.
    Audio: Polk S15 * Polk S35 * Polk S10 * SVS SB-1000 Pro
    HT: Samsung QN90B * Marantz NR1510 * Panasonic DMP-BDT220 * Roku Ultra LT * APC H10
  • SCompRacer
    SCompRacer Posts: 8,507
    edited February 2018
    verb wrote: »
    A unique concept. Making a comeback?
    rsr1p4ytgf4x.png

    I have a vertical table in the downstairs retro system!

    https://youtu.be/T8OjlcJjSEE
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • SCompRacer
    SCompRacer Posts: 8,507
    My air bearing linear tracking a warp...

    https://youtu.be/YYD9CIWJELc
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • SCompRacer
    SCompRacer Posts: 8,507
    edited February 2018
    My Nottingham Space 294 with 12" Moerch DP-6 arm and Wave Mechanic (Nottingham's speed control power supply). FF to 1:30 for the vinyl part... This was my go to table before the Lenco idler drive.

    https://youtu.be/BIJX9TmlaSM
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • dr1978
    dr1978 Posts: 424
    halo wrote: »

    This is the standard version of the latest 180g 3-record set/release/pressing from the nin.com store. The store had major issues getting these newer releases out to those, like me, who preordered them. The site has periodically been “under maintenance” ever since. The previous release/pressing is said to be not very good. I can’t find any faults with these. I just need a better cart and a SUT to take full advantage! lol.

    Yeah, that's the one. I think they branded it the definitive edition. I wanted to do the preorder as soon as they announced it but (luckily it turns out) I didn't have the cash. I heard about the delays but then kind of forgot about it. Hopped on their site not long ago when I ran into some cash and it was available to ship immediately. This just might be the first album I spin once I get my new setup put together.
    Pro-ject 2 Experience SB, OPPO BDP-103, Marantz SR5011, Lounge LCR MKIII, McCormack DNA-HT5, Polk LSiM705, Polk LSiM706C, Polk LSiM702, SVS SB16-Ultra
  • Clipdat
    Clipdat Posts: 12,952
    Awesome Trentemoller album, love that one - have the same vinyl.

    That's a great KLF track as well.

    Nice tune choices sir :)
    SCompRacer wrote: »
    I have a vertical table in the downstairs retro system!
    SCompRacer wrote: »
    My air bearing linear tracking a warp...

  • SCompRacer
    SCompRacer Posts: 8,507
    I had a Yamaha YP-D10 once upon a time...this table had adjustable VTA.

    1dy6pb298ptm.jpg
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • SCompRacer
    SCompRacer Posts: 8,507
    edited February 2018
    Clipdat wrote: »
    Awesome Trentemoller album, love that one - have the same vinyl.

    That's a great KLF track as well.

    Nice tune choices sir :)


    Thanks! Remember Wanda Dee? We likes to have some fun along with serious music!
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • SCompRacer
    SCompRacer Posts: 8,507
    This falls in under..

    * Other gizmos, speed adjust, pitch, anti skip, etc.

    I was trying different turntables and often didn't have protractors for them. This also allowed for marking and drilling arm board - spindle center to center.

    mxva5lt1k7cf.jpg
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • SCompRacer
    SCompRacer Posts: 8,507
    edited February 2018
    *Other gizmos, speed adjust, pitch, anti skip, etc....

    I was a beta tester for the 25 watt Phoenix power supply. The Lenco has a high torque motor, ~ 22 watts. Previously he only offered a 6 and 15 watt controller, IIRC. Adding the RoadRunner tach meant having platter speed automatically controlled.

    The Lenco has 4 speeds. You moved the idler postion for 16, 33, 45 and 78. I olny need 33 and 45, so now I push a button between 33 and 45 speeds instead of moving the idler.

    Sadly he retired and closed shop. His approach was better than some of the previous high dollar analog speed controls. Ones that shifted speed as they warmed up.

    f0jfx99mnjk7.jpg

    v5hp4hjkcm37.jpg

    xce3zbpkr6re.jpg



    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • Jhayman
    Jhayman Posts: 1,548
    My little slice of Heaven

    [/i]sbrkx58oo908.jpg
    ATC SCM40's,VTL TL 2.5 Preamp,PSB Stratus Goldi's,McCormack DNA 500,McCormack MAP-1 Preamp,Pro-Ject Xtension 10 TT,Ortofon Cadenza Red/Nordost RedDawn LS Speaker cables, Bryston BDP-2, Bryston BDA-2,PS Audio AC-3 power cables
  • Jhayman
    Jhayman Posts: 1,548
    ba5t9ku9ywye.jpg
    ATC SCM40's,VTL TL 2.5 Preamp,PSB Stratus Goldi's,McCormack DNA 500,McCormack MAP-1 Preamp,Pro-Ject Xtension 10 TT,Ortofon Cadenza Red/Nordost RedDawn LS Speaker cables, Bryston BDP-2, Bryston BDA-2,PS Audio AC-3 power cables
  • verb
    verb Posts: 10,176
    Sweet TT @Jhayman !
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • verb
    verb Posts: 10,176
    You've been holding out on us @SCompRacer ! Nice TT's! The speed control unit is way cool! Too bad he closed up shop.
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • verb
    verb Posts: 10,176
    SCompRacer wrote: »
    verb wrote: »
    A unique concept. Making a comeback?

    I have a vertical table in the downstairs retro system!

    https://youtu.be/T8OjlcJjSEE

    I knew someone on CP would have one of those babies! What are your thoughts on it? Pros/Cons? Very curious.
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • SCompRacer
    SCompRacer Posts: 8,507
    edited February 2018
    verb wrote: »

    I knew someone on CP would have one of those babies! What are your thoughts on it? Pros/Cons? Very curious.

    It doesn’t see a lot of use in the basement, but it works every time I use it. It was in nice shape, all it needed was a belt, clean and lube. The belt had melted onto the pulleys from age. I view it as more of a curiosity than a daily driver.

    It sounds pretty good, but it can be bested by a horizontal table. You have a long main bearing lying on its side and what can be a finicky arm to repair if it gives you trouble.

    I used to bring it upstairs after folks were intoxicated. If they never seen one before, reactions could be amusing. Heck, sober folks have done great double takes…lol

    The innards...actually pretty well constructed.

    xh1cpdr6tu0a.jpg

    xjotbhstqbjn.jpg


    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • Clipdat
    Clipdat Posts: 12,952
    The vertical turntable thing freaks me out in the same way that The Beatles freak out @msg
  • Viking64
    Viking64 Posts: 7,113
    Clipdat wrote: »
    The vertical turntable thing freaks me out in the same way that The Beatles freak out @msg

    Imagine playing a Beatles album on a vertical turntable? You could shoot arrows at the apple on the Apple Records label as it spun around just like William Tell. That would freak just about ANYONE out.
  • nooshinjohn
    nooshinjohn Posts: 25,447
    I find the thought of The Greatful Dead on a vertical table a bit more freaky...


    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
  • vcwatkins
    vcwatkins Posts: 1,993
    Nothing fancy, but I like it. Kinda hard to make out. It's an RP6 on a Cloud.
    r9hedfjm9vlz.jpg
    b]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • Viking64
    Viking64 Posts: 7,113
    I find the thought of The Greatful Dead on a vertical table a bit more freaky...
    I find the thought of The Grateful Dead on ANY turntable to be disturbing. :p