Post a picture... any picture

16106116136156161153

Comments

  • mhardy6647
    mhardy6647 Posts: 34,921
    f9m2ao7e8100.jpg

    Folks'll put up with spring, summer and winter in northern New England... for fall. :)
  • BlueBirdMusic
    BlueBirdMusic Posts: 2,747
    edited October 2021
    I've been on the Chattooga River in north Georgia in rafts long ago - before the Deliverance movie.
    My first trip was quite an experience, especially going over a small waterfall and puncturing the raft when we became caught on rocks halfway down. My friend and I had walked ahead to view the rapids before proceeding on all previous rapids. At the rapids that caused trouble, there was a group of "real hippies (1970)" camping next to the river. So being tired from more than 6 hours on the river and hearing the water flow ahead, we asked them from our raft in the pool before the rapids if it was safe to proceed.
    They said sure it was okay to continue without walking the raft around the rapids. WOW! They helped us in getting our stuff to shore. These were the only people we saw that day on the river - before the river became so popular.
    It was a long walk carrying our equipment back to our point of departure after reaching a local road through the woods.
    A few years later, five work friends rafting were assaulted by mountain people on the river. This event was after the movie was released, and was reported by the local TV stations.

    One of the better things Jimmy Carter did was backing legislation that prevented dams on the Chattooga River. It still remains wild today but lots of people visit.
    "Sometimes you have to look to the past to understand where you are going in the future"
    Harry / Marietta GA
  • treitz3
    treitz3 Posts: 19,948
    81padv0sq02l.png

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • CH46E
    CH46E Posts: 3,595
    The Pacific Air Show as seen from TV in FL. Thought it was cool to see a P51 and F35 together.

    p6cabuc38ywu.jpg
    5nib6ex1rwjb.jpg
    gyd6haudn09j.jpg
  • Tony M
    Tony M Posts: 11,571
    I think we live right under the military's jets flight path. They 99% of the time fly directly over us coming in and going out too. :p

    Today was special. My wife and I were outside working and 3 smaller size jets roared overhead and banked left just as they passed us. :oB) They were about 10 or 15 seconds apart. So the roar lasted for a good bit. We get jet air shows over us a lot. B)

    We LOVE it when they come in slow...and keep that roar going STRONG and LOUD. :D

    We think they use our big square bright white back-roof as a marker. Normal airplanes seem to fly off to the sides of us.
    Most people just listen to music and watch movies. I EXPERIENCE them.

    “Anger is an acid that can do more harm to the vessel in which it is stored than to anything on which it is poured.”
    --Mark Twain.

    “If at first you don't succeed, then skydiving definitely isn't for you.” - Steven Wright
  • rebelsoul
    rebelsoul Posts: 756
    My old ps audio 200cx power caps 15,000 . Replaced with higher grade 33,000 caps when had rebuilt and modded.q9w4vsmxdats.jpg
  • Those Mallory CGS (computer grade series) can last for many years with no leakage or change of value as long as they have a fairly heat free environment.
  • sjhoa0jphvgb.jpeg

    My wife getting a ride in a Fairchild PT-19 pilot trainer named Miss Kelly.
  • Need a new tv, etc. Facebook marketplace
    1950 Admiral Television Entertainment Console
    $50$80
    Listed 19 hours ago in Atlanta, GA

    3bnb73btw48u.png
    "Sometimes you have to look to the past to understand where you are going in the future"
    Harry / Marietta GA
  • pitdogg2
    pitdogg2 Posts: 26,937
    How much for the cat? My dog broke his last one....
  • mhardy6647
    mhardy6647 Posts: 34,921
    edited October 2021
  • mhardy6647
    mhardy6647 Posts: 34,921
    edited October 2021
    That's a beautiful bipe! :)
    (that's ol' pilot-speak for biplane, in case any of y'all go to the Urban Dictionary and think otherwise!) B)

    There are a number of pretty darned nice "groups" on Flikr for folks who appreciate vintage aircraft -- talk about expensive hobbies. :)

    50923117536_5e160cb458_b.jpgBeech D-17S Staggerwing ‘G-BRVE’ by Alan Wilson, on Flickr

    (a truly gorgeous Beech "Staggerwing" -- one of the most beautiful general aviation aircraft ever build, I'd opine)
  • mhardy6647
    mhardy6647 Posts: 34,921
    edited October 2021
    Apropos of the above (and FWIW): I've always kind of wondered why the "back side" of the cone suspension attained the moniker spider?

    Now, I'll grant you that early "spiders" were, perhaps, more arachnoid in morphology -- such as the spiders on my venerable (and seldom unboxed) Altec 604B Duplexes (and on my single, rather scroungy, 603B "Dia-Cone").

    az3fmvg9hw9l.png

    1940s to early 1950s Altec (phenolic) spider from this interesting thread at the Lansingheritage forums:
    http://www.audioheritage.org/vbulletin/showthread.php?10725-G-L-Carrington-quite-a-guy
  • jdjohn
    jdjohn Posts: 3,322
    1j6yyzth2vxt.jpg
    "This may not matter to you, but it does to me for various reasons, many of them illogical or irrational, but the vinyl hobby is not really logical or rational..." - member on Vinyl Engine
    "Sometimes I do what I want to do. The rest of the time, I do what I have to." - Cicero, in Gladiator
    Regarding collectibles: "It's not who gets it. It's who gets stuck with it." - Jimmy Fallon
  • jdjohn
    jdjohn Posts: 3,322
    Hmmm...
    itcslokoil35.jpg
    "This may not matter to you, but it does to me for various reasons, many of them illogical or irrational, but the vinyl hobby is not really logical or rational..." - member on Vinyl Engine
    "Sometimes I do what I want to do. The rest of the time, I do what I have to." - Cicero, in Gladiator
    Regarding collectibles: "It's not who gets it. It's who gets stuck with it." - Jimmy Fallon
  • mhardy6647
    mhardy6647 Posts: 34,921
    edited October 2021
    jdjohn wrote: »
    Hmmm...
    itcslokoil35.jpg

    Yah, it's true! :)
    It counts minutes and seconds... "digital clocks" like this (and even cruder ones) are quite familiar to those of us who are... umm... of a certain age. Or an uncertain age, once we can't quite remember any more...

    k8inw5ys87sr.png
    gjphu2t5a24z.png
    8hx5t3uvt9zq.png


    That Wollensak/Sanyo 8-track deck's "digital" timer is bit on the "crude" side, but the little geared wheels on it are indeed calibrated with minutes and seconds. If (!?) it is driven by an AC synchronous motor, and the gears are pretty precisely cut, it should be good enough to ensure the track change ka-chunk doesn't fall right in the middle of an In-a-gadda-.... :#
  • pitdogg2
    pitdogg2 Posts: 26,937
    That one appears a "little" rough around the edges Ol'chap...
  • mhardy6647
    mhardy6647 Posts: 34,921
    edited October 2021
    8hx5t3uvt9zq.png
    OK -- I am in full-on reminisence mode after posting that image. That's the "digital" filmstrip clock used by Zenith in one of their "Circle of Sound" clock radios in the very early 1970s. I was the proud recipient of one (birthday present) ca. 1971 (i.e., almost exactly 50 years ago). It woke me up (to WBAL-AM 1090)
    for school for years, and I also used to listen to the Baltimore pop and rock (AM and FM) radio stations of the early 1970s on it before I set up a "hifi" ca. 1974 or 5 from components gleaned from my father. :)

    It actually sounded pretty good (for a plastic cabinet clock radio)! Zenith sold all kinds of cute loudspeaker configurations (large & small, cheap & expensive) over the years -- this particular "Circle of Sound" model has a downward firing "fullrange" (ahem) driver with a diffuser that serves as the radio's base. B)

    lgqntr73ly09.png
    Borrowed internet photo -- but I still have mine down in the basement. It is on its second clock, and I don't think the second one works any more, either... but it was a good ol' radio, and (probably) still is.

    EDIT: Oh, I forgot to mention -- the above-mentioned radio was acquired from Luskin's in Glen Burnie, MD. "Where Jack you know will save you dough!"

    ahh, memories...

    ;)

    Post edited by mhardy6647 on
  • mhardy6647
    mhardy6647 Posts: 34,921
    7djvdri1a5cv.png

    I remember that ad :)

    Probably still better than the cactus needles of the Victrola era, I suppose. :#

    nob1bfwwo1v5.png
    rcu94r6jdnh8.png

    I don't think they're good for too many plays before replacement's required. :|
  • SCompRacer
    SCompRacer Posts: 9,086
    jdjohn wrote: »
    1j6yyzth2vxt.jpg

    :D

    sa2iue8n5ahr.png
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • pitdogg2
    pitdogg2 Posts: 26,937
    mhardy6647 wrote: »
    7djvdri1a5cv.png

    I remember that ad :)

    Probably still better than the cactus needles of the Victrola era, I suppose. :#

    nob1bfwwo1v5.png
    rcu94r6jdnh8.png

    I don't think they're good for too many plays before replacement's required. :|

    I seen an old victrola or something like it that used wooden needles. Strangest thing I ever seen.