2 Channel
Polk 1.2tl's Fully modded with dreadnought
Rogue Atlas Magnum
Rogue Magnum 66
North Star Intenso Dac
Auralic Aries Mini Streamer
Marantz UD 7007
Pangea PC
Wireworld Equinox 7 interconnects
Wireworld Equinox 7 Speaker Cables and Jumpers
Home theater
Marantz SR 5009-B&W Cdm1nt, Cdm Center Channel
Backups Polk Monitor 5 peerless,2.3tl,SRS2 pin/blade,Polk Crs+ pin/blade with stands.McCormack Dna 0.5 Deluxe,Dared Sl 2000A,Dayens Ampino
Is this one of those sales that if i ask the price i can't afford it? Just curious to know, thanks.
Herakles.
POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
PIONEER PL-510A SONY BDP S5100
POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1
Thanks polkieman! Not bad i can afford that. Well id like to get on a list if their is one, i know i am new so their are probably people way agead of me. But someone please inbox me or whatever tomgive me heads up next time around!
It's good for people to express their interest here. Larry (Toolfan66) makes runs of these when a) There's enough interest shown and b) both his shop and he have the time to allow for a run.
I have a few sets but haven't had the time to install them. Sometimes I wonder if I don't have too many "projects" in my life!!!????
Take my advice on this: If you live in even a semi-humid climate, tape up the tapped inserts and hit the rings with a coat of spray paint. I had a set made for RTA 11TLs that I never got around to mounting, and they developed a light coat of rust on the ring portion that I let Dan (EnderShadow) sand off before he mounted to his RTA's.
The (2, 3 years old?) RTA rings:
I painted my rings before installing in my SDA 2BTL:
With speakers coming (and not going yet!) I know I could use at least 1 more set of Rings. I had targeted H-Nuts for my SDA2 pairs ... but if Larry makes another run in the near future, I'd go with the rings.
Guys....some advice. Do not push Larry, he'll get to them when he can and saying PLEASE would likely go a long way.
Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
Guys....some advice. Do not push Larry, he'll get to them when he can and saying PLEASE would likely go a long way.
Agreed... And also when they show up.... buy all you think you might EVER need..... because that way you've got em.
And they are a easy sell if you end up not needing them.
"....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
Guys....some advice. Do not push Larry, he'll get to them when he can and saying PLEASE would likely go a long way.
Agreed... Makes me wish the mods would close this thread already. I started it for what was supposed to be the last run of these rings but the thread has an unintended life all its own.
The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Diamond v2 cartridge and Origin Conquerer Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Krell Evolution 505 SACD Player, Pioneer Elite SC-LX701, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB800 "in-wall" surrounds.
I swear by my life and my love of it that I will never live for the sake of another man, nor ask another man to live for mine.” .
“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
Guys....some advice. Do not push Larry, he'll get to them when he can and saying PLEASE would likely go a long way.
Agreed... Makes me wish the mods would close this thread already. I started it for what was supposed to be the last run of these rings but the thread has an unintended life all its own.
That's okay they post here John, gives me something to look back on, and I would start a new thread anyways..
I say leave it up, it has helped many find info about them...
Comments
Polk 1.2tl's Fully modded with dreadnought
Rogue Atlas Magnum
Rogue Magnum 66
North Star Intenso Dac
Auralic Aries Mini Streamer
Marantz UD 7007
Pangea PC
Wireworld Equinox 7 interconnects
Wireworld Equinox 7 Speaker Cables and Jumpers
Home theater
Marantz SR 5009-B&W Cdm1nt, Cdm Center Channel
Backups Polk Monitor 5 peerless,2.3tl,SRS2 pin/blade,Polk Crs+ pin/blade with stands.McCormack Dna 0.5 Deluxe,Dared Sl 2000A,Dayens Ampino
Herakles.
You asked for them and here they are....
SDA SRS/1.2/1.2TL $118.96
SDA 2.3/2.3TL $95.36
SDA 3.1 $79.74
SDA 1C's $70.64
SDA SRS 2's $70.64
SDA 2's (3 drivers) $58.84
SDA 2B"s/studios $47.04
SDA CRS+s $44.34
Monitor 10's $44.34
Monitor 7B's/7's $32.54
If you have something else let me know. shipping is $15
All sets will come with drill templates and Black Zinc 8-32 BHCS for your drivers, and for the passives....
As always thanks...
Larry.
POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
PIONEER PL-510A SONY BDP S5100
POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1
and 1 x full set Sda 1b's please.
Postage abit more $$ to Perth western australia 6055
cheers
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's
Think this kind of says it all, for now...
It's good for people to express their interest here. Larry (Toolfan66) makes runs of these when a) There's enough interest shown and b) both his shop and he have the time to allow for a run.
Take my advice on this: If you live in even a semi-humid climate, tape up the tapped inserts and hit the rings with a coat of spray paint. I had a set made for RTA 11TLs that I never got around to mounting, and they developed a light coat of rust on the ring portion that I let Dan (EnderShadow) sand off before he mounted to his RTA's.
The (2, 3 years old?) RTA rings:
I painted my rings before installing in my SDA 2BTL:
Jay
SDA 2BTL * Musical Fidelity A5cr amp * Marantz DV-9500 * Modded Adcom GDA-600 DAC * Rythmik F8 (x2)
Micro Seiki DQ-50 * A hodgepodge of cabling * Belkin PF60
Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
CRS+'s (4.1 TL's) - Office
SDA1C's - Famdamly Rm
SDA1C's - Master Bedroom
[email protected]
Denon PRA-1500, Denon POA-2400, Denon TU-660, Denon DCD-2560, Denon DVD-2910, Denon DRS-640, Denon DP-30L II w/DL-301 mc cart, BSR EQ-3000, DCM Timeframe 600's
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk
Agreed... And also when they show up.... buy all you think you might EVER need..... because that way you've got em.
And they are a easy sell if you end up not needing them.
I swear by my life and my love of it that I will never live for the sake of another man, nor ask another man to live for mine.” .
“If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
That's okay they post here John, gives me something to look back on, and I would start a new thread anyways..
I say leave it up, it has helped many find info about them...
agreed:
Well Please
no pressure Larry....just kidding bra I know one of these days you'll get to it and I'm in no hurry...
pre Thanks Larry