Group-buy-2019-dreadnought-avel-lindberg-1000va-isolation-transformers

Options
1…1011121416

Comments

  • lightman1
    lightman1 Posts: 10,803
    Options
    Big iron was just dropped off at the warehouse. Sweet! I'm lazy. Who has a wiring schematic?
  • Unknown
    Options
    This content has been removed.
  • lightman1
    lightman1 Posts: 10,803
    Options
    Good times! :D
  • Unknown
    Options
    This content has been removed.
  • Gerres26
    Gerres26 Posts: 874
    Options
    Its here! Its here!
    4aawxm2t5zsj.jpg
  • Manticore
    Manticore Posts: 408
    Options
    Well after a few hours of listening i am sold on this purchase of the Dreadnought. For me i have noticed more depth, width and an increase of my bass & mid bass. The sound is really improved for the better.

    I was going to go with a cut up MIT cable but, decided to use what i was originally using for an SDA cable. A Supra quad something or another. I wound up adding a jumper like i did when upgrading my 1C's so i am using all four connectors on the Neutric connector. An easy peasy job hooking up when using @DarqueKnight instructions. diqq5nc4u2uw.jpg
    n6kskhnd549c.jpg
    thbrlfxvea9o.jpg

    Also, Larry this box is da bomb. This just adds to the total package with great looks & build. Quality through & through. Thank You Larry!!!!!!!!!!!!!!


    Denon AVR X4200W
    Parasound A23 amplifier
    Parasound A23 amplifier
    LG 65" Ultra HD4k
    LG 4kBR - UP970
    Denon DVM 4800
    Denon DP 3000 turntable
    Saec 308sx tonearm w/
    Dynavector 10x5 cart
    Vincent PHO 701 Phono Preamp
    MIT Avt3 Speaker c's
    Audio Quest Big Sur ic's
    Polk SDA 1C's modded
    Polk LSim 707
    Polk LSiM706c
    Polk RTiA 3's
    Polk 80F/X-RT
    Polk DSW PRO 440wi sub
    Infinity bu2 sub
    "The early Klingon gets the Gagh"
  • gmcman
    gmcman Posts: 1,887
    Options
    Mine arrived today as well.....thanks again.
  • indyhawg
    indyhawg Posts: 1,683
    Options
    Mine arrived today also.
  • JayCee
    JayCee Posts: 1,509
    Options
    @vcwatkins Just unboxed mine. Craig, thank you for your efforts!
    ➀Speakers: Polk1.2tl's (Uber Mods) ➁Pre/Amp/DAC: PS Audio PMG Signature Pre, BHK Signature 250, PMG Signature 512 ➂Cables/IC's: MIT S1Bi-Wire/S3.3 Balanced +Avel Lindberg 1000VA "Dreadnought" ➃Power Conditioner: PS Audio P15 Power Plant ➄Power Cords: Core Power Technologies Gold, DH Labs Power Plus DIY w/Neotech NC-P301 & P311ends ➅Streaming: Roon ROCK on wifi'd NUC, TP-Link WAP, & Uptone EtherREGEN, AfterDark, Emperor Double Crown Clock, Black Modernize LPS⟿Ω☯☥☮⟿🔊♩♪♫♬♩♪♫♬♩♪♫♬
  • audioluvr
    audioluvr Posts: 6,079
    Options
    Putting it together! Sweet!aed1m2mg1tt3.jpeg
    Gustard X26 Pro DAC
    Belles 21A Pre Upgraded with Mundorf Supremes
    B&K M200 Sonata monoblocks refreshed and upgraded
    Polk SDA 1C's modded / 1000Va Dreadnaught
    Wireworld Silver Eclipse IC's and speaker cables
    Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)


    There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus
  • Unknown
    Options
    This content has been removed.
  • audioluvr
    audioluvr Posts: 6,079
    edited June 2019
    Options
    Opted to secure everything with aluminum rivets to minimize RF escaping and to give it that little extra industrial bling look. I also used a carriage bolt and bake potatoed the head.

    8pszn1wiurfg.jpeg
    Gustard X26 Pro DAC
    Belles 21A Pre Upgraded with Mundorf Supremes
    B&K M200 Sonata monoblocks refreshed and upgraded
    Polk SDA 1C's modded / 1000Va Dreadnaught
    Wireworld Silver Eclipse IC's and speaker cables
    Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)


    There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus
  • audioluvr
    audioluvr Posts: 6,079
    Options
    lightman1 wrote: »
    Big iron was just dropped off at the warehouse. Sweet! I'm lazy. Who has a wiring schematic?

    Right Pin = Red/Yellow

    Right Blade (Negative Speaker Terminal) = Black/Orange

    Left Pin = Grey/Brown

    Left Blade (Negative Speaker Terminal) = Blue/Violet
    Gustard X26 Pro DAC
    Belles 21A Pre Upgraded with Mundorf Supremes
    B&K M200 Sonata monoblocks refreshed and upgraded
    Polk SDA 1C's modded / 1000Va Dreadnaught
    Wireworld Silver Eclipse IC's and speaker cables
    Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)


    There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus
  • Unknown
    edited June 2019
    Options
    This content has been removed.
  • audioluvr
    audioluvr Posts: 6,079
    Options
    No. Grade 5 steel. That's why I bake potatoed it
    Gustard X26 Pro DAC
    Belles 21A Pre Upgraded with Mundorf Supremes
    B&K M200 Sonata monoblocks refreshed and upgraded
    Polk SDA 1C's modded / 1000Va Dreadnaught
    Wireworld Silver Eclipse IC's and speaker cables
    Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)


    There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus
  • nspindel
    nspindel Posts: 5,343
    Options
    Manticore wrote: »
    Well after a few hours of listening i am sold on this purchase of the Dreadnought. For me i have noticed more depth, width and an increase of my bass & mid bass. The sound is really improved for the better.

    I was going to go with a cut up MIT cable but, decided to use what i was originally using for an SDA cable. A Supra quad something or another. I wound up adding a jumper like i did when upgrading my 1C's so i am using all four connectors on the Neutric connector. An easy peasy job hooking up when using @DarqueKnight instructions. diqq5nc4u2uw.jpg
    n6kskhnd549c.jpg
    thbrlfxvea9o.jpg

    Also, Larry this box is da bomb. This just adds to the total package with great looks & build. Quality through & through. Thank You Larry!!!!!!!!!!!!!!


    Nice to see! I clearly remember being floored by how obvious the improvement was when I first set up the 800VA Dread, and then being equally impressed when I upgraded to the 1000VA. And yes, Larry's box totally completes it! Happy listening!
    Good music, a good source, and good power can make SDA's sing. Tubes make them dance.
  • motorstereo
    motorstereo Posts: 2,428
    Options
    It's nice to see DK's and Larry's research and work paying off so well for so many sda owners.
  • Unknown
    edited June 2019
    Options
    This content has been removed.
  • GospelTruth
    GospelTruth Posts: 403
    Options
    Got mine in the mail yesterday. Like others have said, this thing is heavy! I have a project now, but it will be a few weeks before I get to it as we have a lot of family vacation time over the next few weeks.

    Thanks all for this! This is going to be sweet once it is complete.
    Speakers
    Energy RC-70 Mains, Energy RC-LRC Center, Energy RC-R (x4) Rear Channels, Energy RC-R (x2) Front Effects
    Polk 5jr+
    Polk SDA 2B
    Polk SDS 3.1TL

    Equipment
    Panamax 5510 Re-generator Power Conditioner
    Yamaha RX-V3800 Receiver
    Digital Sources: Sony CDP-X339ES CD Player, HHB CDR830 BurnIt Professional CD Recorder, Sony PS3, Oppo DV-983H DVD Player
    Analog Sources: Sony TC-K890ES Cassette, Nakamichi DR-1 Cassette, Technics SL-7 Turntable
  • F1nut
    F1nut Posts: 52,406
    Options
    audioluvr wrote: »
    No. Grade 5 steel. That's why I bake potatoed it

    Seems like flawed logic to me.
  • gudnoyez
    gudnoyez Posts: 8,219
    Options
    4ikl9abv3gg8.jpg

    Mine showed up today I'm glad my mailbox was big enough for it to fit in. I thought I had everything dont have a bolt what length and type am I needing? Glad we got enough guys together for these.
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
  • RobbyKY
    RobbyKY Posts: 117
    Options
    Mine arrived today. Guess it takes a little longer to haul this chunk of copper all the way down to Texas. Wife called me at work and said we had a package she couldn't pick up, knew immediately what it was. Weekend project!!f5igujo36mm0.jpg
    Media Room: Parasound JC-5, Cambridge 851N, Schiit Freya, SDA SRS 1.2tl
    Game Room: Carver M4.0t, Carver C-4000, Oppo BDP-105, SDA SRS 1.2tl
    Bar/Card Room: Carver TFM-55, Carver C-1(BillD), Oppo BDP-93, SDA SRS 3.1
    Son's Room: Carver TFM-55, Carver C-1(BillD), Laptop/AQ Dragonfly, SDA SRS 3.1
    Bedroom: McIntosh MC150, Cambridge CXN, SDA 2Btl
    Outdoor Pool Area: Yamaha R-N803 with four Polk Atrium 6
    HT: Polk RTi A9s, CSi-A6, RT-65, RTi-A3's, Marantz SR5012, XPA3, UDP-203, Epson 5040UB


  • audioluvr
    audioluvr Posts: 6,079
    Options
    F1nut wrote: »
    audioluvr wrote: »
    No. Grade 5 steel. That's why I bake potatoed it

    Seems like flawed logic to me.

    Nuh uh!
    Gustard X26 Pro DAC
    Belles 21A Pre Upgraded with Mundorf Supremes
    B&K M200 Sonata monoblocks refreshed and upgraded
    Polk SDA 1C's modded / 1000Va Dreadnaught
    Wireworld Silver Eclipse IC's and speaker cables
    Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)


    There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus
  • VR3
    VR3 Posts: 29,752
    Options
    These things are big and heavy, kind of like lugging around a cinder block (or two)

    89vi70wit8n3.jpg
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • F1nut
    F1nut Posts: 52,406
    edited June 2019
    Options
    audioluvr wrote: »
    F1nut wrote: »
    audioluvr wrote: »
    No. Grade 5 steel. That's why I bake potatoed it

    Seems like flawed logic to me.

    Nuh uh!

    Not sure why you think aluminum foil wrapped around the bolt head is going to prevent the steel bolt from affecting the toroidal's magnetic field.
  • gudnoyez
    gudnoyez Posts: 8,219
    Options
    Good to know a stainless steel bolt nut and washer and some dynamat extreme is what I'm after tommorow then, glad I double checked.
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
  • F1nut
    F1nut Posts: 52,406
    Options
    gudnoyez wrote: »
    Good to know a stainless steel bolt nut and washer and some dynamat extreme is what I'm after tommorow then, glad I double checked.

    Brass or aluminum will work too.
  • Unknown
    Options
    This content has been removed.
  • Unknown
    Options
    This content has been removed.
  • gudnoyez
    gudnoyez Posts: 8,219
    Options
    pitdogg2 wrote: »
    Dang it all around me ... Glad it didn't arrive today rained cats and dogs. It would have been in the rain for hours.

    It rained like crazy here to I was worried all day that if it showed up it would be soaked but it fit in our rather large mailbox with barley room to spare, surprised it did not tip over from the weight.
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)