Group Buy '16: Dreadnought Avel Lindberg 1000VA Isolation Transformers

Options
1…34689…16

Comments

  • msg
    msg Posts: 10,650
    Options
    SketchyCraig. One of my favorite dudes.
    I disabled signatures.
  • Goat
    Goat Posts: 6
    edited January 2017
    Options
    Hi all, just joined and am researching all of this. I have wanted a pair of polk SDA's for a long time. I had a pair of monitor 12's many years ago and regret selling them. I just landed a pair of 2.3tl's and my amp is mono design so to use it I would need to buy or build one of these. Is there a chance to get in on this yet? Now I am running a pair of carver amazing originals that the ribbons are just about done for on so it was time to find another speaker I always wanted to have but never could afford at the time.
  • vcwatkins
    vcwatkins Posts: 1,992
    Options
    Hi, @Goat. Congrats on the 2.3tl's and welcome to the forum.

    You can still join the group buy. I will send you information. As long as payment and shipping info is received by the time all the current members pay, you'll be in. To give you an idea on timing, we are 75% paid up after two days. Look for a PM from me today.

    Thanks,
    Craig
    Beach Audio: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • lightman1
    lightman1 Posts: 10,802
    Options
    SketchyCraig is the man!
  • nikonik
    nikonik Posts: 120
    Options
    $ent :)
  • gmcman
    gmcman Posts: 1,877
    Options
    Funds sent. Thanks again for setting this up.
  • Goat
    Goat Posts: 6
    Options
    Funds sent. Thanks for adding me in!
  • vcwatkins
    vcwatkins Posts: 1,992
    Options
    Great job on settling up, guys! 85% home.
    Beach Audio: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • gmcman
    gmcman Posts: 1,877
    Options
    Toolfan66 wrote: »
    5bl2oxhrh4bb.jpg

    Nice!
  • heiney9
    heiney9 Posts: 25,705
    Options
    Sweet, but can we get some info about how the cases are prepped? I am not using Neutrik, but standard speaker terminals. Are the cases pre-drilled? If so, what pre-drilled options do we have?

    Thanks
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | Galion TS P75 Pre | Holo Audio Cyan 2 Dac | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul!
  • nspindel
    nspindel Posts: 5,343
    Options
    So Larry what about the idea of a badge??? Someone around here's gotta be a decent graphics guy, do up some sort of Dread logo and somehow get it on the front face?
    Good music, a good source, and good power can make SDA's sing. Tubes make them dance.
  • BlueBirdMusic
    Options
    I would like to have Larry's old "Eyeball" profile pic as a badge perhaps with the word "Dreadnought" to the right of it.
    "Sometimes you have to look to the past to understand where you are going in the future"
    Harry / Marietta GA
    m9iutt1ly1yd.png
  • nspindel
    nspindel Posts: 5,343
    Options
    I was thinking something a little more Rasta mon.
    Good music, a good source, and good power can make SDA's sing. Tubes make them dance.
  • BlueBirdMusic
    Options
    I don't know what that means mon? Examples?
    "Sometimes you have to look to the past to understand where you are going in the future"
    Harry / Marietta GA
    m9iutt1ly1yd.png
  • nspindel
    nspindel Posts: 5,343
    Options
    Never been to Jamaica eh?
    Good music, a good source, and good power can make SDA's sing. Tubes make them dance.
  • nspindel
    nspindel Posts: 5,343
    Options
    I'm thinking about a smiling Jamaican dude with huge dreads and a pair of speakers. And then the word Dreadnought spelled out underneath.
    Good music, a good source, and good power can make SDA's sing. Tubes make them dance.
  • BlueBirdMusic
    Options
    That sounds like a unique one.
    "Sometimes you have to look to the past to understand where you are going in the future"
    Harry / Marietta GA
    m9iutt1ly1yd.png
  • heiney9
    heiney9 Posts: 25,705
    edited January 2017
    Options
    Toolfan66 wrote: »
    heiney9 wrote: »
    Sweet, but can we get some info about how the cases are prepped? I am not using Neutrik, but standard speaker terminals. Are the cases pre-drilled? If so, what pre-drilled options do we have?

    Thanks

    I will post more later, I can just send you blank panels, and you can mod to your liking..

    Since I wasn't paying that much attention to the first couple rounds, I wasn't sure how they were manufactured. I'd prefer to have them done. I don't have the tools or work bench necessary to do it easily or neatly....lol. I don't even know how they are assembled.

    Mine was more or less an inquiry as to how or what options were available.

    H9

    I also don't have the tranny to see the orientation of the wires, etc.

    P.s. If we are going to discuss the cases later-on that's fine.

    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | Galion TS P75 Pre | Holo Audio Cyan 2 Dac | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul!
  • vcwatkins
    vcwatkins Posts: 1,992
    Options
    Great job on settling up, guys!. Just 3 to settle up and we're home.
    Beach Audio: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • vcwatkins
    vcwatkins Posts: 1,992
    Options
    2 more to go!
    Beach Audio: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • heiney9
    heiney9 Posts: 25,705
    Options
    I agree, very impressed this is going so smoothly. Not that it wouldn't, but usually when collecting funds there are a few hiccups, delays, discrepancies, etc.

    If Avel Lindberg turns these out quickly we'll be up and running in no time.

    H9

    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | Galion TS P75 Pre | Holo Audio Cyan 2 Dac | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul!
  • F1nut
    F1nut Posts: 52,406
    Options
    Quit being a pain Brock, use the Neutrik connectors.
  • heiney9
    heiney9 Posts: 25,705
    Options
    I am not modding everything just for the Neutrik's. I didn't know that was how the cases were all manufactured. But then there isn't a thread for the cases yet to see how those are constructed.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | Galion TS P75 Pre | Holo Audio Cyan 2 Dac | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul!
  • heiney9
    heiney9 Posts: 25,705
    edited January 2017
    Options
    My space is very limited and I may end up placing the case vertically, that's why I will need to know at some point how the cases are made, dimensions and what options we have for connection.
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | Galion TS P75 Pre | Holo Audio Cyan 2 Dac | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul!
  • vcwatkins
    vcwatkins Posts: 1,992
    Options
    The case I got from Larry in '12 was drilled for binding posts. Not sure if the '14 crew got all Neutrik, all binding posts, or a mix? Think it was a mixture, but not sure.
    Beach Audio: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • F1nut
    F1nut Posts: 52,406
    Options
    The case should be vertical as it sounds better that way. In regards to the orientation it matters not which connection type is used.
  • vcwatkins
    vcwatkins Posts: 1,992
    Options
    heiney9 wrote: »
    My space is very limited and I may end up placing the case vertically, that's why I will need to know at some point how the cases are made, dimensions and what options we have for connection.

    I have mine sitting vertically on what would ordinarily be the face plate with binding posts on the top plate that would ordinarily be the rear. Pretty sure F1's Neutriks are on opposing ends to be used vertically (or horizontally too I suppose).
    Beach Audio: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • heiney9
    heiney9 Posts: 25,705
    Options
    I am not modding my SDA terminal cups to accept Neutriks. Ideally I'd like to set it up like your Craig, except have the binding posts mounted on each side, but I'm not sure of the orientation of the wiring for the transformer. That's the cleanest and best way for wire management. Having all MIT stuff really takes up real estate behind my low boy shelf.

    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | Galion TS P75 Pre | Holo Audio Cyan 2 Dac | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul!
  • vcwatkins
    vcwatkins Posts: 1,992
    edited January 2017
    Options
    The leads are long enough and case large enough to run to either same side or opposing sides (adjacent corners). Someone correct me if I'm wrong. but I think Larry's cases have been either Neutrik on opposing sides or BP's on same side. If so, maybe Larry could offer opposing side BP holes.

    You could easily mix the terminations - I've got Neutrik at speakers and BP's at Dreadnought. You could do the reverse/

    F1's Neutrik:
    0ydsl98dw56w.jpg

    DK's BP:
    DN-uprt004.jpg
    f1dn.jpg 177.8K
    Beach Audio: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • F1nut
    F1nut Posts: 52,406
    edited January 2017
    Options
    nzs81t3w0w7d.jpg

    dyonj4s7hrkt.jpg

    All connected with MIT cable, piece of cake.