Adorama blow out prices on LSiM series

124678

Comments

  • mrloren
    mrloren Posts: 2,454
    edited September 2019
    Light isn’t a big deal, but electrical tape or window tint stickers would fix it if it bugs you.

    yup

    now that digital display with all the numbers... talk about a major distraction
    When I was a kid my parents told me to turn it down. Now I'm an adult and my kids tell me to turn it down.
    Family Room:LG QNED80 75", Onkyo RZ50 Emotiva XPA3 GEN3 Oppo BDP-93,Sony UBP-X800BM. Main: Polk LsiM 705Center: Polk LSiM 704CFront High/Rear High In-Ceiling Polk 80F/X RT Surrounds: Polk S15 Sub: HSU VTF3-MK5
    Bed Room; Marantz SR5010, BDP-S270Main: Polk Signature S20Center: Polk Signature S35Rear: Polk R15 Sub: SVS SB2000
    Working Warehouse; Yamaha A-S301, Sony DVP-NS3100ES for disc Plok TSX550T SVS PB2000 Mini tower PC with 400GB of music
  • mrloren wrote: »
    Light isn’t a big deal, but electrical tape or window tint stickers would fix it if it bugs you.

    yup

    now that digital display with all the numbers... talk about a major distraction

    But that can be dimmed & turned off.

    Some of these products their lights are just very bright. My cable box has settings

    ( 1-2-3) but not off. Go figure. Thanks @mrloren
    Denon AVR X4200W
    Parasound A23 amplifier
    Parasound A23 amplifier
    LG 65" Ultra HD4k
    LG 4kBR - UP970
    Denon DVM 4800
    Denon DP 3000 turntable
    Saec 308sx tonearm w/
    Dynavector 10x5 cart
    Vincent PHO 701 Phono Preamp
    MIT Avt3 Speaker c's
    Audio Quest Big Sur ic's
    Polk SDA 1C's modded
    Polk LSim 707
    Polk LSiM706c
    Polk RTiA 3's
    Polk 80F/X-RT
    Polk DSW PRO 440wi sub
    Infinity bu2 sub
    "The early Klingon gets the Gagh"
  • mak99
    mak99 Posts: 362
    If anyone has access to their 707s, could you measure the centerline distance between the spikes, both front and back? I took some pictures but the camera flash made the tape measure unreadable...

    I have the plinth width at ~9.5" front, ~11" rear. The picture below is when I installed them on the A7s back in 2010.

    Thanks in advance!

    soc0onaytorp.jpg




    Main HT:JVC DLA-RS45135" Elite Screens fixed frame, 1.1 gainMarantz SR7007 (operating as pre-pro)Emotiva XPA-1 x3 (L+C+R), UPA-7 (surrounds)Oppo BDP-103D/BDP-83Toshiba HD-XA2Panamax M5410 Pro x3Polk LSiM707s, LSiC706, 80 F/X-LS, 65-RTSeaton Sound/MCCA MFW "Turbo" + custom Dayton SA1000 sub amp (orig. AV123 MFW-15)Velodyne SMS-1I/Cs: MP 12ga/4-cond (fronts); MP 12ga (surrounds), MP HDMI (all sources), some BJC sprinkled thruoutHarmony EliteSalamander Triple 40 C/B* still need to sell older but mint gear!!
  • mak99 wrote: »
    If anyone has access to their 707s, could you measure the centerline distance between the spikes, both front and back? I took some pictures but the camera flash made the tape measure unreadable...

    I have the plinth width at ~9.5" front, ~11" rear. The picture below is when I installed them on the A7s back in 2010.

    Thanks in advance!

    soc0onaytorp.jpg


    What are those for? (forgive me if thats a stupid question).

    I have 707s, i can try tomorrow.
  • tonyb
    tonyb Posts: 32,902
    bostonvr6 wrote: »
    mak99 wrote: »
    If anyone has access to their 707s, could you measure the centerline distance between the spikes, both front and back? I took some pictures but the camera flash made the tape measure unreadable...

    I have the plinth width at ~9.5" front, ~11" rear. The picture below is when I installed them on the A7s back in 2010.

    Thanks in advance!

    soc0onaytorp.jpg


    What are those for? (forgive me if thats a stupid question).

    I have 707s, i can try tomorrow.

    Stabalizers...to keep them from tipping over. Also useful for uneven flooring, kids, pets....things that go bump in the night.
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's
  • mak99
    mak99 Posts: 362
    bostonvr6 wrote: »
    What are those for? (forgive me if thats a stupid question).

    I have 707s, i can try tomorrow.

    Not a stupid question! Those are the outrigger bars being mounted to the inserts on the bottom of the speaker. The adjustment knobs on the ends hadn't been installed quite yet.
    tonyb wrote: »
    Stabalizers...to keep them from tipping over. Also useful for uneven flooring, kids, pets....things that go bump in the night.

    Exactly! And with the super-thick rugs that my media room has, I don't want to take any chances on these being knocked over. Plus I'm in earthquake country, which is all the more reason...

    boston, the pictures below are the finished outriggers on the A7s...


    7gdxbx5djcb4.jpg
    ^^ close-up

    wli1s12euvwu.jpg
    ^^ full shot

    ojp4liql8qcz.jpg
    ^^ old system, old house
    Main HT:JVC DLA-RS45135" Elite Screens fixed frame, 1.1 gainMarantz SR7007 (operating as pre-pro)Emotiva XPA-1 x3 (L+C+R), UPA-7 (surrounds)Oppo BDP-103D/BDP-83Toshiba HD-XA2Panamax M5410 Pro x3Polk LSiM707s, LSiC706, 80 F/X-LS, 65-RTSeaton Sound/MCCA MFW "Turbo" + custom Dayton SA1000 sub amp (orig. AV123 MFW-15)Velodyne SMS-1I/Cs: MP 12ga/4-cond (fronts); MP 12ga (surrounds), MP HDMI (all sources), some BJC sprinkled thruoutHarmony EliteSalamander Triple 40 C/B* still need to sell older but mint gear!!
  • Good point. Those feet are garbage. Cheapest part of the speaker.
    Up
    LSi15 LSiC - RX-V3000

    Down
    LSiM707 - 706c - 702f/x - Dual HSU VTF-15H Mk2
    Parasound HCA-3500 - HCA-2003A - Marantz SR7005
    Sim2 D60 - Dragonfly 106" Panny 500

  • mak99
    mak99 Posts: 362
    I didn't think to remove the plastic feet entirely - I just used the screwholes where the factory spikes were installed. I agree that the feet were the weak link for an otherwise good-looking design...

    For 707 owners, I just measured the plinth/spikes:
    Front - plinth width ~10", spikes ~7" centers
    Rear - plinth width ~11", spikes ~8.5" centers

    Soundocity outriggers size SBN9 or larger. I have SBN7/SBN9 on the RTiA7s, so ordered SBN11s and SBN13s (2 sets each) to give me plenty of choices for the 707s.

    Pics below show current install on thick rug:

    277vbpahxl19.jpg

    yywxhau0ia38.jpg
    Main HT:JVC DLA-RS45135" Elite Screens fixed frame, 1.1 gainMarantz SR7007 (operating as pre-pro)Emotiva XPA-1 x3 (L+C+R), UPA-7 (surrounds)Oppo BDP-103D/BDP-83Toshiba HD-XA2Panamax M5410 Pro x3Polk LSiM707s, LSiC706, 80 F/X-LS, 65-RTSeaton Sound/MCCA MFW "Turbo" + custom Dayton SA1000 sub amp (orig. AV123 MFW-15)Velodyne SMS-1I/Cs: MP 12ga/4-cond (fronts); MP 12ga (surrounds), MP HDMI (all sources), some BJC sprinkled thruoutHarmony EliteSalamander Triple 40 C/B* still need to sell older but mint gear!!
  • Inspector 24
    Inspector 24 Posts: 1,308
    edited September 2019
    Thick indeed. Did those spikes get to the floor boards?
    Up
    LSi15 LSiC - RX-V3000

    Down
    LSiM707 - 706c - 702f/x - Dual HSU VTF-15H Mk2
    Parasound HCA-3500 - HCA-2003A - Marantz SR7005
    Sim2 D60 - Dragonfly 106" Panny 500

  • mak99
    mak99 Posts: 362
    Thick indeed. Did those spikes get to the floor boards?

    Yes they did - the A7s feel quite solid. So I'm expecting the same when installed on the 707s, especially with ordering the two wider sizes earlier today.
    Main HT:JVC DLA-RS45135" Elite Screens fixed frame, 1.1 gainMarantz SR7007 (operating as pre-pro)Emotiva XPA-1 x3 (L+C+R), UPA-7 (surrounds)Oppo BDP-103D/BDP-83Toshiba HD-XA2Panamax M5410 Pro x3Polk LSiM707s, LSiC706, 80 F/X-LS, 65-RTSeaton Sound/MCCA MFW "Turbo" + custom Dayton SA1000 sub amp (orig. AV123 MFW-15)Velodyne SMS-1I/Cs: MP 12ga/4-cond (fronts); MP 12ga (surrounds), MP HDMI (all sources), some BJC sprinkled thruoutHarmony EliteSalamander Triple 40 C/B* still need to sell older but mint gear!!
  • Manticore
    Manticore Posts: 408
    edited September 2019
    Adorama is at it again!!!!!!!!!!!!!!!

    The LSiM's are at the low prices again Sunday 1:48PM

    Use the links from page one of this thread posted by @CottageChz
    Denon AVR X4200W
    Parasound A23 amplifier
    Parasound A23 amplifier
    LG 65" Ultra HD4k
    LG 4kBR - UP970
    Denon DVM 4800
    Denon DP 3000 turntable
    Saec 308sx tonearm w/
    Dynavector 10x5 cart
    Vincent PHO 701 Phono Preamp
    MIT Avt3 Speaker c's
    Audio Quest Big Sur ic's
    Polk SDA 1C's modded
    Polk LSim 707
    Polk LSiM706c
    Polk RTiA 3's
    Polk 80F/X-RT
    Polk DSW PRO 440wi sub
    Infinity bu2 sub
    "The early Klingon gets the Gagh"
  • msg
    msg Posts: 9,306
    edited September 2019
    Couldn't figure out how to get Midnight Mahogany.
    Guess you could call in, but figured out the link.
    Here it is for anyone looking:
    https://www.adorama.com/pklsim707b.html?EmailPrice=T
    I disabled signatures.
  • WLDock
    WLDock Posts: 3,073
  • Was just about to post that the deal is back again!
  • so odd that the 705 costs MORE than the 707 now.
  • mhardy6647
    mhardy6647 Posts: 32,922
    edited September 2019
    bostonvr6 wrote: »
    so odd that the 705 costs MORE than the 707 now.

    It's that fuzzy math that an erstwhile US leader warned us about, methinks.

    ;)

    I mean, I am guessin' it means they're trying harder (and/or have to try harder) to get rid of 707s than 705s. Either that, or they have a stockpile of more dinged up 707s than they do of 705s.

    Purely speculatin' here.


  • mhardy6647 wrote: »
    bostonvr6 wrote: »
    so odd that the 705 costs MORE than the 707 now.

    It's that fuzzy math that an erstwhile US leader warned us about, methinks.

    ;)

    I mean, I am guessin' it means they're trying harder (and/or have to try harder) to get rid of 707s than 705s. Either that, or they have a stockpile of more dinged up 707s than they do of 705s.

    Purely speculatin' here.


    Yea must be the level of stock they have.

    I bought the 707's earlier this month, these prices are unbelievable. And they came perfect, no dings/dents so they are definitely new stock. must have a pile of them.
  • mhardy6647
    mhardy6647 Posts: 32,922
    The ones that @manticore has (also from one of their recent, big discount sales, IIRC) certainly look perfect to me.

    hidbxtzz80oc.png
  • mak99
    mak99 Posts: 362
    In case anyone was interested, the outriggers arrived today and a quick check seems to show that the SBN13s will fit on the rear but not the front. Pictures below show the bars lying next to the plinth as I don't have time to install tonight...

    c94g3dhc7dec.jpg
    ^^ SBN11

    4wy7ezxjouq2.jpg
    ^^ SBN13


    Main HT:JVC DLA-RS45135" Elite Screens fixed frame, 1.1 gainMarantz SR7007 (operating as pre-pro)Emotiva XPA-1 x3 (L+C+R), UPA-7 (surrounds)Oppo BDP-103D/BDP-83Toshiba HD-XA2Panamax M5410 Pro x3Polk LSiM707s, LSiC706, 80 F/X-LS, 65-RTSeaton Sound/MCCA MFW "Turbo" + custom Dayton SA1000 sub amp (orig. AV123 MFW-15)Velodyne SMS-1I/Cs: MP 12ga/4-cond (fronts); MP 12ga (surrounds), MP HDMI (all sources), some BJC sprinkled thruoutHarmony EliteSalamander Triple 40 C/B* still need to sell older but mint gear!!
  • msg
    msg Posts: 9,306
    Those both look like they'd fit to me, going by the photos. Did they?
    I disabled signatures.
  • Geoff4rfc
    Geoff4rfc Posts: 2,116
    msg wrote: »
    Those both look like they'd fit to me, going by the photos. Did they?

    Scott!!!!! Get over here and lets do some track days together!!! Okay, we'll wait till next spring :)
    Source: BRP Panasonic UB9000, CDP Emotiva ERC3 - Display: LG OLED EVO 83 C3 - Pre/Pro: Marantz 8802A - Amplification: Emotiva XPA-DR3, XPA-2 x 2, XPA-6, Speakers, Mains/2ch-Focal Kanta No2's, C-LSiM706, S-702F/X, RS-RTiA9's, WS-RTiA9's, FH-RTiA3's, Subs - Epik Empire x 2

    Cables: AudioQuest McKenzie XLR's/CDP/Amp, Carbon 48/BRP, Forest 48/Display

    EXPERIENCE: next to nothing, but I sure enjoy audio and video MY OPINION OF THIS HOBBY: I may not be a smart man, but I know what quicksand is.
    When I was young, I was Superman but now that old age has gotten the best of me I'm only Batman
  • msg
    msg Posts: 9,306
    On it! Wait, you mean on a real bike this time, right? Not that sidecar with your mother inlaw again?
    I disabled signatures.
  • Geoff4rfc
    Geoff4rfc Posts: 2,116
    Nice Scott, it's been a long time since I've spit coffee on my monitor!!!!!
    Source: BRP Panasonic UB9000, CDP Emotiva ERC3 - Display: LG OLED EVO 83 C3 - Pre/Pro: Marantz 8802A - Amplification: Emotiva XPA-DR3, XPA-2 x 2, XPA-6, Speakers, Mains/2ch-Focal Kanta No2's, C-LSiM706, S-702F/X, RS-RTiA9's, WS-RTiA9's, FH-RTiA3's, Subs - Epik Empire x 2

    Cables: AudioQuest McKenzie XLR's/CDP/Amp, Carbon 48/BRP, Forest 48/Display

    EXPERIENCE: next to nothing, but I sure enjoy audio and video MY OPINION OF THIS HOBBY: I may not be a smart man, but I know what quicksand is.
    When I was young, I was Superman but now that old age has gotten the best of me I'm only Batman
  • Viking64
    Viking64 Posts: 6,646
    edited October 2019
    If you have two spare conductors in that flex tubing, you should double-up the "+" and "-" runs. The wire seems like a relatively small gauge compared to your jumpers and that adjustment could make a noticeable improvement.
  • Geoff4rfc
    Geoff4rfc Posts: 2,116
    @mak99 absolutely stunning from top to bottom......great front stage!
    Source: BRP Panasonic UB9000, CDP Emotiva ERC3 - Display: LG OLED EVO 83 C3 - Pre/Pro: Marantz 8802A - Amplification: Emotiva XPA-DR3, XPA-2 x 2, XPA-6, Speakers, Mains/2ch-Focal Kanta No2's, C-LSiM706, S-702F/X, RS-RTiA9's, WS-RTiA9's, FH-RTiA3's, Subs - Epik Empire x 2

    Cables: AudioQuest McKenzie XLR's/CDP/Amp, Carbon 48/BRP, Forest 48/Display

    EXPERIENCE: next to nothing, but I sure enjoy audio and video MY OPINION OF THIS HOBBY: I may not be a smart man, but I know what quicksand is.
    When I was young, I was Superman but now that old age has gotten the best of me I'm only Batman
  • EndersShadow
    EndersShadow Posts: 17,517
    mak99 wrote: »
    sh4o7gvv49sr.jpg
    ^^ finally done!

    Looks great. Likely just not seeing this right, but is your center not angled at all? If its not I'd suggest doing that. If it is then my apologies.
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • mak99
    mak99 Posts: 362
    edited October 2019
    Viking64 wrote: »
    If you have two spare conductors in that flex tubing, you should double-up the "+" and "-" runs. The wire seems like a relatively small gauge compared to your jumpers and that adjustment could make a noticeable improvement.

    Good observation - I ran three sets of those wires (Monoprice 12ga, 4-conductor cable) for the L+C+R about five years ago when I transformed the room. The center is biwired from the dedicated Emo XPA-100 amp but I never decided whether to biwire the L+R speakers also, or double-up on the conductors for an equivalent 9ga wire. So they are currently wired as you noticed. Maybe that'll be my next evening project...
    Post edited by mak99 on
    Main HT:JVC DLA-RS45135" Elite Screens fixed frame, 1.1 gainMarantz SR7007 (operating as pre-pro)Emotiva XPA-1 x3 (L+C+R), UPA-7 (surrounds)Oppo BDP-103D/BDP-83Toshiba HD-XA2Panamax M5410 Pro x3Polk LSiM707s, LSiC706, 80 F/X-LS, 65-RTSeaton Sound/MCCA MFW "Turbo" + custom Dayton SA1000 sub amp (orig. AV123 MFW-15)Velodyne SMS-1I/Cs: MP 12ga/4-cond (fronts); MP 12ga (surrounds), MP HDMI (all sources), some BJC sprinkled thruoutHarmony EliteSalamander Triple 40 C/B* still need to sell older but mint gear!!
  • mak99
    mak99 Posts: 362
    Geoff4rfc wrote: »
    @mak99 absolutely stunning from top to bottom......great front stage!
    Looks great. Likely just not seeing this right, but is your center not angled at all? If its not I'd suggest doing that. If it is then my apologies.

    Thanks for the compliments - and nothing to apologize for, Enders! The picture was a bit dark so it was hard to see. The center is angled up on Auralex pads (link), on top of the Salamander amp stand...

    Geoff: side note - I'm not sure if you were the Geoff that I met back in May 2012 at a local Seattle-area GTG (see this thread). If so, small world! If not, maybe another local GTG could be planned since the weather outside is turning to crap... :/

    fkf2z8pocxdw.jpg

    bgq5qdrmwf7h.jpg

    Main HT:JVC DLA-RS45135" Elite Screens fixed frame, 1.1 gainMarantz SR7007 (operating as pre-pro)Emotiva XPA-1 x3 (L+C+R), UPA-7 (surrounds)Oppo BDP-103D/BDP-83Toshiba HD-XA2Panamax M5410 Pro x3Polk LSiM707s, LSiC706, 80 F/X-LS, 65-RTSeaton Sound/MCCA MFW "Turbo" + custom Dayton SA1000 sub amp (orig. AV123 MFW-15)Velodyne SMS-1I/Cs: MP 12ga/4-cond (fronts); MP 12ga (surrounds), MP HDMI (all sources), some BJC sprinkled thruoutHarmony EliteSalamander Triple 40 C/B* still need to sell older but mint gear!!
  • Geoff4rfc
    Geoff4rfc Posts: 2,116
    edited October 2019
    mak99 wrote: »
    Geoff: side note - I'm not sure if you were the Geoff that I met back in May 2012 at a local Seattle-area GTG (see this thread). If so, small world! If not, maybe another local GTG could be planned since the weather outside is turning to crap... :/

    fkf2z8pocxdw.jpg

    bgq5qdrmwf7h.jpg

    Nah, wasn't me, I saw that I was interested though....never made it...had to have been a good time!!

    You're welcome to come by here and check out the sounds and sights at Casa de Geoff :)

    I've had @ken brydson over and trying to get him over again....maybe the two of you could make it over one of these weekends!!
    Source: BRP Panasonic UB9000, CDP Emotiva ERC3 - Display: LG OLED EVO 83 C3 - Pre/Pro: Marantz 8802A - Amplification: Emotiva XPA-DR3, XPA-2 x 2, XPA-6, Speakers, Mains/2ch-Focal Kanta No2's, C-LSiM706, S-702F/X, RS-RTiA9's, WS-RTiA9's, FH-RTiA3's, Subs - Epik Empire x 2

    Cables: AudioQuest McKenzie XLR's/CDP/Amp, Carbon 48/BRP, Forest 48/Display

    EXPERIENCE: next to nothing, but I sure enjoy audio and video MY OPINION OF THIS HOBBY: I may not be a smart man, but I know what quicksand is.
    When I was young, I was Superman but now that old age has gotten the best of me I'm only Batman