Depends on what binding posts, caps, and resistors he used. Might actually not be too nutty, especially if that's Canadian dollars.
It would cost you more than $850 CDN to buy a pair of 2A's and fully upgrade them like that unless you do the soldering yourself.
Yeah, but lets all be honest.... very few outside this forum would value the "upgrades"....
And no one wants to pay the full value of any upgrade, especially if they are used (again outside this forum).
Hell look what fully moded LSi 9's went for shipped and that was ON THIS FORUM
Once you mod a speaker assume a loss of at least 50% of the cost of the mods and forget even factoring in labor lol.... You dont do the mod to increase resale, you do it because you enjoy the better sound out of it.
Its why I wont mod anything unless I know I'm keeping it long term (damn I miss my 11TL's sometimes ).
"....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
Google says that's only $600 US dollars, I don't know I really don't think that's too ridiculous. I paid $400 for my mint but stock 2B's plus drove and slept in my car for 2 days straight.
Google says that's only $600 US dollars, I don't know I really don't think that's too ridiculous. I paid $400 for my mint but stock 2B's plus drove and slept in my car for 2 days straight.
I see where you're coming from though.
Yup, I dont disagree he should be able to get something, but most folks outside this forum would think your just as crazy for what you did, but it comes down to how rare they are in that location, and if someone really wants em bad..
But for me, thats a price I'd be willing to pay maybe for 1C's and some of the higher ones, but not that the lower models like that one. I also dont "have" to have SDA's, but there might be some other speakers that would tempt me to overpay for them...
"....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
What would "most" people on this forum pay for a flawless pair of 1.2tl's with the Fortress crossover modification and the dreadnaught included with it?
3K? 4K? Or even a whole lot more. Possibly even up to what it actually costs to buy the pair of speakers and then buy all the mods too. (probably 12 thousand).
But a member of the great unwashed public? No way.
Great deal David. Your closer to the Newburg bridge than me-go get'm JK
My legs hurt LOL
POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
PIONEER PL-510A SONY BDP S5100
POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1
Yea, mine wont ever get sold as they are just DAMNED good at what they do.
"....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
McCormack DNA-1 Amp, Parasound Halo P5 Pre Amp, Denon DVD 2900 CD player, Adcom GDA 700 DAC, VPI Traveler TT with Denon 103R cartridge, Lounge Audio MKiii phono pre and Copla SUT, Polk SDA SRS 3.1 TL speakers, Tributaries series 8 IC's and speaker cable.
I did a 4 hour round trip for my SDA-CRS pair. In 1998, I did 30 seconds for my 2.3tl's. My uncle, one street over sold them to me when I was 19 years old. Still love them!
Easily. I did 26 hours for 2B's, I'd do 5 hours for 3.1's without a second thought.
Thanks. Spoke with the guy via email, going to check them out on Saturday.
McCormack DNA-1 Amp, Parasound Halo P5 Pre Amp, Denon DVD 2900 CD player, Adcom GDA 700 DAC, VPI Traveler TT with Denon 103R cartridge, Lounge Audio MKiii phono pre and Copla SUT, Polk SDA SRS 3.1 TL speakers, Tributaries series 8 IC's and speaker cable.
Comments
Yeah, but lets all be honest.... very few outside this forum would value the "upgrades"....
And no one wants to pay the full value of any upgrade, especially if they are used (again outside this forum).
Hell look what fully moded LSi 9's went for shipped and that was ON THIS FORUM
Once you mod a speaker assume a loss of at least 50% of the cost of the mods and forget even factoring in labor lol.... You dont do the mod to increase resale, you do it because you enjoy the better sound out of it.
Its why I wont mod anything unless I know I'm keeping it long term (damn I miss my 11TL's sometimes
I see where you're coming from though.
Village Idiot of Club Polk
That's ridiculous, I can agree on that one. Monitor 10's should be around $150 USD stock. The 2A's though... I don't know. Not terrible.
Village Idiot of Club Polk
Yup, I dont disagree he should be able to get something, but most folks outside this forum would think your just as crazy for what you did, but it comes down to how rare they are in that location, and if someone really wants em bad..
But for me, thats a price I'd be willing to pay maybe for 1C's and some of the higher ones, but not that the lower models like that one. I also dont "have" to have SDA's, but there might be some other speakers that would tempt me to overpay for them...
3K? 4K? Or even a whole lot more. Possibly even up to what it actually costs to buy the pair of speakers and then buy all the mods too. (probably 12 thousand).
But a member of the great unwashed public? No way.
https://mankato.craigslist.org/ele/5392177784.html
https://hudsonvalley.craigslist.org/ele/5466476690.html
Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
Interconnect: Furez 10/2 with SpeakONs
ICs: Custom Furez by Douglas Connections
Den:
Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
Carver CT-3 Pre, Carver C-500
dhsspeakerservice.com/
Exclusive Distributor of Gimpod's Custom SDA Circuit Boards
"And keep her under 70, would you, huh? Betty likes a slow ride"
...
Randy / Maine
SDA-CRS+ 198 tweeters. WMG upgraded crossovers.
Larry's rings. Stands w/Polk Logo & Spiked nicely
RTA15TL 198 tweeters. WMG upgraded crossovers.
Larry's rings. Gloss tops shine. Spiked nicely
Cs1000p-Yamaha-Parasound-Acurus
MIT speaker cables-Pangea powercords
Camp: Klipsch Heresy ii's Dayton Audio
Dta100a MITcables.Dedicated 100w Grape Solar
panel 2d/c batteries 400w inverter
My legs hurt LOL
POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
PIONEER PL-510A SONY BDP S5100
POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1
No affiliation.
http://www.ebay.com/itm/FLAGSHIP-POLK-AUDIO-SDA-SRS-TOWER-SPEAKERS-/172118040145?hash=item281308de51:g:qfoAAOSwzgRW1IRi
http://denver.craigslist.org/ele/5465358880.html
Village Idiot of Club Polk
I see some other older SDA's in the background, 1A's?
http://denver.craigslist.org/ele/5467704167.html
Village Idiot of Club Polk
Only posting because I believe they're hard to find?
http://denver.craigslist.org/ele/5470168444.html
Village Idiot of Club Polk
Yea, mine wont ever get sold as they are just DAMNED good at what they do.
What do they do?
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's
I think they play music?
3.1TL's in Tallahassee
SRS 2.3TL (Fully Modded)...SDA-1A (Fully Modded with Dimensional Tweeter Delete)
1KVA Dreadnought
Marantz SA 8005
Pioneer PLX-1000 Turntable - Shure SC35C/N35X - V15III/VN35HE
Yamaha TX-540 Tuner...Sony BDP-S570
Sony PS4
Separate subpanel with four dedicated 20 amp circuits.
1. Amplification 2. Analog 3. Digital 4. Video
"All THAT IS LOST FROM THE SOURCE IS LOST FOREVER"
1A's? in Williamsburg
Look to be in good shape
SRS 2.3TL (Fully Modded)...SDA-1A (Fully Modded with Dimensional Tweeter Delete)
1KVA Dreadnought
Marantz SA 8005
Pioneer PLX-1000 Turntable - Shure SC35C/N35X - V15III/VN35HE
Yamaha TX-540 Tuner...Sony BDP-S570
Sony PS4
Separate subpanel with four dedicated 20 amp circuits.
1. Amplification 2. Analog 3. Digital 4. Video
"All THAT IS LOST FROM THE SOURCE IS LOST FOREVER"
Think those are worth a 5 hour round trip?
Easily. I did 26 hours for 2B's, I'd do 5 hours for 3.1's without a second thought.
Village Idiot of Club Polk
" But boy do I remember the strain of her refrain " LG
SRS 2.3TL (Fully Modded)...SDA-1A (Fully Modded with Dimensional Tweeter Delete)
1KVA Dreadnought
Marantz SA 8005
Pioneer PLX-1000 Turntable - Shure SC35C/N35X - V15III/VN35HE
Yamaha TX-540 Tuner...Sony BDP-S570
Sony PS4
Separate subpanel with four dedicated 20 amp circuits.
1. Amplification 2. Analog 3. Digital 4. Video
"All THAT IS LOST FROM THE SOURCE IS LOST FOREVER"
Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC
Thanks. Spoke with the guy via email, going to check them out on Saturday.
Gas is cheap, and there's nothing like an SDA Road Trip! Good Luck!
Good luck!