Vintage Monitor and SDA Speaker Deals

Options
1…148149151153154…259

Comments

  • FestYboy
    FestYboy Posts: 3,861
    Options
    Why so far away!? :'(
  • Mike Reeter
    Options
    Nhpenn wrote: »
    A pair of monitor 12s, but they don't appear to be in great shape

    https://www.shopgoodwill.com/Item/57366838

    Do the Monitor 12's use the same PR as the 3.1TL's?

  • This content has been removed.
  • Mike Reeter
    Options
    pitdogg2 wrote: »
    Nhpenn wrote: »
    A pair of monitor 12s, but they don't appear to be in great shape

    https://www.shopgoodwill.com/Item/57366838

    Do the Monitor 12's use the same PR as the 3.1TL's?

    Very similar, i can't say it is exactly one and the same.
    But yes of the same style.

    Yeah, I need to look up the specs on the Mon 12's. "If" they are the same PR, might be a way to come up with a couple of spares, the 3.1 PR's are SCARCE :#
  • FestYboy
    FestYboy Posts: 3,861
    Options
    You leave those poor M12s alone! :'(
    They're harder to find than the 3.1s
  • This content has been removed.
  • kmeek
    kmeek Posts: 225
    Options
    I don't know how I missed these on Offerup. No affiliation.

    CRS's I think they are Pin/Blade. In the pictures they look really rough. I already know he doesn't have grills or interconnect cable..... But Heck even if the cabinets are bad the drivers and cross-overs are at least worth $25.00. Will be heading over soon.

    sskgptjkowf3.jpg

    e4ytko20b3ec.jpg

    krb88edryhic.jpg


  • krazypolk
    Options
    Did you get them?
  • kmeek
    kmeek Posts: 225
    edited September 2018
    Options
    krazypolk wrote: »
    Did you get them?

    Yes! Long story short: I went straight from work (ie no equipment to hook speakers to). The guy assured me that the drivers worked fine.

    These poor things have had a hard life.... Smell like cigarette smoke, the cabinets are in rough shape, corners are pulling apart (I think water damage see pics), couple of chunks out of the other corners (probably from being dropped on them), no grills, no lower trim pieces (see dowel holes in pic), and of course no interconnect cable. I got home and hooked them up and one of the SL2000's is blown. He told me to let him know if there were any issues. Luckily he was close and responded back right away. Told him since all the drivers didn't work I could return them for my money or for parts I'd do half what he was originally asking. So I got them for $12.00.

    Well they are black cabinet CRS+ (single Tweeter) with Pin/Blade. Don't know if they are Circa 1987 or 1989 without pulling the stereo mid drivers and seeing if they are 6503's or a 6510's.

    Anyone know by the serial numbers? 9472 and 9560?

    Here are some pics:

    5ykguxu1o86a.jpg

    dm097trp5yjd.jpg

    a6nfpd3ia009.jpg

    upzh4c3zis32.jpg

    3nllm3z7k5md.jpg

    z5zvakb0j1fb.jpg

    mebl1ncm7sba.jpg


  • krazypolk
    Options
    Man, those are the toughest I've seen. Nothing left to do but part them out. RIP.
  • kmeek
    kmeek Posts: 225
    Options
    By the way guys those M12's I mentioned a few weeks back on Tucson's Craigslist that were at $290.00.
    The guy still hasn't sold them and he's down to $200.00 obo....

    https://tucson.craigslist.org/ele/6675399530.html

    jqpzbgprhw5b.jpg

    s06qntu3elos.jpg


  • krazypolk
    Options
    kmeek wrote: »
    By the way guys those M12's I mentioned a few weeks back on Tucson's Craigslist that were at $290.00.
    The guy still hasn't sold them and he's down to $200.00 obo....

    https://tucson.craigslist.org/ele/6675399530.html

    jqpzbgprhw5b.jpg

    s06qntu3elos.jpg


    The price is moving in the right direction. Getting warmer.
  • kmeek
    kmeek Posts: 225
    Options
    krazypolk wrote: »
    Man, those are the toughest I've seen. Nothing left to do but part them out. RIP.

    Yep! They had a hard life. Figured when I find that nice pair I now have some backup drivers/cross-overs. $12 wouldn't buy me one of the drivers let alone all of them (minus one blown Tweeter)......
  • kmeek
    kmeek Posts: 225
    Options
    krazypolk wrote: »
    kmeek wrote: »
    By the way guys those M12's I mentioned a few weeks back on Tucson's Craigslist that were at $290.00.
    The guy still hasn't sold them and he's down to $200.00 obo....

    https://tucson.craigslist.org/ele/6675399530.html

    jqpzbgprhw5b.jpg

    s06qntu3elos.jpg


    The price is moving in the right direction. Getting warmer.

    Way warmer..... ;)
  • codycatalist
    Options
    kmeek wrote: »
    krazypolk wrote: »
    Man, those are the toughest I've seen. Nothing left to do but part them out. RIP.

    Yep! They had a hard life. Figured when I find that nice pair I now have some backup drivers/cross-overs. $12 wouldn't buy me one of the drivers let alone all of them (minus one blown Tweeter)......

    Lucky dog. I stopped frequenting offer up as I mostly saw older posts in our area. Now I have competition...damn you! Ima go listen to my 2Bs and try to forget this post.
    Just a dude doing dude-ly things

    "Temptation is the manifestation of desire which equals necessity." - Mikey081057
    " I have always had a champange taste with a beer budget" - Rick88
    "Just because the thread is getting views don't mean much .. I like a good train wreck doesn't mean i want to be in one..." - pitdogg2
    "Those that don't know, don't know that they don't know." - heiney9
    "Audiophiles are the male equivalent of cat ladies." - Audiokarma Member
  • kmeek
    kmeek Posts: 225
    Options
    kmeek wrote: »
    krazypolk wrote: »
    Man, those are the toughest I've seen. Nothing left to do but part them out. RIP.

    Yep! They had a hard life. Figured when I find that nice pair I now have some backup drivers/cross-overs. $12 wouldn't buy me one of the drivers let alone all of them (minus one blown Tweeter)......

    Lucky dog. I stopped frequenting offer up as I mostly saw older posts in our area. Now I have competition...damn you! Ima go listen to my 2Bs and try to forget this post.

    Sorry about that....
    All I know is Offerup seems a lot more iffy at times than Craigslist but those few times are something!!!

    What side of town are you in??
  • kmeek
    kmeek Posts: 225
    Options
    But now that I got the pair of Frankenstein CRS+'s that need to be put out of there misery. I now see what they are all about and I am chomping at the bit to get a nice pair........ :#
  • codycatalist
    Options
    kmeek wrote: »
    kmeek wrote: »
    krazypolk wrote: »
    Man, those are the toughest I've seen. Nothing left to do but part them out. RIP.

    Yep! They had a hard life. Figured when I find that nice pair I now have some backup drivers/cross-overs. $12 wouldn't buy me one of the drivers let alone all of them (minus one blown Tweeter)......

    Lucky dog. I stopped frequenting offer up as I mostly saw older posts in our area. Now I have competition...damn you! Ima go listen to my 2Bs and try to forget this post.

    Sorry about that....
    All I know is Offerup seems a lot more iffy at times than Craigslist but those few times are something!!!

    What side of town are you in??

    East Mesa. Have lived all over the city though, it’s quieter over here. What about yourself?
    Just a dude doing dude-ly things

    "Temptation is the manifestation of desire which equals necessity." - Mikey081057
    " I have always had a champange taste with a beer budget" - Rick88
    "Just because the thread is getting views don't mean much .. I like a good train wreck doesn't mean i want to be in one..." - pitdogg2
    "Those that don't know, don't know that they don't know." - heiney9
    "Audiophiles are the male equivalent of cat ladies." - Audiokarma Member
  • kmeek
    kmeek Posts: 225
    Options
    Over not to far from the Cardinals stadium on the west side of town.
    Seems like everytime I do find something especially on Craigslist it's always in East Mesa, Apache Junction, Queen Creek, or San Tan Valley...... :s
  • krazypolk
    Options
    I lived in Tolleson for a minute. Slim pickings there.
  • codycatalist
    Options
    kmeek wrote: »
    Over not to far from the Cardinals stadium on the west side of town.
    Seems like everytime I do find something especially on Craigslist it's always in East Mesa, Apache Junction, Queen Creek, or San Tan Valley...... :s

    Sounds about right. West side just isn’t super reliable for audio stuff unless we are talking cars. If you ever find yourself on this side of town again just pm me and I’ll have you over to listen for a bit.

    Tolleson...yeah although it has grown in the last couple years to be a little higher income in some areas. Still most of the stuff is gonna be around the old folks.
    Just a dude doing dude-ly things

    "Temptation is the manifestation of desire which equals necessity." - Mikey081057
    " I have always had a champange taste with a beer budget" - Rick88
    "Just because the thread is getting views don't mean much .. I like a good train wreck doesn't mean i want to be in one..." - pitdogg2
    "Those that don't know, don't know that they don't know." - heiney9
    "Audiophiles are the male equivalent of cat ladies." - Audiokarma Member
  • kmeek
    kmeek Posts: 225
    Options
    @codycatalist, Sounds good! Will do.....
  • Clipdat
    Clipdat Posts: 13,104
    edited September 2018
    Options
    "Open box never used" interesting

    https://offerup.com/item/detail/539446623/

    6bc3573380dd49a7a44e6b69d6a23d61.jpg
  • Clipdat
    Clipdat Posts: 13,104
    Options
  • This content has been removed.
  • krazypolk
    Options
    kmeek wrote: »
    krazypolk wrote: »
    Man, those are the toughest I've seen. Nothing left to do but part them out. RIP.

    Yep! They had a hard life. Figured when I find that nice pair I now have some backup drivers/cross-overs. $12 wouldn't buy me one of the drivers let alone all of them (minus one blown Tweeter)......

    Late to the party on these, but I double dog dare you to restore them. >:)

    It would be easier to find a good condition pair for a couple a hundred bucks, than have to basically build some cabinets from scratch. Even Dr Frankenstein would run away from those.
  • This content has been removed.
  • This content has been removed.
  • kmeek
    kmeek Posts: 225
    edited September 2018
    Options
    kmeek wrote: »
    krazypolk wrote: »
    Man, those are the toughest I've seen. Nothing left to do but part them out. RIP.

    Yep! They had a hard life. Figured when I find that nice pair I now have some backup drivers/cross-overs. $12 wouldn't buy me one of the drivers let alone all of them (minus one blown Tweeter)......

    Late to the party on these, but I double dog dare you to restore them. >:)

    Wow! Just had a Six Million Dollar Man flashback....... "We can rebuild him"

    Double dog Dare eh? Well I do have a co-worker who's hobbie is cabinetry. Already been envisioning ebonying a nice oak cabinet for these.....................maybe. :o

    Just concerned about the drivers.... The more I looked them over on the outside they almost look like they were at one point stored maybe with their fronts facing down and got water damage that way. Not sure how to tell if the cones, spiders or voice coils have been compromised by any water. They look alright from the front. When I have time I will remove them and inspect more thoroughly......
  • krazypolk
    Options
    pitdogg2 wrote: »
    Clipdat wrote: »

    Those are worth the asking price in my opinion

    Would these benefit from upgraded tweets?