Fall 2010 San Diego Polkie Gathering

1…1011131516…20

Comments

  • mole'
    mole' Posts: 3,160
    edited October 2010
    kawizx9r wrote: »
    The 3's are amazing IC's. Haven't heard the speaker wire version but I bet they perform admirably.

    I'd only get the 3.3's simply because they're newer :p but if I had to save money I'd get more of the 3's if I needed any.

    so i now have the MIT AVt-3 and EXp-1 for speakers
    for my ICs i have the AQ KC

    it would be a BIG upgrade huh?

    but 3k + worth it for all the stuff i wanted???
    mole'
    · Share on FacebookShare on Twitter
  • kawizx9r
    kawizx9r Posts: 5,150
    edited October 2010
    mole' wrote: »
    so i now have the MIT AVt-3 and EXp-1 for speakers
    for my ICs i have the AQ KC

    it would be a BIG upgrade huh?

    I wouldn't upgrade yet.

    I had lower end MIT speaker cables and lower end AQ IC's and they performed very well in several of my old rigs.

    If you're really not satisfied yet with your rig (in terms of dedicated 2-channel) then I'd suggest playing around with it a bit before upgrading any other equipment. Wait til I swing by :D
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
    · Share on FacebookShare on Twitter
  • mole'
    mole' Posts: 3,160
    edited October 2010
    kawizx9r wrote: »
    I wouldn't upgrade yet.

    I had lower end MIT speaker cables and lower end AQ IC's and they performed very well in several of my old rigs.

    If you're really not satisfied yet with your rig (in terms of dedicated 2-channel) then I'd suggest playing around with it a bit before upgrading any other equipment. Wait til I swing by :D

    i really have no idea what i want.

    ill wait tho

    but im pretty sure about the set of Epik Empires.

    after xmas tho
    mole'
    · Share on FacebookShare on Twitter
  • Norm Apter
    Norm Apter Posts: 1,036
    edited October 2010
    Mole': I'm going to be bringing 3 sets of Shotgun S-3 ICs and one pair of Shotgun S-3 bi-wire speaker cables to the get together, so you'll be able to a hear a system (or two) run exclusively with S-3s.

    I'm sure Joe is awesome to deal with (everybody around here speaks very highly of him) but if you're patient you can save even more money. I took my time and found 2 pair of S-3 ICs in like new condition for $200 a pop on A-gon...the third set I picked up for $220 (different seller). I also got a like-new set of Shotgun S-3 speaker cables for $580 shipped to my door (it was the same guy who sold me the two pair of ICs). Thus, we're talking about a grand total of $1200 for the four pair of cables. BTW, the guy I bought these from had purchased these from Joe but they showed no wear whatsoever. Just an FYI...
    2 Ch.
    Parasound Halo A23 Amp
    Parasound Halo P3 Preamp
    Parasound Halo T3 Tuner
    Bada HD22SE tube CD Player
    Magnum Dynalab Signal Sleuth
    Magnum Dynalab ST-2 antenna
    polkaudio Lsi9s (upgraded cross-overs)
    MIT Shotgun S-3 Bi-wire Interface Speaker Cables
    MIT Shotgun S-3 Interconnects (3)
    IegO L70530 Power cords (3)

    HT
    Denon 2808ci AVR
    polkaudio RTi A5s (fronts)
    polkaudio RTi A1s (rears)
    polkaudio Csi A6 (center)
    Signal Cable Ultra Speaker Cables
    Signal Cable Analog II Interconnects
    · Share on FacebookShare on Twitter
  • edoggrc51
    edoggrc51 Posts: 584
    edited October 2010
    mole' wrote: »
    i really have no idea what i want.

    ill wait tho

    but im pretty sure about the set of Epik Empires.

    after xmas tho

    You'll love the Empire bro, especially a pair of them. I had one for around 6months and it held it's own to the PB13ultra I also had at the time. :)
    Denon 4311ci
    MINIdsp OPEN-DRC
    XPR-5
    LS6 Line Arrays
    LS-C Center Channel
    A/V-1RS Surounds
    Quad DIY LMS Ultra subs (powered by dual IPR-7500 amps)
    Panny AE-8000u
    2:35 110in Screen
    Oppo BDP-103
    Belkin PF60
    Harmony ONE

    2ch: Emotiva Stealth 8's, Airport Express
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,068
    edited October 2010
    Norm Apter wrote: »
    Mole': I'm going to be bringing 3 sets of Shotgun S-3 ICs and one pair of Shotgun S-3 bi-wire speaker cables to the get together, so you'll be able to a hear a system (or two) run exclusively with S-3s.

    Can't wait to hear them again. They really took my system up a notch.
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,068
    edited October 2010
    I'm actually going after a pair of them on Audiogon now.....
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,068
    edited October 2010
    Too bad, got out-bid by someone else.
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,068
    edited October 2010
    2 weeks to go!

    UPDATED list of attendees and food items being brought (we had 1 add and 1 drop in the last week). I'll be finalizing a food list in the near future.

    dpowell - Baked Potatoes
    kawizx9r
    Mole' - Steaks and drinks
    norm apter - Salad and Dessert
    Steelo
    Erik Tracy
    Civilian
    edoggrc51 - chips, dip, soda and brewskis
    dacoupedeville
    phocion - snacks and brewskis

    Can someone from way up north volunteer to bring disposable cups and plates?

    I'll get address/directions and contact information out to everyone this week some time.
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • mole'
    mole' Posts: 3,160
    edited October 2010
    Norm Apter wrote: »
    Mole': I'm going to be bringing 3 sets of Shotgun S-3 ICs and one pair of Shotgun S-3 bi-wire speaker cables to the get together, so you'll be able to a hear a system (or two) run exclusively with S-3s.

    I'm sure Joe is awesome to deal with (everybody around here speaks very highly of him) but if you're patient you can save even more money. I took my time and found 2 pair of S-3 ICs in like new condition for $200 a pop on A-gon...the third set I picked up for $220 (different seller). I also got a like-new set of Shotgun S-3 speaker cables for $580 shipped to my door (it was the same guy who sold me the two pair of ICs). Thus, we're talking about a grand total of $1200 for the four pair of cables. BTW, the guy I bought these from had purchased these from Joe but they showed no wear whatsoever. Just an FYI...

    VERY NICE!!!!

    thanks
    mole'
    · Share on FacebookShare on Twitter
  • kawizx9r
    kawizx9r Posts: 5,150
    edited October 2010
    dpowell wrote: »
    Can someone from way up north volunteer to bring disposable cups and plates?

    I'll get address/directions and contact information out to everyone this week some time.

    Sure, I can bring some. Weird as it may sound, you guys don't have any preferences right? I've had parties and certain people wanted 'foam' cups over the plastic ones/etc.

    Hopefully the plates don't spoil on the way over there! :tongue::tongue::tongue: JK
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,068
    edited October 2010
    kawizx9r wrote: »
    Hopefully the plates don't spoil on the way over there! :tongue::tongue::tongue: JK

    I think as long as they haven't been used previously, they won't spoil on the way down.:tongue:

    I don't have much of a preference, just as long as the plates are sturdy enough to handle a steak and massive baked potato.

    dpowell - Baked Potatoes
    kawizx9r - plates/cups
    Mole' - Steaks and drinks
    norm apter - Salad and Dessert
    Steelo
    Erik Tracy
    Civilian
    edoggrc51 - chips, dip, soda and brewskis
    dacoupedeville - doesn't know on-call work schedule until a few days in advance. Off the hook for food.
    phocion - snacks and brewskis
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • mole'
    mole' Posts: 3,160
    edited October 2010
    cant wait for this. its gonna be fun.


    dont know if its been said already but Thanks Doug for hosting this.
    mole'
    · Share on FacebookShare on Twitter
  • kawizx9r
    kawizx9r Posts: 5,150
    edited October 2010
    mole' wrote: »
    cant wait for this. its gonna be fun.


    dont know if its been said already but Thanks Doug for hosting this.

    x20!

    And mole', still down for Friday (day prior) right? :biggrin:
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
    · Share on FacebookShare on Twitter
  • mole'
    mole' Posts: 3,160
    edited October 2010
    kawizx9r wrote: »
    x20!

    And mole', still down for Friday (day prior) right? :biggrin:

    yes sir.
    mole'
    · Share on FacebookShare on Twitter
  • edoggrc51
    edoggrc51 Posts: 584
    edited October 2010
    Ya, thanks Doug!! :smile:
    Denon 4311ci
    MINIdsp OPEN-DRC
    XPR-5
    LS6 Line Arrays
    LS-C Center Channel
    A/V-1RS Surounds
    Quad DIY LMS Ultra subs (powered by dual IPR-7500 amps)
    Panny AE-8000u
    2:35 110in Screen
    Oppo BDP-103
    Belkin PF60
    Harmony ONE

    2ch: Emotiva Stealth 8's, Airport Express
    · Share on FacebookShare on Twitter
  • Steelo
    Steelo Posts: 69
    edited October 2010
    Yes, thank you doug.....just to show you some appreciation for your hospitality I'll bring some Ice Tea (I think that's what you said you like to drink) & dessert for you.

    Since there are plenty of drinks being brought, I'll bring hot dogs, silverware & napkins.

    Reece
    · Share on FacebookShare on Twitter
  • mole'
    mole' Posts: 3,160
    edited October 2010
    Steelo wrote: »
    Yes, thank you doug.....just to show you some appreciation for your hospitality I'll bring some Ice Tea (I think that's what you said you like to drink) & dessert for you.

    Since there are plenty of drinks being brought, I'll bring hot dogs, silverware & napkins.

    Reece

    what part of SoCal are you in?
    mole'
    · Share on FacebookShare on Twitter
  • Steelo
    Steelo Posts: 69
    edited October 2010
    mole' wrote: »
    what part of SoCal are you in?

    I'm in the OC.
    · Share on FacebookShare on Twitter
  • mole'
    mole' Posts: 3,160
    edited October 2010
    Steelo wrote: »
    I'm in the OC.

    coolio
    mole'
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,068
    edited October 2010
    mole' wrote: »
    cant wait for this. its gonna be fun.


    dont know if its been said already but Thanks Doug for hosting this.

    My pleasure!
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,068
    edited November 2010
    We have another member potentially joining us. blueboxer is back in town and may be able to head down for the meet.
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • kawizx9r
    kawizx9r Posts: 5,150
    edited November 2010
    dpowell wrote: »
    We have another member potentially joining us. blueboxer is back in town and may be able to head down for the meet.

    Awesome :biggrin:

    Headsup in case anyone forgot, my cousin is still set to be coming along. Can't wait! Just 2 weeks to go!
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,068
    edited November 2010
    Does he need a place to crash too?

    My brother and cousin may stop by at some point but won't be here for the entire day.
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • mole'
    mole' Posts: 3,160
    edited November 2010
    just let me know that day a count on the steaks.

    i was planning on rib-eye steaks unless you guys want something else???
    mole'
    · Share on FacebookShare on Twitter
  • mole'
    mole' Posts: 3,160
    edited November 2010
    i have 2 sets of Monitor 10s im not using. i think freddy is gonna take one set, anyone else want a set? ill bring them with me.
    mole'
    · Share on FacebookShare on Twitter
  • kawizx9r
    kawizx9r Posts: 5,150
    edited November 2010
    mole' wrote: »
    i have 2 sets of Monitor 10s im not using. i think freddy is gonna take one set, anyone else want a set? ill bring them with me.

    I'm still set on taking a pair, don't worry :biggrin:

    Figured it'd be a nice way to get back into 2-channel.

    Nice tube integrated or tube pre+tube amp later down the road with them.
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
    · Share on FacebookShare on Twitter
  • mole'
    mole' Posts: 3,160
    edited November 2010
    kawizx9r wrote: »
    I'm still set on taking a pair, don't worry :biggrin:

    Figured it'd be a nice way to get back into 2-channel.

    Nice tube integrated or tube pre+tube amp later down the road with them.

    cool.


    i have 3 sets of extra XOs for them too

    i was gonna mod them but dont have the time or need for them anywhere in my setup at this time
    mole'
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,068
    edited November 2010
    Just keeping this list updated as we had another member cancel due to schedule conflict.

    dpowell - Baked Potatoes
    kawizx9r + cousin - plates/cups
    Mole' - Steaks and drinks
    norm apter - Salad and Dessert
    Steelo
    blueboxer - tentative 'yes'
    Civilian
    edoggrc51 - chips, dip, soda and brewskis
    dacoupedeville - doesn't know on-call work schedule until a few days in advance. Will bring dessert if coming.
    phocion - snacks and brewskis
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter
  • dpowell
    dpowell Posts: 3,068
    edited November 2010
    One more thing. I don't want to leave music/DVD media to chance. If you have SACD's (i.e. PF DSOTM) or others or any other redbook CDs that are good for critical listening, please bring them along.

    Having duplicates helps if we are comparing CDP's.
    ____________________________________________________________

    polkaudio Fully Modded SDA SRS 1.2TLs + Dreadnaught, LSiM706c, 4 X Polk Surrounds + 4 X ATMOS, SVS PB13 Ultra X 2, Pass Labs X1, Marantz 7704, Bob Carver Crimson Beauty 350 Tube Mono Blocks, Carver Sunfire Signature Cinema Grande 400x5, ADCOM GFA 7807, Panasonic UB420, Moon 380D DAC, EPSON Pro Cinema 6050
    · Share on FacebookShare on Twitter