Vinyl Death Grip!!!

Options
13567

Comments

  • Toolfan66
    Toolfan66
    Options
    t6oz2awra1g5.jpg

    The last part is being a pain...
    · Share on Facebook
  • agfrost
    agfrost
    Options
    Maybe avoid tightening with a 3' pipe wrench elongated with a 10' cheater bar...

    (ouch)
    Jay
    SDA 2BTL * McCormack DNA 0.5 amp * Oppo BDP-93 * Modded Adcom GDA-600 DAC * Rythmik F8 (x2)
    Micro Seiki DQ-50 * Mitsubishi LT-30 * Hagerman Cornet 2 Phono
    Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
    · Share on Facebook
  • motorhead43026
    motorhead43026
    Options
    Tighten until it turns freely, then tighten an additional 1/4 turn.
    Since we don’t know where we are going we have to stick together in case someone gets there….Ken Kesey

    Idolizing a politician is like believing the stripper REALLY likes you.
    · Share on Facebook
  • BlueMDPicker
    BlueMDPicker
    Options
    How did it bend/contort so badly? :o

    Sorry you're having mechanical issues.
    · Share on Facebook
  • ken brydson
    ken brydson
    Options
    Toolfan66 wrote: »
    t6oz2awra1g5.jpg

    The last part is being a pain...

    PFB in the house?
    · Share on Facebook
  • mhardy6647
    mhardy6647
    Options
    ken brydson wrote: »
    Toolfan66 wrote: »
    t6oz2awra1g5.jpg

    The last part is being a pain...

    PFB in the house?

    Avatar + Signature material right there
    · Share on Facebook
  • pitdogg2
    pitdogg2
    Options
    My guess Larry was machining and it got wonky quick like.
    · Share on Facebook
  • dkg999
    dkg999
    Options
    With the judicious use of heat and hydraulic pressure that will straighten right up :)
    DKG999
    HT System: LSi9, LSiCx2, LSiFX, LSi7, SVS 20-39 PC+, B&K 507.s2 AVR, B&K Ref 125.2, Tripplite LCR-2400, Cambridge 650BD, Signal Cable PC/SC, BJC IC, Samsung 55" LED

    Music System: Magnepan 1.6QR, SVS SB12+, ARC pre, Parasound HCA1500 vertically bi-amped, Jolida CDP, Pro-Ject RM5.1SE TT, Pro-Ject TubeBox SE phono pre, SBT, PS Audio DLIII DAC
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    q13fqap1wj6s.jpg

    Yeah, our guys came through!!!
    · Share on Facebook
  • scubalab
    scubalab
    Options
    Looks like the first production run is limited to 18? ;)
    · Share on Facebook
  • pitdogg2
    pitdogg2
    Options
    17 Larry gets a freebie
    · Share on Facebook
  • dromunds
    dromunds
    Options
    Awesome! (Says guy who called "dibs" one month ago). o:)
    · Share on Facebook
  • Toolfan66
    Toolfan66
    edited September 2017
    Options
    B)
    · Share on Facebook
  • gimpod
    gimpod
    Options
    Toolfan66 wrote: »
    t6oz2awra1g5.jpg

    The last part is being a pain...

    Yes tighten 1/4 turn before breaking! (From an old Harley Davidson repair manual) :)
    “The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain
    · Share on Facebook
  • dkfreebird
    dkfreebird
    Options
    I believe that was the instruction on my 73 Sporsters clutch adjustment.
    2 Channel
    Polk 1.2tl's Modded with dreadnought
    Musical Fidelity M6Si
    North Star Intenso Dac
    Auralic Aries Mini Streamer
    Oppo 103
    Pangea PC
    Wireworld Equinox 7 interconnects
    Wireworld Equinox 7 Speaker Cables and Jumpers

    Backups 2.3tl, Crs+ pin/blade with stands.Monitor 5&7 peerless,Polk R200,Usher CP6311.McCormack Dna 0.5 Deluxe McCormack Dna 1,Dared Sl 2000A,Dayens Ampino,Rogue Magnum 66 pre
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    So I'm having a difficult time finding the rubber piece for the inside of the clamp, I know it doesn't have to be exactly the same for what it does but I would at least like something close..

    Anyone have any ideas I'm all ears.. :)
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    ey4cqwk80gcy.jpg
    · Share on Facebook
  • F1nut
    F1nut
    Options
    Goodyear?
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on Facebook
  • FestYboy
    FestYboy
    Options
    Where does it sit and what exactly is it's function? I have a resource or 2 that might get you where you want to be.
    · Share on Facebook
  • vmaxer
    vmaxer
    Options
    Pretty sure the clamp used Sorbothane, may be hard to find in that form??
    Pio Elete Pro 520
    Panamax 5400-EX
    Sunfire TGP 5
    Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
    PS Audio GCPH phono pre
    Sunfire CG 200 X 5
    Sunfire CG Sig 405 X 5
    OPPO BDP-83 SE
    SDA SRS 1.2TL Sonicaps and Mills
    Ctr CS1000p
    Sur - FX1000 x 4
    SUB - SVS PB2-Plus

    Workkout room:
    Sony Bravia XBR- 32-Inch 1080p
    Onkyo TX-DS898
    GFA 555
    Yamaha DVD-S1800BL/SACD
    Ft - SDA 1C

    Not being used:
    RTi 38's -4
    RT55i's - 2
    RT25i's -2, using other 2 in shop
    LSI 15's
    CSi40
    PSW 404
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    It really works as a spring, as you loosen the clamp it helps open the collet..
    · Share on Facebook
  • vmaxer
    vmaxer
    Options

    Discussed on this document.

    jupjfqxx00v6.png
    Pio Elete Pro 520
    Panamax 5400-EX
    Sunfire TGP 5
    Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
    PS Audio GCPH phono pre
    Sunfire CG 200 X 5
    Sunfire CG Sig 405 X 5
    OPPO BDP-83 SE
    SDA SRS 1.2TL Sonicaps and Mills
    Ctr CS1000p
    Sur - FX1000 x 4
    SUB - SVS PB2-Plus

    Workkout room:
    Sony Bravia XBR- 32-Inch 1080p
    Onkyo TX-DS898
    GFA 555
    Yamaha DVD-S1800BL/SACD
    Ft - SDA 1C

    Not being used:
    RTi 38's -4
    RT55i's - 2
    RT25i's -2, using other 2 in shop
    LSI 15's
    CSi40
    PSW 404
    · Share on Facebook
  • FestYboy
    FestYboy
    Options
    Ok so you need a high durometer low surface friction piece... How much compression are you typically seeing?
    · Share on Facebook
  • vmaxer
    vmaxer
    Options
    There are other materials that dampen also, silicones do well. Not sure how it compares though??
    Pio Elete Pro 520
    Panamax 5400-EX
    Sunfire TGP 5
    Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
    PS Audio GCPH phono pre
    Sunfire CG 200 X 5
    Sunfire CG Sig 405 X 5
    OPPO BDP-83 SE
    SDA SRS 1.2TL Sonicaps and Mills
    Ctr CS1000p
    Sur - FX1000 x 4
    SUB - SVS PB2-Plus

    Workkout room:
    Sony Bravia XBR- 32-Inch 1080p
    Onkyo TX-DS898
    GFA 555
    Yamaha DVD-S1800BL/SACD
    Ft - SDA 1C

    Not being used:
    RTi 38's -4
    RT55i's - 2
    RT25i's -2, using other 2 in shop
    LSI 15's
    CSi40
    PSW 404
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    FestYboy wrote: »
    Ok so you need a high durometer low surface friction piece... How much compression are you typically seeing?

    I would say about 0.060 to 0.090 its really hard to tell with the piece inside the clamp..

    The piece is 1.000 in length..

    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • FestYboy
    FestYboy
    Options
    Ok in that case, I'd recommend a large (thick) undersized O ring supported by a nylon collar. The ring will act like a spring with low friction. A square O ring will be more aggressive but harder to source.
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    j3f23tf1bh7s.jpg
    · Share on Facebook
  • Toolfan66
    Toolfan66
    Options
    Accurate Gasket hooked me up..
    · Share on Facebook
  • FestYboy
    FestYboy
    Options
    Well then that's a win... And I still want to know where to send the monies.
    · Share on Facebook