I will post a new thread in the next couple of days just to keep it in order for everyone that's wanting them, and we can keep it in order, and that will give me an idea of how many I need to make..
Quick question: On my RTA12's, when I push in the PR the midwoofers stay out indefinitely. They don't recede at all. Am I correct in assuming that I would either not benefit or that the benefit would be negligible if I added rings or hurricane nuts?
My Monitor 5's are another story, they recede after a short amount of time. Being they are set to "small" in my AVR, does that mean they wouldn't see a great benefit either?
I would like a pair for my sda 1b, i assume the 1c is the same thing. I really want in on this. I will be on the look out for the new thread, thanks larry!!
Quick question: On my RTA12's, when I push in the PR the midwoofers stay out indefinitely. They don't recede at all. Am I correct in assuming that I would either not benefit or that the benefit would be negligible if I added rings or hurricane nuts?
The mid-drivers have to vent and they do so via the dust caps. Not sure why yours are not, but it is an opposite problem.
Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
Quick question: On my RTA12's, when I push in the PR the midwoofers stay out indefinitely. They don't recede at all. Am I correct in assuming that I would either not benefit or that the benefit would be negligible if I added rings or hurricane nuts?
My Monitor 5's are another story, they recede after a short amount of time. Being they are set to "small" in my AVR, does that mean they wouldn't see a great benefit either?
You may want to check if the mid drivers are original as they should be vented and air should pass after few seconds.
It should not stand out forever.
Sonus Faber Concerto Grand Piano, Epicure 20+, T/E 280, 100V, Polk. Subwoofers: Monitor Audio, B&W ASW300, Polk, Triad ProSub Bronze.
The mid-drivers have to vent and they do so via the dust caps. Not sure why yours are not, but it is an opposite problem.
Okay so I had to double check. They do move back in, /VERY/ slightly, but after the slight movement they are still pushed out 80-90% of what they originally were. They don't go back in until I let go of the PR. Is that more normal?
Okay so I had to double check. They do move back in, /VERY/ slightly, but after the slight movement they are still pushed out 80-90% of what they originally were. They don't go back in until I let go of the PR. Is that more normal?
There is a resting position. When you push the PR in the mid-drivers move out to their maximum excursion, then slowly recede. When you release the PR it sucks the mid-drivers in to that maximum excursion, then they move back out to their resting position.
Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
If and when these come back to life, I'd be in for 1c's and 2b's
VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000
Polk SDA1c modded
Polk CRS+ 4.1TL modded (need veneer)
Polk SDA2BTL (fully modded)
A/L 1000VA Dreadnought Canare 4s11 SDA cable
SACD Marantz DV8300
Sony S9000ES CD/DVD/SACD
Yamaha YP-D6
Soundcraftsmen PCR800
Audible Illusions L1 Preamp
Vincent MFA based Cocci Tube Preamp
Pho-700 Phono Pre
Signal Cable Silver Resolution IC's
I will post a new thread in the next couple of days just to keep it in order for everyone that's wanting them, and we can keep it in order, and that will give me an idea of how many I need to make..
I try to log on daily and I haven't seen any new posts, please put me down for three,
TY Larry
Glenn
Power Rogue M180 monos & Adcom GFA 5802
PS Audio PerfectWave Power Plant 10
Rears Salk SuperCharged Surrounds
Source PSA PWT into NSD Supremo
Pre/Pro Integra DHC 40.1
LCD Samsung LN46B750
Mains Salk HT2-TL
Center Salk HT2C
Pre Cary SLP-05
Wires WW & MIT
Since I am retiring soon I will need something to do with my free time. I would ask for a set for 2.3tl's and CRS+ and 2b's. Tweeters as well.
Thanks for doing this.
Nathan
Home Rig
SDA 2.3TL's front and center
Polk 1000p Center
Pioneer Elite SC35 Receiver (Pre/Surround
Sunfire Cinema Grand 5X200-Back in the mix.
OPPO BDP-93
Squeezebox
Stepped up to name brand Speaker Cables and interconnects!
Monitor 4, 5, 7, 10's, SDA 1B's, 2B's, 2.3TL's, RTA 15TL's all in storage waiting for me.
Sales Rating #1!!
I haven't done anything just yet, I decided a while back to take care of the guys in the group buy for the dreadnought. Juggling the rings and cases would have overwhelmed my PM box since we can only have 70..
I haven't done anything just yet, I decided a while back to take care of the guys in the group buy for the dreadnought. Juggling the rings and cases would have overwhelmed my PM box since we can only have 70..
Soon!!
No problem! Sounds good Larry!
|| Polk SDA-CRS+ with all the goodies
|| Totem Hawk
|| Pass Labs Aleph 30
|| Rogue Perseus Magnum Tube Preamp
|| Dodd Reference Level Preamp
|| Chord Hugo
|| Wyred 4 Sound Remedy
|| Tidal
|| Squeezebox Touch
I'm already in for a set of rings for SDA1C's and 2.3's. The joy just keeps on coming. Possession hasn't occurred yet, but a purchase agreement made.... please add a set of rings for a pair of CRS+'s to my order.
Comments
Under 100 posters cant read it:(
I'm sure there will be some changes.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's
My Monitor 5's are another story, they recede after a short amount of time. Being they are set to "small" in my AVR, does that mean they wouldn't see a great benefit either?
Village Idiot of Club Polk
I would perhaps recommend getting this thread closed if you don't want it popping up all the time.
I would like a set of rings for the crossover plates if those are a possibility still...
I swear by my life and my love of it that I will never live for the sake of another man, nor ask another man to live for mine.” .
“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
The mid-drivers have to vent and they do so via the dust caps. Not sure why yours are not, but it is an opposite problem.
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk
You may want to check if the mid drivers are original as they should be vented and air should pass after few seconds.
It should not stand out forever.
Sonus Faber Concerto Grand Piano, Epicure 20+, T/E 280, 100V, Polk.
Subwoofers: Monitor Audio, B&W ASW300, Polk, Triad ProSub Bronze.
Village Idiot of Club Polk
Village Idiot of Club Polk
There is a resting position. When you push the PR in the mid-drivers move out to their maximum excursion, then slowly recede. When you release the PR it sucks the mid-drivers in to that maximum excursion, then they move back out to their resting position.
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk
Thanks!!!
VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000
Polk SDA1c modded
Polk CRS+ 4.1TL modded (need veneer)
Polk SDA2BTL (fully modded)
A/L 1000VA Dreadnought Canare 4s11 SDA cable
SACD Marantz DV8300
Sony S9000ES CD/DVD/SACD
Yamaha YP-D6
Soundcraftsmen PCR800
Audible Illusions L1 Preamp
Vincent MFA based Cocci Tube Preamp
Pho-700 Phono Pre
Signal Cable Silver Resolution IC's
I try to log on daily and I haven't seen any new posts, please put me down for three,
TY Larry
Glenn
PS Audio PerfectWave Power Plant 10
Rears Salk SuperCharged Surrounds
Source PSA PWT into NSD Supremo
Pre/Pro Integra DHC 40.1
LCD Samsung LN46B750
Mains Salk HT2-TL
Center Salk HT2C
Pre Cary SLP-05
Wires WW & MIT
I am going to tackle the dreadnought cases first..
I'd like to throw my hat in the ring for a set of monitor 5jr+ and also my srs's. I'm in no rush for the srs's though.
Thanks. Looking forward to the dreadnought box.
|| Totem Hawk
|| Pass Labs Aleph 30
|| Rogue Perseus Magnum Tube Preamp
|| Dodd Reference Level Preamp
|| Chord Hugo
|| Wyred 4 Sound Remedy
|| Tidal
|| Squeezebox Touch
Thanks for doing this.
Nathan
SDA 2.3TL's front and center
Polk 1000p Center
Pioneer Elite SC35 Receiver (Pre/Surround
Sunfire Cinema Grand 5X200-Back in the mix.
OPPO BDP-93
Squeezebox
Stepped up to name brand Speaker Cables and interconnects!
Monitor 4, 5, 7, 10's, SDA 1B's, 2B's, 2.3TL's, RTA 15TL's all in storage waiting for me.
Sales Rating #1!!
Great news!
garage rig monitor 10s crossovers by VR3, dynamat, RDO-194's, new drivers. psw 111 Pioneer 9040 BDP53fd 100 " screen Nakamichi HD projector, and Panasonic 65” plasma.
APC 1500, Furman Rack Rider, Cambridge Audio Dac Magic Plus, Parasound P/HP 850, Adcom GTP-880, Luxman M-300, Threshold 400A Cascode, McIntosh MC2505, MC2205, MR-71, MX-113, Sony TA-3200F, Tascam 112 MKII, Sony TC-D5 Pro, Tascam CD-200, Thorens TD-147, Kenwood KT-5500, Kenwood KT-7500, Realistic Minimus Sevens, Behringer MS40s, Boston Acoustics A40s, JBL 830Ts, 'Double' Advent Loudspeakers, Klipsch KSW12 sub, Bose 901s, Polk SDA 2s, Polk SDA 1Cs
Larry are you sending totals out to everyone or is there a thread I missed with prices? I'd like to get my payment in asap.
|| Totem Hawk
|| Pass Labs Aleph 30
|| Rogue Perseus Magnum Tube Preamp
|| Dodd Reference Level Preamp
|| Chord Hugo
|| Wyred 4 Sound Remedy
|| Tidal
|| Squeezebox Touch
Soon!!
No problem! Sounds good Larry!
|| Totem Hawk
|| Pass Labs Aleph 30
|| Rogue Perseus Magnum Tube Preamp
|| Dodd Reference Level Preamp
|| Chord Hugo
|| Wyred 4 Sound Remedy
|| Tidal
|| Squeezebox Touch
I'm already in for a set of rings for SDA1C's and 2.3's. The joy just keeps on coming. Possession hasn't occurred yet, but a purchase agreement made.... please add a set of rings for a pair of CRS+'s to my order.
In for a penny, in for a #.
Thanks much!
M_H
CRS+'s (4.1 TL's) - Office
SDA1C's - Famdamly Rm
SDA1C's - Master Bedroom
Thanks!
APC 1500, Furman Rack Rider, Cambridge Audio Dac Magic Plus, Parasound P/HP 850, Adcom GTP-880, Luxman M-300, Threshold 400A Cascode, McIntosh MC2505, MC2205, MR-71, MX-113, Sony TA-3200F, Tascam 112 MKII, Sony TC-D5 Pro, Tascam CD-200, Thorens TD-147, Kenwood KT-5500, Kenwood KT-7500, Realistic Minimus Sevens, Behringer MS40s, Boston Acoustics A40s, JBL 830Ts, 'Double' Advent Loudspeakers, Klipsch KSW12 sub, Bose 901s, Polk SDA 2s, Polk SDA 1Cs