A slightly different take on the Dreadnought
Comments
-
Those parts will work perfectly, just add the ward ware to month them.Home Theater
Onkyo PR-SC5508 Sharp LC-70LE847U
Emotiva XPA-5 Emotiva XPA-2 Emotiva UPA-2
Front RTi-A9 Wide RTi-A7 Center CSi-A6 Surround FXi-A6 Rear RTi-A3 Sub 2x PSW505
Sony BDP-S790 Dishnetwork Hopper/Joey Logitech Harmony One Apple TV
Two Channel
Oppo 105D BAT VK-500 w/BatPack SDA SRS 2.3 Dreadnought Squeezebox Touch Apple TV -
I'm guessing you typed that from your cell phone! I take it you meant "hardware to mount them."
Good music, a good source, and good power can make SDA's sing. Tubes make them dance. -
Ok so in that case, what I need is 2 each of:
http://www.parts-express.com/neutrik-nl2fx-speakon-connector-2-pole-cable-mount--092-198
http://www.parts-express.com/neutrik-nl2mp-speakon-connector-2-pole-panel-mount--092-059
http://www.parts-express.com/neutrik-scdp-0-sealing-gasket-for-d-size-connectors-black--092-094
Correct?
The 4 pole versions are superior, they are built better and have a higher current rating. Why aren't you doing both ends?Do the chassis connectors include the screws I'll need?
No, you will need M3 (metric) screws, nuts and lock washers for the panel mount. Fastnel carries them in stainless steel. They are cheap and there's no minimum order.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Those parts will work perfectly, just add the ward ware to month them.I'm guessing you typed that from your cell phone! I take it you meant "hardware to mount them."
Sometimes "smart" phones are pretty stupid.
Lumin X1 file player, Westminster Labs interconnect cable
Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
Magico S5 MKII Mcast Rose speakers; SPOD spikes
Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
Shunyata Sigma XLR analog ICs, Sigma speaker cables
Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables
Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
Three 20 amp circuits. -
The 4 pole versions are superior, they are built better and have a higher current rating. Why aren't you doing both ends?
Ok, I will grab the 4-pole versions. Thanks for the tip. Not doing both ends because the Dreadnaught is already built with binding posts - using Speakons on the Dreadnaught side would mean drilling holes large enough to accommodate them, when the chassis already has holes drilled for the 4 binding posts. On the Dreadnaught side, I'm using bananas, which works just fine. I think the big advantage of using the Speakon connector will be on the speaker side, so I can eliminate the need for the spade.Good music, a good source, and good power can make SDA's sing. Tubes make them dance. -
No, you will need M3 (metric) screws, nuts and lock washers for the panel mount. Fastnel carries them in stainless steel. They are cheap and there's no minimum order.
Ok great, thank you!Good music, a good source, and good power can make SDA's sing. Tubes make them dance. -
Thanks again Jesse, ordered the 4-pole versions - NL4FX and NL4MP, along with the SCDP gaskets from Parts Express.
I'm thinking these are what I need for the fasteners?
http://www.fastenal.com/web/products/details/40924
http://www.fastenal.com/web/products/details/40247
http://www.fastenal.com/web/products/details/40142Good music, a good source, and good power can make SDA's sing. Tubes make them dance. -
Trey,
Do you have more of the round 4-bp/1-speakon-hole plates like in your pic above (for 1.2's)? I need a pair, but didn't see them listed on your site. Scratch'n'dent is okay as well, if available.
Thanks,
CraigBeach Study: ProJect Stream Box Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT 40-1354Town Study: Elekit TU-8600S * Zu Omen DW * Shunyata Hydra 2 * MIT S3 Beach Cave: Schiit Yggy * Belles 20a * Pass Aleph 30 * Polk SRS 2.3tl * PSAudio PP3 * MIT S3 Beach Den: Dayens Menuetto * Polk R200 / Dynaudio Audience 30 / Usher V-601Town Den: PS Audio DSJr * Joule-Electra LA-100mkiii * Schiit Aegir / Pass F5 Clone * Polk SRS 1.2 * PSA Dectet * MIT S3 -
I'm thinking these are what I need for the fasteners?
Those screws are too short.
Using the SKU's
XM2510016A20000
MN2510000A20000
ML6330000A20000Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
I have them available. They are new stock too
Contact through the forum is very spotty for me. [email protected]
Talk to you soon! - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit. -
An update on this thread. My Dreadnought sits on carpet and always leaned a little bit. Well, I finally got around to doing something about it by adding aluminum outriggers with stainless steel spikes. It now sits perfectly level. The cap nuts are temporary, I have stainless steel knurled knobs arriving Monday.
Post edited by F1nut onPolitical Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
The "Finishing Touch" looks good Jesse!SDA SRS 3.1TL's/SDA CRS+4.1TL's and some other stuff
-
Dang, Dog
You never stop improving ...Nice work!Power Rogue M180 monos & Adcom GFA 5802
PS Audio PerfectWave Power Plant 10
Rears Salk SuperCharged Surrounds
Source PSA PWT into NSD Supremo
Pre/Pro Integra DHC 40.1
LCD Samsung LN46B750
Mains Salk HT2-TL
Center Salk HT2C
Pre Cary SLP-05
Wires WW & MIT -
An update on this thread. My Dreadnought sits on carpet and always leaned a little bit. Well, I finally got around to doing something about it by adding aluminum outriggers with stainless steel spikes. It now sits perfectly level. The cap nuts are temporary, I have stainless steel knurled knobs arriving Monday.
You wouldn't by any chance have an extra one of these laying around, would you?The Gear... Carver "Statement" Mono-blocks, Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 380d DSDIn retirement...TriangleArt Reference SE with Walker Precision Motor Drive, Yamaha CD-S2100 SACD Player.“Every record has been destroyed or falsified, every book has been rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered…History has stopped. Nothing exists except the endless present in which the party is always right” — George Orwell“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.” -
So this is the thread where the idea for Speakon connectors for the SDA cable originated. I should have known Jessie was the originator. I also like the outriggers.
I am glad you updated the thread as I had not read it.
Harry / Marietta GA
-
That going to look killer with the stainless steel knurled knobs and as usual very nice job Jesse.
Hey @F1nut I even speeled your name right this time.
“The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain -
nooshinjohn wrote: »
You wouldn't by any chance have an extra one of these laying around, would you?
Sorry John, I don't.
Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
The stainless steel knurled knobs came in. They were a bit too natural, so I polished them.
Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Glad you got you're.....................knobs polished Jesse
Looks great.Home Theater/2 Channel:
Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
Interconnect: Furez 10/2 with SpeakONs
ICs: Custom Furez by Douglas Connections
Den:
Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
Carver CT-3 Pre, Carver C-500
dhsspeakerservice.com/ -
Looks fantastic!!
-
Looks great!Mojo Audio Illuminati v3>>Quantum Byte w/LMS>>Rpi/PiCoreplayer>> Starlight 7 USB >> Mojo Audio Mystique v2 SE>>ModWright SWL 9.0 SE Signature>>Hafler DH-500 Amp+ (Musical Concepts Fully Modded)>>
SRS 2.3TL (Fully Modded)...Velodyne Optimum 8 subwoofer
1KVA Dreadnought
Marantz SA 8005
Pioneer PLX-1000 Turntable - Shure SC35C/N35X - V15III/VN35HE
Yamaha TX-540 Tuner...Sony BDP-S570
Sony PS4
Separate subpanel with four dedicated 20 amp circuits.
1. Amplification 2. Analog 3. Digital 4. Video
"All THAT IS LOST FROM THE SOURCE IS LOST FOREVER" -
Fantastic work as usual. I'm skeptical about those old, old, speakers being worth the effort though. Proud and loyal citizen of the Digital Domain and Solid State Country!
-
I realized I made a mistake in my OP that needs to be corrected. The socket I used is the NL4MP-UC not the BAG version.
This is the one, http://www.neutrik.com/en/speakon/speakon-chassis-connectors/nl4mp-ucPolitical Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Good, I got the right one.
-
Thread started 6 years ago?? Holy Crap were getting old...
