Vintage Monitor and SDA Speaker Deals

Options
1…5960626465…259

Comments

  • lawdogg
    lawdogg Posts: 470
    Options
    Gone already!
    <3 my 3.1TLs

    I will fix your shifted magnets for free. :)
  • hytekrednek
    Options
    I am surprised it lasted that long. Wish I was closer, like everyone else on this forum probably. NICE deal.
  • PolkieMan
    PolkieMan Posts: 2,446
    Options
    rmpolk wrote: »
    Somewhat on the high side [and not in the good way!] Besides you got to wonder about someone that would spend 1300 use it for 3 months then stick it in the closet for 25 years?

    bought them, wife complained, put them in the closet, ?Keller Texas 43,000 pop.? shoved up against a wall, does not know how to use them decide to sell them.
    POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
    POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
    PIONEER PL-510A SONY BDP S5100
    POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
    ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1
  • Legender
    Legender Posts: 478
    Options
    There is another posting here in the musical instruments section.
    http://dallas.craigslist.org/ftw/msg/5422476796.html

    He has three sets; 1 SDA 2s and one SDA 1C... Does not know how to use them and does not have the crossover cables for them. The one set of SDA2's is the nicest cosmetically. They all sound decent. They belonged to his brother who moved and wants to sell them. Still had them as of Sunday 2/7.

    No association/affiliation with this CL poster.
    Music: Oppo103 - Parasound JC2 - Parasound A21- SDA 3.1
    Theater: Denon 3808 - B&K 7500/Emotiva XPA-3- RTi12, CSi5, RTiA7x4, PSW505
    Sleeping: Marantz 70005 - Harman Kardon 2400 - SDA 2
    2 Channel: Cary 306 SACD - Canary Audio 906 - Pass Labs x250 - PS Audio Perfectwave DAC, Polk LSiM705, SVS SB13 Ultra
    Office: Dell Optiplex, Emotiva XDA-2, Adcom 5500, LSiM 703
    Spares: Yamaha CA-810; LSi 15; Kenwood Basic M2a, Yamaha M60/M80, Polk Monitor 7, SVS SB13 Ultra
  • dkfreebird
    dkfreebird Posts: 1,189
    Options
    I picked up the pair of Crs's he had yesterday .The 2b's are pin blade and in pretty good shape.The others have the dual horizontal tweeters and the tops were replaced and it wasn't a good job.
    2 Channel
    Polk 1.2tl's Modded with dreadnought
    Musical Fidelity M6Si
    Eversolo Dmp 8
    SVS SB3000 sub

    Oppo 103
    Pangea PC
    Wireworld Equinox 7 interconnects
    Wireworld Equinox 7 Speaker Cables and Jumpers

    Backups 2.3tl, Crs+ pin/blade with stands.Monitor 5&7 peerless,Polk R200,Usher CP6311.McCormack Dna 0.5 Deluxe McCormack Dna 1,Dared Sl 2000A,Dayens Ampino,Rogue Magnum 66 pre
  • Legender
    Legender Posts: 478
    Options
    I agree the 2Bs are the in the best shape, but still think he's asking too much for them. Good pick up on the CRs's... I did not look at those while I was there. Kinda have my heart set on a 1C pair.
    Music: Oppo103 - Parasound JC2 - Parasound A21- SDA 3.1
    Theater: Denon 3808 - B&K 7500/Emotiva XPA-3- RTi12, CSi5, RTiA7x4, PSW505
    Sleeping: Marantz 70005 - Harman Kardon 2400 - SDA 2
    2 Channel: Cary 306 SACD - Canary Audio 906 - Pass Labs x250 - PS Audio Perfectwave DAC, Polk LSiM705, SVS SB13 Ultra
    Office: Dell Optiplex, Emotiva XDA-2, Adcom 5500, LSiM 703
    Spares: Yamaha CA-810; LSi 15; Kenwood Basic M2a, Yamaha M60/M80, Polk Monitor 7, SVS SB13 Ultra
  • MrBuhl
    MrBuhl Posts: 2,419
    Options
    notified wrote: »
    SDA SRS 3.1TL's about 50 miles northwest of Toronto near Hillsburg. Said to be in good condition with interconnect. [said org.cost was apx $2000 and looking for $500 ] Also selling a Denon AV amp model 2800 org, price $1300 will take $350 Originally offered to sell to me but I'm to far to purchase and ship so I offered to pass it along here call Don at 519-855-6819

    Dang I would be all over those 3.1TL's if they were here in the States! That's as good a price as I have seen on a set of these!
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • Nightfall
    Nightfall Posts: 10,083
    edited February 2016
    Options
    Depends on what binding posts, caps, and resistors he used. Might actually not be too nutty, especially if that's Canadian dollars.

    It would cost you more than $850 CDN to buy a pair of 2A's and fully upgrade them like that unless you do the soldering yourself.
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • EndersShadow
    EndersShadow Posts: 17,753
    edited February 2016
    Options
    Nightfall wrote: »
    Depends on what binding posts, caps, and resistors he used. Might actually not be too nutty, especially if that's Canadian dollars.

    It would cost you more than $850 CDN to buy a pair of 2A's and fully upgrade them like that unless you do the soldering yourself.

    Yeah, but lets all be honest.... very few outside this forum would value the "upgrades"....

    And no one wants to pay the full value of any upgrade, especially if they are used (again outside this forum).

    Hell look what fully moded LSi 9's went for shipped and that was ON THIS FORUM

    Once you mod a speaker assume a loss of at least 50% of the cost of the mods and forget even factoring in labor lol.... You dont do the mod to increase resale, you do it because you enjoy the better sound out of it.

    Its why I wont mod anything unless I know I'm keeping it long term (damn I miss my 11TL's sometimes :cry: ).
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • Nightfall
    Nightfall Posts: 10,083
    edited February 2016
    Options
    Google says that's only $600 US dollars, I don't know I really don't think that's too ridiculous. I paid $400 for my mint but stock 2B's plus drove and slept in my car for 2 days straight.

    I see where you're coming from though.
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • Nightfall
    Nightfall Posts: 10,083
    Options
    nbrowser wrote: »
    uhm he's also asking $750 for the bone stock Monitor 10s too...

    That's ridiculous, I can agree on that one. Monitor 10's should be around $150 USD stock. The 2A's though... I don't know. Not terrible.
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • EndersShadow
    EndersShadow Posts: 17,753
    Options
    Nightfall wrote: »
    Google says that's only $600 US dollars, I don't know I really don't think that's too ridiculous. I paid $400 for my mint but stock 2B's plus drove and slept in my car for 2 days straight.

    I see where you're coming from though.

    Yup, I dont disagree he should be able to get something, but most folks outside this forum would think your just as crazy for what you did, but it comes down to how rare they are in that location, and if someone really wants em bad..

    But for me, thats a price I'd be willing to pay maybe for 1C's and some of the higher ones, but not that the lower models like that one. I also dont "have" to have SDA's, but there might be some other speakers that would tempt me to overpay for them...
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • oldmodman
    Options
    What would "most" people on this forum pay for a flawless pair of 1.2tl's with the Fortress crossover modification and the dreadnaught included with it?
    3K? 4K? Or even a whole lot more. Possibly even up to what it actually costs to buy the pair of speakers and then buy all the mods too. (probably 12 thousand).
    But a member of the great unwashed public? No way.
  • westmassguy
    westmassguy Posts: 6,850
    Options
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer

    dhsspeakerservice.com/
  • boston1450
    boston1450 Posts: 7,758
    Options
    Great deal David. Your closer to the Newburg bridge than me-go get'm :) JK
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
  • PolkieMan
    PolkieMan Posts: 2,446
    Options
    boston1450 wrote: »
    Great deal David. Your closer to the Newburg bridge than me-go get'm :) JK

    My legs hurt LOL
    POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
    POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
    PIONEER PL-510A SONY BDP S5100
    POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
    ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1
  • Tacitus86
    Tacitus86 Posts: 19
    Options
    A pair of 1st generation SDA SRS in Tallahassee, FL on eBay for $1700 OBO, condition is a bit rough:

    No affiliation.

    http://www.ebay.com/itm/FLAGSHIP-POLK-AUDIO-SDA-SRS-TOWER-SPEAKERS-/172118040145?hash=item281308de51:g:qfoAAOSwzgRW1IRi

  • Nightfall
    Nightfall Posts: 10,083
    Options
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • Nightfall
    Nightfall Posts: 10,083
    Options
    SDA 2A's - $200

    I see some other older SDA's in the background, 1A's?

    http://denver.craigslist.org/ele/5467704167.html

    00x0x_22COvJ2Iwm8_600x450.jpg
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • Nightfall
    Nightfall Posts: 10,083
    Options
    LSi F/X - $495

    Only posting because I believe they're hard to find?

    http://denver.craigslist.org/ele/5470168444.html

    00N0N_8dK1fpNEtGx_600x450.jpg
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • EndersShadow
    EndersShadow Posts: 17,753
    Options
    Nightfall wrote: »
    LSi F/X - $495

    Only posting because I believe they're hard to find?

    http://denver.craigslist.org/ele/5470168444.html

    00N0N_8dK1fpNEtGx_600x450.jpg

    Yea, mine wont ever get sold as they are just DAMNED good at what they do.
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • xjghost
    xjghost Posts: 1,115
    Options
    Nightfall wrote: »
    LSi F/X - $495

    Only posting because I believe they're hard to find?

    http://denver.craigslist.org/ele/5470168444.html

    00N0N_8dK1fpNEtGx_600x450.jpg

    Yea, mine wont ever get sold as they are just DAMNED good at what they do.

    What do they do?
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's
  • akajimmy
    akajimmy Posts: 50
    Options
    xjghost wrote: »
    Nightfall wrote: »
    LSi F/X - $495

    Only posting because I believe they're hard to find?

    http://denver.craigslist.org/ele/5470168444.html

    00N0N_8dK1fpNEtGx_600x450.jpg

    Yea, mine wont ever get sold as they are just DAMNED good at what they do.

    What do they do?

    I think they play music? >:)
  • machone
    machone Posts: 1,587
    Options
    Mojo Audio Illuminati v3>>Quantum Byte w/LMS>>Rpi/PiCoreplayer>> Starlight 7 USB >> Mojo Audio Mystique v2 SE>>ModWright SWL 9.0 SE Signature>>Hafler DH-500 Amp+ (Musical Concepts Fully Modded)>>
    SRS 2.3TL (Fully Modded)...Velodyne Optimum 8 subwoofer
    1KVA Dreadnought

    Marantz SA 8005
    Pioneer PLX-1000 Turntable - Shure SC35C/N35X - V15III/VN35HE
    Yamaha TX-540 Tuner...Sony BDP-S570
    Sony PS4

    Separate subpanel with four dedicated 20 amp circuits.
    1. Amplification 2. Analog 3. Digital 4. Video

    "All THAT IS LOST FROM THE SOURCE IS LOST FOREVER"
  • machone
    machone Posts: 1,587
    Options
    https://norfolk.craigslist.org/ele/5385200301.html
    1A's? in Williamsburg
    Look to be in good shape
    Mojo Audio Illuminati v3>>Quantum Byte w/LMS>>Rpi/PiCoreplayer>> Starlight 7 USB >> Mojo Audio Mystique v2 SE>>ModWright SWL 9.0 SE Signature>>Hafler DH-500 Amp+ (Musical Concepts Fully Modded)>>
    SRS 2.3TL (Fully Modded)...Velodyne Optimum 8 subwoofer
    1KVA Dreadnought

    Marantz SA 8005
    Pioneer PLX-1000 Turntable - Shure SC35C/N35X - V15III/VN35HE
    Yamaha TX-540 Tuner...Sony BDP-S570
    Sony PS4

    Separate subpanel with four dedicated 20 amp circuits.
    1. Amplification 2. Analog 3. Digital 4. Video

    "All THAT IS LOST FROM THE SOURCE IS LOST FOREVER"
  • StevieB
    StevieB Posts: 257
    Options
    machone wrote: »

    Think those are worth a 5 hour round trip?
    McCormack DNA-1 Amp, Parasound Halo P5 Pre Amp, Denon DVD 2900 CD player, Adcom GDA 700 DAC, VPI Traveler TT with Denon 103R cartridge, Lounge Audio MKiii phono pre and Copla SUT, Polk SDA SRS 3.1 TL speakers, Tributaries series 8 IC's and speaker cable.
  • Nightfall
    Nightfall Posts: 10,083
    edited March 2016
    Options
    StevieB wrote: »
    machone wrote: »

    Think those are worth a 5 hour round trip?

    Easily. I did 26 hours for 2B's, I'd do 5 hours for 3.1's without a second thought.
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • TCK
    TCK Posts: 231
    Options
    I did a 5 hr round trip for my 2b's. I would do it again in a heartbeat
    - L200 Legends (Black Oak)
    - SDA 2B (1989, Oak Tops, 194s, Spikes)
    - Monitor 7B (1982 Peerless, Sonicaps, Mills, Binding Posts)
    - (2) SVS SB12-NSD (Flat Black)
    - SVS SB 3000 (Gloss Black)
    - CSi A6 Center (Cherry)
    - Pioneer SC-1222K (7.1 AVR)
    - Marantz MM 7055 (5 Ch Amp)
    - Pioneer PD-D6 SACD Player
    - Marantz NR1403 (5.2 AVR)
    - Sony UBP-X800M2 (4k Blu-ray)
    - Sony UBP-X1100ES (4K Blu-ray)
    - Adcom GFA 555 Amp
    - Monitor 5 (194s, Side Surrounds)
    - Monitor 5Jr+ (194s) {Storage}
    - LG OLED65CXPUA (4K OLED TV)
    - LG 55UN7300PUF (4K HD TV)
    - RT35i (Cherry)
    - (2 Pair) RT25i (Cherry)
    - CS400 (Center)
    - CS350 (Center)
    - F/Xi A4 (Rear Surrounds)
    - RT25 (Rear Surrounds) {Storage}
    - Audioquest Interconnects
    - Blu-Jean Speaker Cables & Interconnects



    " But boy do I remember the strain of her refrain " LG