SDA Custom Circuit Boards Round 2 - Anyone Interested?
Comments
-
Yes it is, If and when I get them in, I went ahead and put you on the list.
I got the boards in but cosmetically they aren't up to my standards (see link) and I'm trying to send the current batch back for a refund. In the mean time I'm trying a new supplier so it may be awhile before I have any.
Thanks. And no worries. I have been following your progress and troubles you've had. I just recently came into a situation where I will need a set of your boards.
I'm still sourcing out parts needed. I've checked your site so I believe I'm set as far as what I all need to get down the road. -
Yes, Tony, I do believe you're right. . . SDA 2B Studios . . Somehow there's always been a bit of confusion with this issue. The original lit that came with the SDA's states the Stereo driver is MW6510 and the Dimensional is MW6511 . . . I'll tear into it this week and get back with you. But if I pull a 23 yr old driver, I may as well replace it . . . Which RDO do you recommend?
Thanks!
GAC Regenerator PS Audio PerfectWave Power Plant 10
Source Lumin U1 Mini into Lampizator Baltic 4 DAC
Pre Cary SLP-05
Power Rogue M180 Dark monos
Mains Salk HT2-TL
Rythmik F12 -
I recently acquired a pair of SDA 2b studios. I apologize for my ignorance, but it appears this would work for my speakers. If so, I would like a set if its not too late. Thanks much.
-
Well guys I went all the way to the top. Called the CEO and talked to him yesterday afternoon and his answer was no refund or remake because and I quote "the boards are functionally correct and the cosmetic issues are within industry standards also once populated for the most part the cosmetic issues would not be visible". Now for the most part this is true and I think most of you wouldn't even notice but that's not the point is it.
So this is what I'm thinking of doing, Because the boards are functionally correct and the cosmetic issues will have no affect on there function I'm going to sort the boards into 2 groups, ones that I'll sell and ones that I may karma at a later date.
I've also ordered a pair of boards from a company down under as a test where I clearly stated that they need to be functionally and cosmetically perfect and what I mean by perfect. They assured me that they could do the job, These board are suppose to ship on the 19th and hopefully be here by next weekend.
Anyway I would appreciate any ideas, comments or suggestions that you guys may have.“The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain -
I'm interested in a pair of the "reduced price" units. Awaiting price and availability. Again, I don't own a pair of speakers that these would fit...but maybe someday.I'm going to sort the boards into 3 groups, ones that meet my standards (full price), ones that have minor cosmetic blemishes (reduced price) and maybe karma the rest at a later date. -
Tony I'm interested in ones that meet your standards (full price) or ones that have minor cosmetic blemishes (reduced price) if nothing else is available.
Gary -
My take.......they are what they are, it's not Tony's fault they may not be cosmetically perfect and besides from what I've seen once the components are installed, no one will ever know about any insignificant cosmetic issue. Tony has gone out of his way doing this for the collective and I don't think it's right that he takes a hit. I believe the cost was $100.00 for a pair of boards and I think that's what should be paid by those that committed to buying them. After all, you all did beg him for another run.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
My take.......they are what they are, it's not Tony's fault they may not be cosmetically perfect and besides from what I've seen once the components are installed, no one will ever know about any insignificant cosmetic issue. Tony has gone out of his way doing this for the collective and I don't think it's right that he takes a hit. I believe the cost was $100.00 for a pair of boards and I think that's what should be paid by those that committed to buying them. After all, you all did beg him for another run.
I agree!! They will all work the same and we are talking about cosmetics.. -
If I end up with SDA 1C this weekend I will pay full price for blemished boards...I'm in the tech industry and have seen alot worse commercial boards
Tony's efforts are worth the value including his website2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC
erat interfectorem cesar et **** dictatorem dicere a -
I'll take 2 pairs at full price without regard to cosmetics. Not a big deal to me as long as they're legible and functional.
Thanks a million for your hard work in making this happen.
Craigb]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet -
Tony i would like the best quality boards for a reduced price ok?Main Rig-Realistic AM/FM Record player 8 track boasting 4 WPC
Backup Rig-2 CH-Rogue Audio Zeus w/Factory Special Dark Mods,Joule-Electra 300ME Platinum Preamp,OPPO-105 w/Modwright Tube Mod, Auralic Aries G2.1,Polk 2.3TL,3.1TL's,Dreadnought,RTA-15TL's,1C's All Fully Modded,2xRTA-12c's ,Benchmark DAC3 HGC,Synology NAS,VPI Scout w/Dynavector DV-20XH and Rogue Audio Ares Phono Preamp,Sony PCM-R500 DAT,HHB-850 Pro CDR,Tascam CC-222SLMKII Cassette/CDR,MIT S3.3 Shotgun Cables,Shunyata Hyra-8,Shunyata and Triode Labs Power Cords
I’M OFFENDED!!!! -
Tony, as long as they're functional and legible I'm in. I agree with F1nut, we asked you to do this so you shouldn't take the financial hit. Once they're populated and inside the cabinet you can't see'em anyway."Science is suppose to explain observations not dismiss them as impossible" - Norm on AA; 2.3TL's w/sonicaps/mills/jantzen inductors, Gimpod's boards, Lg Solen SDA inductors, RD-0198's, MW's dynamatted, Armaflex speaker gaskets, H-nuts, brass spikes, Cardas CCGR BP's, upgraded IC Cable, Black Hole Damping Sheet strips, interior of cabinets sealed with Loctite Power Grab, AI-1 interface with 1000VA A-L transformer
-
I am in for a blemished board for my 1C project. If they are fully functional I could care less if they are not asthetically perfect. They will be inside the cabinet anyway.
I have already upgraded the tweeters and when I sell my "spare" pair of 1C's I will have enough to buy the caps. Thanks. -
Honestly it makes no difference to me. If it's functional then great. This will be my first major project so some cosmetics are mute to me.
With saying that, I can see as can many others the hard work and dedication you put into this to ensure that quality exceeds even the basic expectations and that's great to see. Not many places or people give a hoot.
I am willing to buy the worst cosmetic piece you have as I am after the performance of this mod, not the appearance. Regardless, I'm still on board. -
Whatever helps you out the most. I am bio-medical electronics repair and I also realize that they should perform well despite cosmetic appearance. Thanks for going through all this hassle!
-
I'm still in for a set.>
>
>This message has been scanned by the NSA and found to be free of harmful intent.< -
I'm still in Tony. I'll take functionality over good looks. Tell me when and where to send the funds.
I believe you said you'll accept PayPal, correct? -
Tony,
I'll take what ever you have, either full or reduced price.
DavidMcintosh MC-501 mono blocks
Mcintosh C-45
Mcintosh MVP-871
PS AUDIO AV5000
MIT 3.3 Shotgun biwire speaker interface
MIT 3.3 Shotgun XLR interconnects
Polk 2.3TL's Gimpod boards/F-1 modded crossovers/dynamat/JB weld/Larry's rings/Blackhole 5 strips
Polk 3.1 TL's mint/stock (purchased new)
Polk SDA-2's -
I'll pay full price for any boards as long as they are functional. I don't think you should be losing money.
-
Hi Tony,
I'm in as well for the less then perfect boards.
Thank youPolk SDA 1.2 TL
Infinity SSW-210
Integra DTR 7.1
Pioneer SC-57 Elite
Sony X777ES
Sansui BA-5000
Hafler XL 600's in mono w/ George Kay Audio Tube upgrades
Hafler xl 600 stock
Krell FPB 600
Avel 1000VA Dreadnought -
Tony,
I'm still in for full price. You shouldn't eat the cost, but thanks for caring enough to ensure the quality is first-rate. You've been a stand-up guy...helping me in the past (id'ing my dual 1C XO parts) and providing the excellent boards I have in my 1C's and 1.2tl's. You say the current boards are 100% functional and I have no problem continuing with this purchase!
John➀Speakers: Polk1.2tl's (Uber Mods) ➁Pre/Amp/DAC: PS Audio BHK Signature & 250, DirectStream ➂Cables/IC's: MIT S1Bi-Wire/S1 Balanced +Avel Lindberg 1000VA "Dreadnought" ➃Power Conditioner: PS Audio P15 Power Plant ➄Power Cords: Core Power Technologies Gold, DH Labs Power Plus DIY w/Neotech NC-P301 & P311ends ➅Streaming: Roon ROCK on wifi'd NUC, TP-Link WAP, & Uptone EtherREGEN, AfterDark, Emperor Double Crown Clock, Black Modernize LPS, PS Audio AirLens⟿Ω☯☥☮⟿🔊♩♪♫♬♩♪♫♬♩♪♫♬ -
The boards will "officially" be going up for sale Monday. :redface::redface:
PM's have been sent to everyone who basically pre-ordered (Dennis Gardner & fjross empty your mail box) if I missed anybody PM me.“The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain -
Tony,
Do you have a picture of the new boards?POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
PIONEER PL-510A SONY BDP S5100
POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1 -
Gimpy,
I'll take a set of the functional but wrinkled boards for the 1c (Don't scare me none!They are in the cabs for crying out loud!) Any way...have you given more thought to the Rta11t series and if so when can I get my skinners on a set? LOL. Do you still have my email addy? If not let me know. Thanks a bunch, DanToo much **** to list.... -
Hey guys,
Just wanted to comment that Tony sent me a set of his "KARMA" boards...
Tony is just OCD - those things look great and are far superior to any PCB I have worked with..
Purchase these with confidence!- Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit. -
PM's have been sent to everyone who basically pre-ordered
Tony,
PP sent and replied to PM. I'm visiting your neck of the woods for the next month. I can swing by and pick up the boards if it'll save you the time/effort shipping them. I met Larry a few weeks ago...would be cool to put another face to the cool upgrades I've been fortunate enough to accomplish because of fellow Polkies. Either way...as always...thanks!
John➀Speakers: Polk1.2tl's (Uber Mods) ➁Pre/Amp/DAC: PS Audio BHK Signature & 250, DirectStream ➂Cables/IC's: MIT S1Bi-Wire/S1 Balanced +Avel Lindberg 1000VA "Dreadnought" ➃Power Conditioner: PS Audio P15 Power Plant ➄Power Cords: Core Power Technologies Gold, DH Labs Power Plus DIY w/Neotech NC-P301 & P311ends ➅Streaming: Roon ROCK on wifi'd NUC, TP-Link WAP, & Uptone EtherREGEN, AfterDark, Emperor Double Crown Clock, Black Modernize LPS, PS Audio AirLens⟿Ω☯☥☮⟿🔊♩♪♫♬♩♪♫♬♩♪♫♬ -
Mail box cleared.The boards will "officially" be going up for sale Monday. :redface::redface:
PM's have been sent to everyone who basically pre-ordered (Dennis Gardner & fjross empty your mail box) if I missed anybody PM me.
Thanks DaveMcintosh MC-501 mono blocks
Mcintosh C-45
Mcintosh MVP-871
PS AUDIO AV5000
MIT 3.3 Shotgun biwire speaker interface
MIT 3.3 Shotgun XLR interconnects
Polk 2.3TL's Gimpod boards/F-1 modded crossovers/dynamat/JB weld/Larry's rings/Blackhole 5 strips
Polk 3.1 TL's mint/stock (purchased new)
Polk SDA-2's -
Hey guys,
Just wanted to comment that Tony sent me a set of his "KARMA" boards...
Tony is just OCD - those things look great and are far superior to any PCB I have worked with..
Purchase these with confidence!
I am not OCD!, I'm just a little anal retentive and one picky SOB although I do have bouts of C.R.I.S. and C.R.S. from time to time.
:razz:
John sounds like it could be fun but I don't think anyone's going to want to be around me for the next couple weeks as I'm going to try quitting smoking (again:redface:) and tomorrow is my quit date. Your boards are going out in the morning along with everyone else.Tony,
PP sent and replied to PM. I'm visiting your neck of the woods for the next month. I can swing by and pick up the boards if it'll save you the time/effort shipping them. I met Larry a few weeks ago...would be cool to put another face to the cool upgrades I've been fortunate enough to accomplish because of fellow Polkies. Either way...as always...thanks!
John“The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain -
I don't see SDA 1B's on the list, can these be done. Also...what is involved on my end to install???"They're always talking about my drinking, but never mention my thirst" Oscar Wilde
Pre-Amp: Anthem AVM 20
Amp: Carver TFM-35
Amp: Rotel RB-870BX
Fronts : SDA 1B w/ RDO-194s
T.V.:Plasma TC-P54G25
Bluray: Oppo BDP-93
Speaker Cables: MIT Terminater
Interconnect Cables:DH Labs Silver Sonic BL-1isonic -
renowilliams wrote: »I don't see SDA 1B's on the list, can these be done. Also...what is involved on my end to install???
Because these boards won't work for the SDA 1B's period.“The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain
