-
External LSiM703 crossover modification
I've learned so much from this forum and this is an attempt to contribute a little back, a few photos follow the lengthy write up. I started planning this project over a year ago and I barely finishe…3 · -
Re: Full-Band Setting
If your speakers and amplification can handle the fronts at full range it should be fine. Just set your subwoofer to kick in where your fronts start to roll off. If you like the results then go with …1 · -
Re: External LSiM703 crossover modification
I'm not much for leaving detailed reviews, so I'll keep it short. After having about 350 hours or so on the crossovers and tweaking speaker placement, I finally had some time to sit down and really l…1 · -
Re: Replacing Mid Range Driver on LSIM705
It shouldn't be too bad, gently peel off the rubber cover surrounding the tweeter/mid-range driver, a plastic spoon may help get it started. Then you should see four screws holding in the MR driver. …1 · -
Re: Best Center Channel match for LSi7's?
The LSi9 has a larger internal volume and the drivers aren't spaced as widely the LSiC. When I went from LSi9 to LSiC as a center channel I noticed that there was a wider horizontal dispersion of the…1 ·