Vintage Monitor and SDA Speaker Deals

16061636566250

Comments

  • notified
    notified Posts: 175
    edited February 2016
    SDA SRS 3.1TL's about 50 miles northwest of Toronto near Hillsburg. Said to be in good condition with interconnect. [said org.cost was apx $2000 and looking for $500 ] Also selling a Denon AV amp model 2800 org, price $1300 will take $350 Originally offered to sell to me but I'm to far to purchase and ship so I offered to pass it along here call Don at 519-855-6819
    Post edited by [Deleted User] on
  • akajimmy wrote: »
    la2vegas wrote: »
    Jimmy it looks like the seller has more gear lying around. After you check out those crs's quiz him on his other gear. He might have a little hoarder in him that's finally ready to sell his stash.

    absolutley. I am kind of curious what the CRS were sitting on.

    So I took the dive into SDA and bought these. The speakers these were sitting on were some Klipsch speakers. He also had some 2.1 SDA that he was keeping, not parting with them. He also had some 10A that he was going to sell. A very good day, trying to get use to the CRS after listening to the 10's for long time.
  • Mystery
    Mystery Posts: 2,546
    edited January 2016
    SDA 2B - Looks like two pairs for $300.
    http://denver.craigslist.org/ele/5420981061.html

    00c0c_5U8J74d3VtW_600x450.jpg00O0O_kpj6nS6QdLv_600x450.jpg


    Klipsch RB81, KG3.5, B&W DM602.5, Polk.
    Subwoofers: Klipsch RW10, Triad ProSub Bronze.
  • ambiophonics
    ambiophonics Posts: 726
    edited February 2016
    sda.jpg 19.5K
    2 Channel - Polk SDA-2BTL, Carver TFM-35, Peachtree iDAC, Qobuz streamed via Episode Lynk using bubble UPnP server
  • MrBuhl
    MrBuhl Posts: 2,419
    edited February 2016
    ^^ thats a steal! ^^ IF all the drivers are working I guess...
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • lawdogg
    lawdogg Posts: 455
    Gone already!
    <3 my 3.1TLs

    I will fix your shifted magnets for free. :)
  • I am surprised it lasted that long. Wish I was closer, like everyone else on this forum probably. NICE deal.
  • PolkieMan
    PolkieMan Posts: 2,446
    rmpolk wrote: »
    Somewhat on the high side [and not in the good way!] Besides you got to wonder about someone that would spend 1300 use it for 3 months then stick it in the closet for 25 years?

    bought them, wife complained, put them in the closet, ?Keller Texas 43,000 pop.? shoved up against a wall, does not know how to use them decide to sell them.
    POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
    POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
    PIONEER PL-510A SONY BDP S5100
    POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
    ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1
  • Legender
    Legender Posts: 478
    There is another posting here in the musical instruments section.
    http://dallas.craigslist.org/ftw/msg/5422476796.html

    He has three sets; 1 SDA 2s and one SDA 1C... Does not know how to use them and does not have the crossover cables for them. The one set of SDA2's is the nicest cosmetically. They all sound decent. They belonged to his brother who moved and wants to sell them. Still had them as of Sunday 2/7.

    No association/affiliation with this CL poster.
    Music: Oppo103 - Parasound JC2 - Parasound A21- SDA 3.1
    Theater: Denon 3808 - B&K 7500/Emotiva XPA-3- RTi12, CSi5, RTiA7x4, PSW505
    Sleeping: Marantz 70005 - Harman Kardon 2400 - SDA 2
    2 Channel: Cary 306 SACD - Canary Audio 906 - Pass Labs x250 - PS Audio Perfectwave DAC, Polk LSiM705, SVS SB13 Ultra
    Office: Dell Optiplex, Emotiva XDA-2, Adcom 5500, LSiM 703
    Spares: Yamaha CA-810; LSi 15; Kenwood Basic M2a, Yamaha M60/M80, Polk Monitor 7, SVS SB13 Ultra
  • dkfreebird
    dkfreebird Posts: 1,186
    I picked up the pair of Crs's he had yesterday .The 2b's are pin blade and in pretty good shape.The others have the dual horizontal tweeters and the tops were replaced and it wasn't a good job.
    2 Channel
    Polk 1.2tl's Modded with dreadnought
    Musical Fidelity M6Si
    North Star Intenso Dac
    Auralic Aries Mini Streamer
    Oppo 103
    Pangea PC
    Wireworld Equinox 7 interconnects
    Wireworld Equinox 7 Speaker Cables and Jumpers

    Backups 2.3tl, Crs+ pin/blade with stands.Monitor 5 peerless,Monitor 4 peerless,Polk R200,McCormack Dna 0.5 Deluxe McCormack Dna 1,Dared Sl 2000A,Dayens Ampino Rogue Magnum 66 pre
  • Legender
    Legender Posts: 478
    I agree the 2Bs are the in the best shape, but still think he's asking too much for them. Good pick up on the CRs's... I did not look at those while I was there. Kinda have my heart set on a 1C pair.
    Music: Oppo103 - Parasound JC2 - Parasound A21- SDA 3.1
    Theater: Denon 3808 - B&K 7500/Emotiva XPA-3- RTi12, CSi5, RTiA7x4, PSW505
    Sleeping: Marantz 70005 - Harman Kardon 2400 - SDA 2
    2 Channel: Cary 306 SACD - Canary Audio 906 - Pass Labs x250 - PS Audio Perfectwave DAC, Polk LSiM705, SVS SB13 Ultra
    Office: Dell Optiplex, Emotiva XDA-2, Adcom 5500, LSiM 703
    Spares: Yamaha CA-810; LSi 15; Kenwood Basic M2a, Yamaha M60/M80, Polk Monitor 7, SVS SB13 Ultra
  • MrBuhl
    MrBuhl Posts: 2,419
    notified wrote: »
    SDA SRS 3.1TL's about 50 miles northwest of Toronto near Hillsburg. Said to be in good condition with interconnect. [said org.cost was apx $2000 and looking for $500 ] Also selling a Denon AV amp model 2800 org, price $1300 will take $350 Originally offered to sell to me but I'm to far to purchase and ship so I offered to pass it along here call Don at 519-855-6819

    Dang I would be all over those 3.1TL's if they were here in the States! That's as good a price as I have seen on a set of these!
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • Nightfall
    Nightfall Posts: 10,086
    edited February 2016
    Depends on what binding posts, caps, and resistors he used. Might actually not be too nutty, especially if that's Canadian dollars.

    It would cost you more than $850 CDN to buy a pair of 2A's and fully upgrade them like that unless you do the soldering yourself.
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • EndersShadow
    EndersShadow Posts: 17,590
    edited February 2016
    Nightfall wrote: »
    Depends on what binding posts, caps, and resistors he used. Might actually not be too nutty, especially if that's Canadian dollars.

    It would cost you more than $850 CDN to buy a pair of 2A's and fully upgrade them like that unless you do the soldering yourself.

    Yeah, but lets all be honest.... very few outside this forum would value the "upgrades"....

    And no one wants to pay the full value of any upgrade, especially if they are used (again outside this forum).

    Hell look what fully moded LSi 9's went for shipped and that was ON THIS FORUM

    Once you mod a speaker assume a loss of at least 50% of the cost of the mods and forget even factoring in labor lol.... You dont do the mod to increase resale, you do it because you enjoy the better sound out of it.

    Its why I wont mod anything unless I know I'm keeping it long term (damn I miss my 11TL's sometimes :cry: ).
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • Nightfall
    Nightfall Posts: 10,086
    edited February 2016
    Google says that's only $600 US dollars, I don't know I really don't think that's too ridiculous. I paid $400 for my mint but stock 2B's plus drove and slept in my car for 2 days straight.

    I see where you're coming from though.
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • Nightfall
    Nightfall Posts: 10,086
    nbrowser wrote: »
    uhm he's also asking $750 for the bone stock Monitor 10s too...

    That's ridiculous, I can agree on that one. Monitor 10's should be around $150 USD stock. The 2A's though... I don't know. Not terrible.
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • EndersShadow
    EndersShadow Posts: 17,590
    Nightfall wrote: »
    Google says that's only $600 US dollars, I don't know I really don't think that's too ridiculous. I paid $400 for my mint but stock 2B's plus drove and slept in my car for 2 days straight.

    I see where you're coming from though.

    Yup, I dont disagree he should be able to get something, but most folks outside this forum would think your just as crazy for what you did, but it comes down to how rare they are in that location, and if someone really wants em bad..

    But for me, thats a price I'd be willing to pay maybe for 1C's and some of the higher ones, but not that the lower models like that one. I also dont "have" to have SDA's, but there might be some other speakers that would tempt me to overpay for them...
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • What would "most" people on this forum pay for a flawless pair of 1.2tl's with the Fortress crossover modification and the dreadnaught included with it?
    3K? 4K? Or even a whole lot more. Possibly even up to what it actually costs to buy the pair of speakers and then buy all the mods too. (probably 12 thousand).
    But a member of the great unwashed public? No way.
  • westmassguy
    westmassguy Posts: 6,850
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer

    dhsspeakerservice.com/
  • boston1450
    boston1450 Posts: 7,629
    Great deal David. Your closer to the Newburg bridge than me-go get'm :) JK
    ..
  • PolkieMan
    PolkieMan Posts: 2,446
    boston1450 wrote: »
    Great deal David. Your closer to the Newburg bridge than me-go get'm :) JK

    My legs hurt LOL
    POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
    POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
    PIONEER PL-510A SONY BDP S5100
    POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
    ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1
  • Tacitus86
    Tacitus86 Posts: 19
    A pair of 1st generation SDA SRS in Tallahassee, FL on eBay for $1700 OBO, condition is a bit rough:

    No affiliation.

    http://www.ebay.com/itm/FLAGSHIP-POLK-AUDIO-SDA-SRS-TOWER-SPEAKERS-/172118040145?hash=item281308de51:g:qfoAAOSwzgRW1IRi

  • Nightfall
    Nightfall Posts: 10,086
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • Nightfall
    Nightfall Posts: 10,086
    SDA 2A's - $200

    I see some other older SDA's in the background, 1A's?

    http://denver.craigslist.org/ele/5467704167.html

    00x0x_22COvJ2Iwm8_600x450.jpg
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • Nightfall
    Nightfall Posts: 10,086
    LSi F/X - $495

    Only posting because I believe they're hard to find?

    http://denver.craigslist.org/ele/5470168444.html

    00N0N_8dK1fpNEtGx_600x450.jpg
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
  • EndersShadow
    EndersShadow Posts: 17,590
    Nightfall wrote: »
    LSi F/X - $495

    Only posting because I believe they're hard to find?

    http://denver.craigslist.org/ele/5470168444.html

    00N0N_8dK1fpNEtGx_600x450.jpg

    Yea, mine wont ever get sold as they are just DAMNED good at what they do.
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • xjghost
    xjghost Posts: 1,093
    Nightfall wrote: »
    LSi F/X - $495

    Only posting because I believe they're hard to find?

    http://denver.craigslist.org/ele/5470168444.html

    00N0N_8dK1fpNEtGx_600x450.jpg

    Yea, mine wont ever get sold as they are just DAMNED good at what they do.

    What do they do?
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's
  • akajimmy
    akajimmy Posts: 50
    xjghost wrote: »
    Nightfall wrote: »
    LSi F/X - $495

    Only posting because I believe they're hard to find?

    http://denver.craigslist.org/ele/5470168444.html

    00N0N_8dK1fpNEtGx_600x450.jpg

    Yea, mine wont ever get sold as they are just DAMNED good at what they do.

    What do they do?

    I think they play music? >:)