What did you do to your stereo rig today?
Comments
-
Put Dynamat Xtreme on my left speaker stand column. Then I was like....wow.....sounds terrrible..........completely flat.......the bass is sounding funny. Turned out the subwoofer must've blown an output transistor on power up or something LOLGeorge / NJ
Polk 7B main speakers, all std. mods (1979, orig owner)
Martin Logan Dynamo sub w/6ft 14awg Power Cord
Crown D150 amp
Logitech Squeezebox Touch Streamer w/EDO applet
iFi nano iDSD DAC
iPurifier3
iDefender w/ iPower PS
Custom Steve Wilson 1m UPOCC Interconnect
iFi Mercury 0.5m OFHC continuous cast copper USB cable
Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14awg, ultra low inductance
Custom Vibration Isolation Speaker Stands and Sub Platform -
I added a set of SDA-1C’s to my rotation. I picked them up from the original owner, in mint shape, all original..now to go down the rabbit hole of mods.
What speakers are your favs in that room? -
What speakers are your favs in that room? [/quote]
Unfortunately you can’t see them in that picture, but my Altec Lansing model 19’s have been with me for four decades. I purchased four of them back in 1977 from a brick and mortar store called Pacific Stereo. Also, there is a pair of Electro Voice Sentry 3’s, that are on the top of my list. -
I remember Pacific stereo stores, we had quite a few of them in the STL area.Source: Bluesound Node 2i - Preamp/DAC: Benchmark DAC2 DX - Amplifier: Parasound Halo A21 - Speakers: MartinLogan Motion 60XTi
-
I bought two custom acrylic dustcovers from eBay seller "jnbaudio" https://www.ebay.com/usr/jnbaudio?_trksid=p2057872.m2749.l2754 - one for an AR XA, and one for a Thorens TD-160. These are my personal pics.
I like the laser-embossed AR logo. The original/stock dustcovers for these are notoriously short, such that the tonearm pillar and counterweight rub on the underside of the acrylic (repeatedly), and of course leave a terrible blemish over time.
And now the Thorens. This dustcover has slots for the hinge arms in the rear, so practically OEM.
The acrylic used for these replacements is thicker than OEM, so definitely more hefty.
Both covers included four clear bumper pads, in case they are needed. They were expertly packed, and shipped promptly via FedEx. These were not exactly cheap, but worth it IMO in order to preserve these vintage decks
"This may not matter to you, but it does to me for various reasons, many of them illogical or irrational, but the vinyl hobby is not really logical or rational..." - member on Vinyl Engine
"Sometimes I do what I want to do. The rest of the time, I do what I have to." - Cicero, in Gladiator
Regarding collectibles: "It's not who gets it. It's who gets stuck with it." - Jimmy Fallon -
Very nice! I need to look into one for my Thorens. I hope I saved the hinge pins. I’ve been without the original cover for some time and just use a sacrificial lp to keep dust off the platter mat.
-
I've gone rather nuts lately. In the past 2 weeks I've upgraded my USB cable to a Curious (NUC to Matrix X-SPDIF 2), my HDMI/I2S cable to Wireworld Platinum Starlight (Matrix to Directstream), and 2 items I should get by tomorrow Morrow SP-5 speaker cables and a Synergistic Research Orange fuse for my preamp :^ /____________________________
2 channel - PS Audio Stellar S300 amp, PS Audio DirectStream DAC, audio optimized NUC7i5 running Windows 10 Pro/JRiver MC24/Fidelizer Plus 8.7, Matrix X-SPDIF 2 USB interface, Blackbird SSD dock with 500 GB Samsung 860 EVO, Tom Tutay modded EE Minimax preamp, Furman Elite 15 Pfi power conditioner, Martin Logan Electromotion ESL speakers, Rythmik F12SE subwoofer, Morrow Audio SP5 speaker cables, Gabriel Gold Reflection V2 IC's, VH Audio power cords, Revelation Audio Prophecy HDMI/I2S cable, iFi Gemini 3 USB cable.
Computer - Windows 7/JRiver, Topping D10 DAC, Fostex PMO.4n monitors -
Nice!
-
Old Pic: I like that amp stand on the left. In 2-3 years I’ll be in the market for several, inexpensive (2 each) 1, 2 & 3 tier stands. I confess being thrifty, most everything I’ve seen seems pricey and, because the correct word escapes me, glitzy.Figured that a proper evaluation of @GlennDog Cary Pre-Amp would take at least 5 years to complete!
Edited to say just kidding!
Samsung 60" UN60ES6100 LED
Outlaw Audio 976 Pre/Pro
Samsung BDP, Dish Rcvr, Xbox, Phillips CD chgr
Canare 14 ga - LCR tweeters inside*; CC outside
BJC 10 ga - LCR mids, inside* & out
8 ga Powerline - LR woofers, inside* & out
*soldered
LR: tri-amped RTi A7 w/Rotels. Woofers - 980BX; M&T - 981
CC: Rotel RB981 -> bi-amped CSi A6
5 Audio Pro Subs: LFE & CC - B1.39; all others - Evidence
Surrounds: Rotel 981 -> AR 12 ga -> RTi A3
Power Conditioning & Distribution:
3 dedicated 20A feeds; APC H15; 4 Furman Miniport 20s -
Does deep cleaning and maintenance count?
Disconnecting/reconnecting all HDMIs
Dusting/cleaning on and around components
Wiping down all power & signal connections
Verified LR placement - lateral, distance, & toe-in .Samsung 60" UN60ES6100 LED
Outlaw Audio 976 Pre/Pro
Samsung BDP, Dish Rcvr, Xbox, Phillips CD chgr
Canare 14 ga - LCR tweeters inside*; CC outside
BJC 10 ga - LCR mids, inside* & out
8 ga Powerline - LR woofers, inside* & out
*soldered
LR: tri-amped RTi A7 w/Rotels. Woofers - 980BX; M&T - 981
CC: Rotel RB981 -> bi-amped CSi A6
5 Audio Pro Subs: LFE & CC - B1.39; all others - Evidence
Surrounds: Rotel 981 -> AR 12 ga -> RTi A3
Power Conditioning & Distribution:
3 dedicated 20A feeds; APC H15; 4 Furman Miniport 20s -
Got the RTA-12Bs in the living room today. Going to get an AVR again in the next month or two and do a 5.1 vintage Polk setup in the living room and 2 channel in the bedroom. Yes, I'm giving a thumbs up.
afterburnt wrote: »They didn't speak a word of English, they were from South Carolina.
Village Idiot of Club Polk -
That’s an awesome gaming setup there bro!
Looks great.
-
Sweet setup J! Rock on!
-
Great setup.Yamaha RX-A2070, Music Hall A70.2 integrated amp, Benchmark Dac1, Bluesound NODE 2i, HSU VTF-2 MK5, LSiM705, LSiM704, Douglas Connection Alpha 12AWG OCC Speaker Cables, Douglas Connection Alpha Analog Interconnect Cables, Audioquest Interconnects and Digital Cables, Douglas Connection Alpha 11 OCC Custom Power Cable, Cullen Gold and Crossover Series Power Cables, Signal Power Cable, Furman PL-8C 15 Power Conditioner, Fluance RT85, Parasound Zphono USB Phono Preamp, Sony 65" 900F, Sony UBP-X700, Fios.
-
-
Installed the other Silnote Morpheus ref2 digital coax today. The AQ has been relegated to backup.
Basement: Polk SDA SRS, Cary SLP-05 Pre with ultimate upgrade,Enlightened Audio Designs CD Transport, Northstar Designs Excelsio DAC, Cambridge 851N streamer, Marantz SA-14 SACD, McIntosh MC300 Amp, Silnote Morpheus Ref2 Digital Cables, Furman 15PFi Power Conditioner, Pangea Power Cables, Wireworld Oasis 8 RCA IC's, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, PASS ACA Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
Spare Room: Antique Sound Labs Wave AV-8 Monoblocks, Tisbury Mini Passive Pre, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
Garage: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner -
I was given a Technics SL-1700 yesterday. Put it on the bench, cleaned and lubed.
Living room: Clearaudio Champion II turntable, EAR 834P phono pre, Auralic Altair DAC/server, PS Audio Quintessence power, DIY 6H30 Class A Linestage, ASL AQ1006 845 DT MKII mono block amplifers, DIY Altec/JBL speakers, DIY Baltic birch rack
Sun room: DIY Nelson Pass B1 w/Korg NuTube pre, Technics SL-1700 turntable, DIY Anaview d-class mono block amplfiers, JBL C50 Olympus speakers with custom Smith horns, Mapleshade Samson rack
Den: Onkyo TX-NR929 receiver, Oppo BDP-103 player, Behringer EP 4000 sub amp, Electrovoice DX-38 active, DIY EL-34 horn amp, Behringer NU6000 bass amp, Klipsch Jubilee speakers, Martin Logan Cinema center, JBL SAT2 surrounds, Danley DTS-10 sub
Dining room: Pro-Ject RPM 1 turntable, Shanling CD-T1500 SACD, Sumo Athena pre, SST Ampzilla 2000 amps, Quad 2905 speakers -
I have one of its cousins here...
DSC_6946 (2) by Mark Hardy, on Flickr
(I do have the original headshell elsewhere, in full disclosure) -
Swapping out all new speakers tomorrow. Dynaudio Audience 72se, 42 and 42c. Never owned Dynaudio. Excited!
-
I picked up a pair of 703’s and I’ve been burning them in.
Almost done with the diy stands.
__________________________________________________
2 Channel
Turntable - VPI Scout 1.1/Ortofon 2M Blue
Amplification - Parks Audio Budgie, Dared SL2000a, McCormack DNA 0.5 Deluxe
Speakers - GoldenEar Triton 2
__________________________________________________
7.1 Home Theater
Denon AVR-X3300W; Rotel RMB-1066; Polk CS350ls, LS90's, FXi3's, RC60i; SVS PC Ultra; BenQ HT2050; Elite Screens 120"
__________________________________________________
Man Cave
Turntable - Pro-Ject 2.9 Wood/Grado Gold
Integrated Amplifier - Rogue Audio Cronus Magnum II
CD: Cambridge Audio
Speakers - LSiM 703; SDA 2A; Epos Epic 2
__________________________________________________ -
What's all the writing in the frames?afterburnt wrote: »They didn't speak a word of English, they were from South Carolina.
Village Idiot of Club Polk -
Set lists. A midwest band that I fell in love with. I saw them a number of times and they were so gracious with autographs each time. I got the show poster and a set list each time.What's all the writing in the frames?
__________________________________________________
2 Channel
Turntable - VPI Scout 1.1/Ortofon 2M Blue
Amplification - Parks Audio Budgie, Dared SL2000a, McCormack DNA 0.5 Deluxe
Speakers - GoldenEar Triton 2
__________________________________________________
7.1 Home Theater
Denon AVR-X3300W; Rotel RMB-1066; Polk CS350ls, LS90's, FXi3's, RC60i; SVS PC Ultra; BenQ HT2050; Elite Screens 120"
__________________________________________________
Man Cave
Turntable - Pro-Ject 2.9 Wood/Grado Gold
Integrated Amplifier - Rogue Audio Cronus Magnum II
CD: Cambridge Audio
Speakers - LSiM 703; SDA 2A; Epos Epic 2
__________________________________________________ -
Swapping out all new speakers tomorrow. Dynaudio Audience 72se, 42 and 42c. Never owned Dynaudio. Excited!
That’s a nice set! Dyn’s love high current amplification; what you driving’em with? -
Set up a second very modest 2 channel rig in the back of my living room.
Amazon Echo dot > NAD 7175 > RT16
My wife will listen to music, but does not like to mess with my main stereo. She claims to not be able to turn it on? I though this might be something she would use because it is much more simple. Literally one button, "on" for the 7175, and she is in business. She was not impressed with more equipment in the living room. I will leave it up for a week or two, who knows maybe she will use it.
I purchased the NAD the other day for not a lot. So far I like the sound, and It certainly can push a set of speakers.
The RT16s were purchased months ago with a lot of 10 or 12 speakers for $100. I sold 6 of them as a 5.1 set up for $125 and gave the rest away. I only wanted the RT16 which I essentially got for free.
I think they could be improved a bit by replacing the interior sound dampening which seemed to be disintegrating and pouring out of the downward facing "power ports". I pulled one driver and vacuumed the remnants out to cut down on the mess, but that stuff should be replaced.
As a result of setting this up I listened to the radio at home for the first time in who knows how long. Decades for sure....
SDA-2B: TL mod, gimpod boards, sonicap, mills, Erse inductor matched by westmassguy, Cabs sealed, h-nuts, dynamat, BH5
Technics sl-1710/sony ubp-800>Marantz NR-1509>parasound HCA-1500a
SDA SRS 2.3tl: gimpod boards, sonicap, mills, Erse inductor matched by westmassguy, Cabs sealed, h-nuts, dynamat, BH5
Marantz 8006/Technics SL-QD33>Anthem Pre-1L>Crown XLS-2002
SDA-1C: gimpod boards, sonicap, mills, Cabs sealed, h-nuts, dynamat, BH5
Zu Audio Omen Dirty Weekend (Jupiter caps)
Technics sl-1710/sony ubp-800>Marantz NR-1509>Adcom HCA-535 -
A B&K Av5000ii. 185 wpc @ 4 ohms. Hope to be ok. -
Yes, that will do quite well
Congrats on the new speakers!Audio: Von Schweikert VR-2 * Musical Fidelity M2si * Bluesound Node 2i * APC H10
Vinyl: Fluance RT82 * Bottlehead Reduction + Integration Upgrade * KAB RF1
Video: VIZIO M55Q8-H1 * Panasonic DMP-UB200 * ROKU SS+ * Z-line Designs Elektra -
I picked up a pair of 703’s and I’ve been burning them in.
Almost done with the diy stands.
Same here. Done with burn in/break in. I got a new set of stands as well. New Triangle Borea BR03 speakers scheduled to arrive today - we will see who gets to stay!Audio: Von Schweikert VR-2 * Musical Fidelity M2si * Bluesound Node 2i * APC H10
Vinyl: Fluance RT82 * Bottlehead Reduction + Integration Upgrade * KAB RF1
Video: VIZIO M55Q8-H1 * Panasonic DMP-UB200 * ROKU SS+ * Z-line Designs Elektra -
Yes, that will do quite well
Congrats on the new speakers!
Thanks! Just got em hooked up and playing around. Like what Im hearing! -
Cool mounts on the back to store the grills.
-
Looks good!
