Vintage Monitor and SDA Speaker Deals

Options
1…208209211213214…259

Comments

  • dromunds
    dromunds Posts: 10,174
    Options
    Nice cabs and Peerless tweets and maybe good crossovers for half a hundy? Sounds like a no-brainer.
    · Share on Facebook
  • VSAT88
    VSAT88 Posts: 1,383
    edited February 2021
    Options
    la2vegas wrote: »
    Frankenpolk is alive and well in Los Angeles. https://losangeles.craigslist.org/lac/ele/d/los-angeles-polk-audio-7b-with-peerless/7272991599.html
    ac6lt27syeg6.jpg

    I love them. They would fit right in here. I weep for them. Lol. No kidding though, if I were there I would buy them and fix em right on back up. Put some "Mystery" drivers in there.
    · Share on Facebook
  • la2vegas
    la2vegas Posts: 774
    Options
    I offered him 30 but he didn't bite...
    · Share on Facebook
  • JayMX
    JayMX Posts: 464
    edited February 2021
    Options
    Anybody in the intermountain west following this thread? I just finished up a pair of 3.1TL's, listed locally here in Utah. Could make some arrangements if a fellow polkaholic is in the market and within reasonable distance to meet up. I’m hoping to get $575 for them which is pretty much what I have into them. Holla if'n you’re interested.

    Stuff I’ve done to them:

    - They’ve been aesthetically refreshed, re-stained with India ink and topped with polyacrylic. There are some blemishes from mistreatment in the past, luckily the worst of it is on the backs. Grilles and cabinet cloth is in good condition, no snags or rips, a little schmegma on them that I haven’t tried to clean off yet, but it shows worse in the photo than it is in person.
    - The magnets have all been secured with powergrab to prevent shifting.
    - Noico damping material has been applied to all baskets to reduce ringing.
    - The tweeters were upgraded with RD0-198’s.
    - Terminal cups have all new binding posts and built new jumpers.
    - Drivers and passives are all in great condition and the cabinets are sealed well.
    - Included is a custom 12’ interconnect cable for the SDA circuit.

    Also have listed a CS350-LS in vgc. Perfect working order. $125 obo.

    Some photos in no specific order:
    ms01xxs5rbzd.jpeg
    ewt5c353t4cl.jpeg
    hlzs0p5hvttf.jpeg
    6jf3ddllv4kb.jpeg
    47vs4m1m5xrv.jpeg
    tgvlv4vyd28w.jpeg
    az80jxrr4c6y.jpeg
    k8eq3kkqptu9.jpeg
    38d2x7f3up6p.jpeg
    oeezn6ot1eiv.jpeg
    o93pujpuz9p2.jpeg
    j0mkpp71vwlv.jpeg
    1jkbbj23ce8q.jpeg
    qm27ex1xom86.jpeg
    p8yfaos1s1lp.jpeg
    Current Collection: Monitor 4a (Peerless), Modified Monitor 7b (Peerless), RTA15TL (SL3000), Full mod SDA CRS 4.1TL (198’s), SDA SRS 2.3TL (198’s), R100's, R200’s, R300 🤩
    Pairs that have passed through: Monitor 4b (Peerless), Monitor 5a (Peerless), Monitor 5B (Peerless), Monitor 5b (SL1000), Monitor 5b (SL2000) (4x pair), Monitor 7b (Peerless), Modified Monitor 7c’s (194’s), Monitor 10a (Peerless), Monitor 10b (5x pair), RTA8, RTA8TL, RTA 11T, RTA12c (194's), SDA1(mod to “a” & SL1000 Wuhan mod), SDA CRS, SDA 2 (2x pair), SDA 2a, SDA 2b, SDA 1b, SDA 1c, SDA SRS 2 (2x pair), SDA SRS 3.1TL (198’s) (2x pair)...and more to come, it’s a sickness.
    · Share on Facebook
  • Navy_Goat
    Navy_Goat Posts: 375
    Options
    Seems like a very good deal for the right person. Hard to imagine better sound/money! GLWS!
    SDA SRS 2.3tl, SDA 1C, SDA 2B (TL mod), Reserve 200
    · Share on Facebook
  • CGTIII
    CGTIII Posts: 1,274
    Options
    Polk RT 25i speakers - $75 (Johnson City, TN) Claims perfect. No affiliation.
    https://tricities.craigslist.org/ele/d/johnson-city-polk-rt-25i-speakers/7273771067.html
    Expect that there will be bumps in the road. Choose to not let them rattle you.

    Polk - Monitor 10As, SDA 2Bs, LSi9s, White RTi4s, S4s, M3s, various centers.
    Boston - CR7, CR6s, CR4s.
    Subs - M&K V4, M&K VX-7B, JBL SUB150P, Jamo Sub 250, and others.
    ​Thompson Adventures, Inc.
    · Share on Facebook
  • la2vegas
    la2vegas Posts: 774
    Options
    rkgsmu7fx7mp.jpg
    h25yccuaokjc.jpg
    https://losangeles.craigslist.org/sfv/ele/d/burbank-polk-monitor-7tl-recapped/7280479726.html

    · Share on Facebook
  • la2vegas
    la2vegas Posts: 774
    Options
    https://losangeles.craigslist.org/sfv/ele/d/burbank-polk-31tl-gorgeous/7280481888.html
    effg0m0v7cl8.jpg
    q8xdsubgku8m.jpg

    · Share on Facebook
  • Gardenstater
    Gardenstater Posts: 4,936
    edited February 2021
    Options
    Makes me want to upgrade my spare 7B crossovers as above to make them 7tl's w/ RDO-198's just to see what sort of difference there is compared to Peerless. $650 though? I WISH you could get your labor back in resale value......but heck I'm never selling mine!
    George / NJ

    Polk 7B main speakers, std. mods+ (1979, orig owner)
    Martin Logan Dynamo sub w/6ft 14awg Power Cord
    Onkyo A-8017 integrated
    Logitech Squeezebox Touch Streamer w/EDO applet
    iFi nano iDSD DAC
    iPurifier3
    iDefender w/ iPower PS
    Custom Steve Wilson 1m UPOCC Interconnect
    iFi Mercury 0.5m OFHC continuous cast copper USB cable
    Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14awg, ultra low inductance
    Custom Vibration Isolation Speaker Stands and Sub Platform
    · Share on Facebook
  • invalid
    invalid Posts: 1,559
    Options
    If you are never selling them, why would you worry about getting you labor $ back. Listening pleasure is also worth something.
    · Share on Facebook
  • Gardenstater
    Gardenstater Posts: 4,936
    Options
    Umm yes exactly! Just saying that I don't think they will sell for $650 especially in CA.
    George / NJ

    Polk 7B main speakers, std. mods+ (1979, orig owner)
    Martin Logan Dynamo sub w/6ft 14awg Power Cord
    Onkyo A-8017 integrated
    Logitech Squeezebox Touch Streamer w/EDO applet
    iFi nano iDSD DAC
    iPurifier3
    iDefender w/ iPower PS
    Custom Steve Wilson 1m UPOCC Interconnect
    iFi Mercury 0.5m OFHC continuous cast copper USB cable
    Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14awg, ultra low inductance
    Custom Vibration Isolation Speaker Stands and Sub Platform
    · Share on Facebook
  • invalid
    invalid Posts: 1,559
    Options
    I thought everything was more expensive in california.
    · Share on Facebook
  • Gardenstater
    Gardenstater Posts: 4,936
    edited February 2021
    Options
    I see these vintage Polks go for half the price in CA that I see them sell for in NJ. Probably depends greatly upon the area though. I am not far from NYC and everything is jacked up here.
    George / NJ

    Polk 7B main speakers, std. mods+ (1979, orig owner)
    Martin Logan Dynamo sub w/6ft 14awg Power Cord
    Onkyo A-8017 integrated
    Logitech Squeezebox Touch Streamer w/EDO applet
    iFi nano iDSD DAC
    iPurifier3
    iDefender w/ iPower PS
    Custom Steve Wilson 1m UPOCC Interconnect
    iFi Mercury 0.5m OFHC continuous cast copper USB cable
    Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14awg, ultra low inductance
    Custom Vibration Isolation Speaker Stands and Sub Platform
    · Share on Facebook
  • la2vegas
    la2vegas Posts: 774
    Options
    Gardenstater wrote: »
    I see these vintage Polks go for half the price in CA that I see them sell for in NJ. Probably depends greatly upon the area though. I am not far from NYC and everything is jacked up here.

    I've bought 4 pairs of 7's over the last 5 years. All of them have been for 30 dollars or less. One pair had peerless tweeters while another had the sl2500.

    Vintage Polks do seem to run considerably cheaper out here in California in comparison to other states for some reason.
    · Share on Facebook
  • xschop
    xschop Posts: 5,830
    edited February 2021
    Options
    la2vegas wrote: »
    Gardenstater wrote: »
    I see these vintage Polks go for half the price in CA that I see them sell for in NJ. Probably depends greatly upon the area though. I am not far from NYC and everything is jacked up here.

    I've bought 4 pairs of 7's over the last 5 years. All of them have been for 30 dollars or less. One pair had peerless tweeters while another had the sl2500.

    Vintage Polks do seem to run considerably cheaper out here in California in comparison to other states for some reason.

    At those prices, they are experiments waiting to happen lol. The 7's can afford some interior bracing mods.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • tonyp063
    tonyp063 Posts: 1,157
    Options
    Model 7s in Baltimore. $100


    00D0D_f5SDPo3ctoPz_07K0ak_600x450.jpg



    https://baltimore.craigslist.org/ele/d/baltimore-polk-audio-model-7a/7276395677.html
    · Share on Facebook
  • jdjohn
    jdjohn Posts: 3,443
    Options
    RTA-12 just north of Nashville for $250
    2yzgtmgj3nl4.png
    xnx2l7uqki9x.png
    https://nashville.craigslist.org/ele/d/hendersonville-polk-audio-rta-12/7264337465.html
    "This may not matter to you, but it does to me for various reasons, many of them illogical or irrational, but the vinyl hobby is not really logical or rational..." - member on Vinyl Engine
    "Sometimes I do what I want to do. The rest of the time, I do what I have to." - Cicero, in Gladiator
    Regarding collectibles: "It's not who gets it. It's who gets stuck with it." - Jimmy Fallon
    · Share on Facebook
  • Gardenstater
    Gardenstater Posts: 4,936
    Options
    tonyp063 wrote: »
    Model 7s in Baltimore. $100


    00D0D_f5SDPo3ctoPz_07K0ak_600x450.jpg



    https://baltimore.craigslist.org/ele/d/baltimore-polk-audio-model-7a/7276395677.html

    Looks like there is not a hole in that Peerless dome. Maybe Polk didn't do that early on.
    George / NJ

    Polk 7B main speakers, std. mods+ (1979, orig owner)
    Martin Logan Dynamo sub w/6ft 14awg Power Cord
    Onkyo A-8017 integrated
    Logitech Squeezebox Touch Streamer w/EDO applet
    iFi nano iDSD DAC
    iPurifier3
    iDefender w/ iPower PS
    Custom Steve Wilson 1m UPOCC Interconnect
    iFi Mercury 0.5m OFHC continuous cast copper USB cable
    Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14awg, ultra low inductance
    Custom Vibration Isolation Speaker Stands and Sub Platform
    · Share on Facebook
  • alexanikin
    alexanikin Posts: 106
    edited February 2021
    Options
    RTA 11T in Bay Area - $300
    61qfi290py45.jpg

    https://sfbay.craigslist.org/pen/ele/d/brisbane-polk-audio-monitor-series-11t/7282803809.html
    · Share on Facebook
  • alexanikin
    alexanikin Posts: 106
    Options
    Single Polk Monitor 5a in a pretty decent condition - $25 (Walnut Creek)
    I was thinking to get it, but there is nothing in my mind to convince in driving for about 40mls.
    2ax7xcblt66k.jpg

    https://sfbay.craigslist.org/eby/ele/d/walnut-creek-polk-monitor-5a-speaker/7281344786.html
    · Share on Facebook
  • dromunds
    dromunds Posts: 10,174
    Options
    That’s a Peerless 5. Good deal for $25, some guys like them for center channel if they have Peerless monitor fronts.
    · Share on Facebook
  • JayMX
    JayMX Posts: 464
    Options
    It’s raining monitor 7’s here in Utah. I already have two spare pairs, so yeah... somebody else can chase them... 😂
    g94ngbd6o608.jpeg
    https://classifieds.ksl.com/listing/63014080

    I didn’t jump on these and now they’re gone. They were asking $130 for them:
    2zle7k4z635e.jpeg
    Current Collection: Monitor 4a (Peerless), Modified Monitor 7b (Peerless), RTA15TL (SL3000), Full mod SDA CRS 4.1TL (198’s), SDA SRS 2.3TL (198’s), R100's, R200’s, R300 🤩
    Pairs that have passed through: Monitor 4b (Peerless), Monitor 5a (Peerless), Monitor 5B (Peerless), Monitor 5b (SL1000), Monitor 5b (SL2000) (4x pair), Monitor 7b (Peerless), Modified Monitor 7c’s (194’s), Monitor 10a (Peerless), Monitor 10b (5x pair), RTA8, RTA8TL, RTA 11T, RTA12c (194's), SDA1(mod to “a” & SL1000 Wuhan mod), SDA CRS, SDA 2 (2x pair), SDA 2a, SDA 2b, SDA 1b, SDA 1c, SDA SRS 2 (2x pair), SDA SRS 3.1TL (198’s) (2x pair)...and more to come, it’s a sickness.
    · Share on Facebook
  • VSAT88
    VSAT88 Posts: 1,383
    Options
    I do not recall ever seeing a set with the Polk logo down low like that with the wood on the bottom. That looks cool.
    · Share on Facebook
  • Mystery
    Mystery Posts: 2,546
    Options
    la2vegas wrote: »
    https://losangeles.craigslist.org/sfv/ele/d/burbank-polk-monitor-7tl-recapped/7280479726.html

    Dang!
    That's going into used Sonus Faber territory.

    Klipsch RB81, KG3.5, B&W DM602.5, Polk.
    Subwoofers: Klipsch RW10, Triad ProSub Bronze.
    · Share on Facebook
  • jonicont
    jonicont Posts: 283
    Options
    Monitor 12. Charlotte. No afil. $450. https://charlotte.craigslist.org/ele/d/matthews-polk-audio-speakers/7283720212.html
    DynaudIo Evoke 30, VPI Prime, Soundsmith Zephyr MKIII, PS audio Stellar phono pre, McCormack DNA 0.5 Gold, ARC LS-17se, Eversolo dmp A8, MIT AVT MA ic’s and speaker cables, ps audio stellar power plant 3
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • Tony M
    Tony M Posts: 12,015
    Options
    pitdogg2 wrote: »
    jonicont wrote: »
    Monitor 12. Charlotte. No afil. $450. https://charlotte.craigslist.org/ele/d/matthews-polk-audio-speakers/7283720212.html

    I'd love to hear a pair. One of my only Polks to escape my hearing.

    Pretty much the same here. :)
    Most people just listen to music and watch movies. I EXPERIENCE them.

    “Anger is an acid that can do more harm to the vessel in which it is stored than to anything on which it is poured.”
    --Mark Twain.

    “If at first you don't succeed, then skydiving definitely isn't for you.” - Steven Wright
    · Share on Facebook
  • VSAT88
    VSAT88 Posts: 1,383
    Options
    RD tweeters looks like too. Bet they sound real nice.
    · Share on Facebook
  • la2vegas
    la2vegas Posts: 774
    Options
    Polk SRS original owner, no affiliation. na912lmyrdla.jpg
    https://modesto.craigslist.org/ele/d/ripon-polk-sda-speaker-towers/7283844027.html

    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.