Why wouldn't you modify your gear?

Options
13»

Comments

  • megasat16
    megasat16 Posts: 3,521
    edited February 2011
    Options
    Electronics have more leverage to mod than speakers in General. You have many big and small mods depends on how well you are versed with Electronics Theories and Concepts and the actual ideas. But it is not endless. Speakers have even lesser choice of mods available. But once you've done all the possible mods for the speakers and you hit a possible road block when the drivers and the enclosure become a limitation.

    It's very possible you end up with a whole new speakers all the mods done. And you stop and realize that "Oh, wait! I think the drivers are the bottleneck in my speaker performance and I know it'll sound better with this new super duper driver". And most speaker don't have the driver upgrade available. So, you need to start all over again.

    So, where does it stop?
    Trying out Different Audio Cables is a Religious Affair. You don't discuss it with anyone. :redface::biggrin:
  • treitz3
    treitz3 Posts: 20,366
    edited February 2011
    Options
    RuSsMaN wrote: »
    I don't think it's a waste, and I'm not upset about anyone doing it. How many modded preamps and amps have I sold here, right here at good ole' Club Polk.

    Trey's post just triggered a 'rant' for me, that's all. It wasn't even about Trey, my point is that caps are the flavor of the month. Not for the hardcore mod crowd, but the crowd in general. The stuff that Jesse, Trey, Raife has done is mind boggling, and awesome. Super hardcore.

    I just feel like it's becoming one of the default answers to everything - right there with the 'you need at least 250 watts per channel' or what have you. Does that make ANY sense?

    Cheers,
    Russ
    I apologize if you feel I was singling you out. I didn't even mention that it was you who quoted what actually started the "rant" on this thread.....well, until now. It wasn't about you. I guess we bounced off each other. You had a rant and I followed suit off of your rant.

    For me? I have just come to a crossroads in my audio journey. At this point, I'm tired of spending thousands of dollars to make what I would consider minuscule improvements when I have the knowledge to spend hundreds and make what I would consider a stellar improvement.

    You got me with your comment at a turning point for me. I had already made the decision that I will stop buying, swapping and selling gear and just concentrate on what great sounding rig I already have.......well......sound better.

    Of course I will purchase more gear later to see if I can upgrade. I realize that no matter who you are or what you have, there is always something better out there. Maybe you and others can understand this. I have had in the past, very close to audio nirvana that yielded me so much musical enjoyment. What did I do? I went and tried to upgrade. To be honest, I should have stopped there and just tried to improve upon that system. Countless thousands later, I am on par to what I had......albeit a completely different system.

    This time I'm not gonna upgrade. I'm gonna stay the course and improve on with what I have. It may or it may not work. Judging from the experiences I have evaluated in the past and recently? I have no problem doing so and I look quite forward to hearing the end result as to what hits my ears. Good thing is for me [Thanks to Trey, as we have very similar speakers by the same manufacturer] is I already have heard what the end result can be.....and I like it. Better than any upgrade I have had in the past 3 or 4 years, regardless of cost.

    Saving $$$ is just a bonus.
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • treitz3
    treitz3 Posts: 20,366
    edited February 2011
    Options
    shack wrote: »
    I am not a tweeker or modifier. I buy what sounds good to me...and run with it. The only gear modification I have is the upgraded tweeters and binding posts in my SDA ICs...and that was done by the previous owner. Now I will upgrade gear...but not modify it.

    Also, once you go down the mod path...you have basically destroyed the resale value of that gear. Modified gear rarely has value to anyone other than the owner or someone who just happens to want that mod (the majority of buyers are like Steve).
    Mistaaahh Shack Daddy! :biggrin:

    I have a proposition for you, sir. I have recently acquired a heavily modded set of SDA 1C's that have been gone through, carefully modded and customized. I ask of you this, would you be willing to entertain the thought of trying this set in your house? This would be, of course, free of charge. I'll deliver them, help set them up and leave you alone for whatever time you feel necessary to evaluate them. They are currently down in Florida and it may take some time but I'd like to introduce to you the thought of having a highly modded set of what you currently have in your house, for you, to play with at your whim, for as long as you want. Within reason, of course.

    If you are interested? I'm dead serious.

    The only thing I would ask in return would be your evaluation of them and whether or not you still feel the same way about your comments above. Good or bad, whatever you feel. That's all I ask.
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • treitz3
    treitz3 Posts: 20,366
    edited February 2011
    Options
    http://www.polkaudio.com/forums/showthread.php?t=111556

    The link above is the actual speakers I'm talking about, Shack. I have more rings coming and I may have the caps upgraded even further and fully broken in by the time you get them.
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • cokewithvanilla
    cokewithvanilla Posts: 1,777
    edited February 2011
    Options
    I wouldn't modify my gear if:

    I had a fear of damaging it in any way (cosmetically, functionally)
    If it would void my warranty
    If, for the cost of the upgrade (give or take a few), I could simply upgrade to something better
    If it would negatively affect resale value (think of a giant spoiler and autozone flame stickers)
  • DarqueKnight
    DarqueKnight Posts: 6,765
    edited February 2011
    Options
    Just making sure everyone understand crossover modifications is simply taking a higher quality item of the same exact value and dropping it in place of a lesser quality product?

    You are not altering anything about the speaker except giving it better parts. You are not changing crossover points or anything.

    Every group has deviants. It seems some people project the deviant behavior of the few to the many. There are deviant modders who do bad things which butcher a nice piece of gear and there are good modders who do good things, under manufacturer or other credible advisement, which enhance the performance and value of gear.

    It is ironic that some people assume that good modders are arrogantly implying that they know more about a product than the original designers and that, if the original designers had wanted a particular part or feature in a piece of gear, it would have been included. The truth is, things often get watered down from the original design specification due to the constraints of parts availability, market conditions and the need to meet a certain price point. The individual modder who is not bound by these constraints is free to replace parts that will result in a more optimal design that is closer to, or even identical to, the original design specification.

    This is an interesting recent comment:
    Hello, I am new to the forum, but just picked up a set of SDA SRS and am interested in getting a set of the rings and tweeter brackets. I called Polk to order some replacement MW6503's and the rep on the phone even suggested looking into this!
    Proud and loyal citizen of the Digital Domain and Solid State Country!
  • Outfitter03
    Outfitter03 Posts: 563
    edited February 2011
    Options
    I wouldn't modify my gear if:

    I had a fear of damaging it in any way (cosmetically, functionally)
    If it would void my warranty
    If, for the cost of the upgrade (give or take a few), I could simply upgrade to something better
    If it would negatively affect resale value (think of a giant spoiler and autozone flame stickers)

    I think this is an excellent list of reasons why most people do not modify audio equipment and speakers.

    I bought a real nice set of Monitor 10s this year from someone who was active in this hobby. His mantra was you have have to have an exit plan. He had over 15 years of trading equipment and said he made an average of 10-15 audiogon sales a year. Searched for deals, listened a little while then sold. The only type of "Mod" he did was have a technician he knew, repair vintage tube equipment he purchased that was broken. This is where he made the most money. I also believe for him it was very much about the money!

    So the other item that I would add to cokewithvanilla's list is:

    I cannot make money or at least recover the money that I spend on the upgrade back when I decide to flip this item.

    That is how I got a Cherry Set of Monitor 10's. This individual would have loved to hear them that way, but knew that if he upgraded with a good quality capacitor such as sonicaps, it would be hard to impossible to reclaim that upgrade money when the flip bug kicked in. Which for him I believe was about every 6 months.
  • shack
    shack Posts: 11,154
    edited February 2011
    Options
    treitz3 wrote:
    Mistaaahh Shack Daddy! :biggrin:

    I have a proposition for you, sir. I have recently acquired a heavily modded set of SDA 1C's that have been gone through, carefully modded and customized. I ask of you this, would you be willing to entertain the thought of trying this set in your house? This would be, of course, free of charge. I'll deliver them, help set them up and leave you alone for whatever time you feel necessary to evaluate them. They are currently down in Florida and it may take some time but I'd like to introduce to you the thought of having a highly modded set of what you currently have in your house, for you, to play with at your whim, for as long as you want. Within reason, of course.

    If you are interested? I'm dead serious.

    The only thing I would ask in return would be your evaluation of them and whether or not you still feel the same way about your comments above. Good or bad, whatever you feel. That's all I ask.

    Tom, that is a VERY generous offer...but not necessary. I'm sure the modded 1Cs will be an improvement over my mildly modded speakers. That was not my point. My point was..."I'm not a tweeker". I get to a place where I am satisfied with the gear I have...and I'm good to go for a fairly long time. If it doesn't sound right, I fix it or change it out...but it isn't an ongoing process for me. I've been able to listen to a lot of really good speakers (and other gear) through the years. I am very fortunate right now that IF I want better...I can go get it. But for now I am fine with what I have.

    I would love to hear those ICs...but it is really not necessary to bring them to me. You set them up at your place and invite me for a visit. Only 4 hrs or so one way.

    Again thanks for the very cool offer.
    "Just because you’re offended doesn’t mean you’re right." - Ricky Gervais

    "For those who believe, no proof is necessary. For those who don't believe, no proof is possible." - Stuart Chase

    "Consistency requires you to be as ignorant today as you were a year ago." - Bernard Berenson
  • steveinaz
    steveinaz Posts: 19,547
    edited February 2011
    Options
    ^ 10-4, what Shack said. My amp is 7yrs old, my CDP 6yrs old, my pre/dac (though a new version) has been the same for 6yrs. Only my speakers have changed recently.
    Source: Bluesound Node 2i - Preamp/DAC: Benchmark DAC2 DX - Amp: Parasound Halo A21 - Speakers: MartinLogan Motion 60XTi - Shop Rig: Yamaha A-S501 Integrated - Source: Rotel CD14MkII CD Player - Speakers: Elac Debut 2.0 B5.2
  • treitz3
    treitz3 Posts: 20,366
    edited February 2011
    Options
    No problem, Shack. Just thought I'd ask.
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • steveinaz
    steveinaz Posts: 19,547
    edited February 2011
    Options
    Well, the original question was: "Why would'nt you modify your gear?" correct? I'm stating (for me) that personally, I'd rather find a piece of equipment that does what I want it to do, without modification---and I think that is the point Shack is making as well.

    I own a car, that doesn't mean I want to be an ace mechanic.
    Source: Bluesound Node 2i - Preamp/DAC: Benchmark DAC2 DX - Amp: Parasound Halo A21 - Speakers: MartinLogan Motion 60XTi - Shop Rig: Yamaha A-S501 Integrated - Source: Rotel CD14MkII CD Player - Speakers: Elac Debut 2.0 B5.2
  • Stew
    Stew Posts: 648
    edited February 2011
    Options
    Just making sure everyone understand crossover modifications is simply taking a higher quality item of the same exact value and dropping it in place of a lesser quality product?

    You are not altering anything about the speaker except giving it better parts. You are not changing crossover points or anything.

    +1

    I have less than $500 in tried and true mods to my SDA 2B-TL's. I would have to spend many times that on a stock speaker to even come close to their sound and they still wouldn't image like SDA's. Besides, it's fun. There's more than one way to get there but I like the bang for the buck I get with modding.
    SDA 2B-TL (Sonicap/Solen/Mills, Erse Super Q, Rings, Spikes, No-Rez)
    1000VA Dreadnought
    Dared SL-2000a (Siemens & Halske TM 12AT7WA's, Brimar 5Z4G)
    Jolida JD-100a (Sylvania BP TM Gold Brand 5751's), NAD C275BEE, Blue Jeans

    RTiA3, Onkyo TX-SR605
  • treitz3
    treitz3 Posts: 20,366
    edited July 2011
    Options
    shack wrote: »
    I would love to hear those 1Cs...but it is really not necessary to bring them to me. You set them up at your place and invite me for a visit. Only 4 hrs or so one way.
    I'll do you one even better than that. They will be featured at an audio event here in the next two months very close to you. We are planning on setting them up on an all tubed rig. Best thing about it is that the location is about 7 miles west of Bryson City, NC. This is only about 7 miles east of the Tennessee border. They will be featured for 8 days [September 10th-18th] and you are more than welcome to come and check them out.

    That should narrow your drive down to a little above an hour or so. Stop by, get your listen on, have a beer or two on me [meal on the house too] and be sure to bring some of your favorite music. If you can make it, it would be great to see you again. Oh, and some fellow Polkies will be there as well and I'm sure they would love to see you again as well. LMK, bro'.
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~