Vintage Monitor and SDA Speaker Deals
Comments
-
I'm thinking about buying these for parts. Does anyone know if these drivers fit other models?
https://orangecounty.craigslist.org/ele/d/el-toro-vintage-polk-monitor-12-speakers/7163271876.html
They came with MW6503's so yes many others take those drivers
Someone beat me to the punch. :'(
How much was it?
They were 125 dollars.
$125 for 8 drivers and 2 tweeters? Yes, I know it is a sin but get out the chop saw! -
I'm thinking about buying these for parts. Does anyone know if these drivers fit other models?
https://orangecounty.craigslist.org/ele/d/el-toro-vintage-polk-monitor-12-speakers/7163271876.html
They came with MW6503's so yes many others take those drivers
Someone beat me to the punch. :'(
How much was it?
They were 125 dollars.
$125 for 8 drivers and 2 tweeters? Yes, I know it is a sin but get out the chop saw!
Plus, I believe that the bass driver is shared with the one in the 3.1TL.
I have both. I can double check but I’m pretty sure the 3.1 PW is unique to the 3.1.HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
Yea my 3.1’s are in the den at my house. I think my son stored the Monitor 12’s in one of the bedroom closet. If I have time tomorrow I’ll pull and compare.HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
I'm thinking about buying these for parts. Does anyone know if these drivers fit other models?
https://orangecounty.craigslist.org/ele/d/el-toro-vintage-polk-monitor-12-speakers/7163271876.html
They came with MW6503's so yes many others take those drivers
Someone beat me to the punch. :'(
Good that those speakers avoided your death sentence.The Gear... Carver "Statement" Mono-blocks, Mcintosh C2800 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon MiND2 Shunyata Triton
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
How many flies need to be buzzing a dead horse before you guys stop beating it? -
There are 3 mw6511s for sale on eBay right now....
-
I'm thinking about buying these for parts. Does anyone know if these drivers fit other models?
https://orangecounty.craigslist.org/ele/d/el-toro-vintage-polk-monitor-12-speakers/7163271876.html
Not that you need more opinions, but I say go for it. You obviously don't need these speakers to give you the satisfaction you need with your current audio setup, and the set you would like the parts for is obviously not performing to your satisfaction. If you leave these whole, you'll have two sets of speakers that you are unsatisfied with. Use them for parts and you have the potential of being completely satisfied. Plus, the more rare these things become, the more enjoyment everyone gets from finding the ones they find. I say it's a win/win. -
M12 uses an SW 123Yea my 3.1’s are in the den at my house. I think my son stored the Monitor 12’s in one of the bedroom closet. If I have time tomorrow I’ll pull and compare.
HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
SDA 3.1’s use a SW-122
HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
No problem. They look a lot alike. I assume the weight might be the only difference. I love all my Polks.HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
What is that?HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
SRT fronts. IIRC parts are nearly unobtainable. Also, the control module is required.
-
Bass modules tend to have major issues at this point. If you're not looking for parts for an SRT system you already have, might not be worth the trouble.
I know there are others with more knowledge than me. Hopefully, they chime in. -
Those have been ridden hard and left in the rain... #walkaway.The Gear... Carver "Statement" Mono-blocks, Mcintosh C2800 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon MiND2 Shunyata Triton
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
How many flies need to be buzzing a dead horse before you guys stop beating it? -
nooshinjohn wrote: »Those have been ridden hard and left in the rain... #walkaway.
Please have a seat over here John.
Yes, this is an intervention.
The Polk family is all here today because we love you but we're worried about your use of hashtags. You're not even the same person anymore. I saw you going through my wallet. I know you stole money so you could go out and buy more hashtag. I think cold turkey is best here but we'll be by your side while you do it.afterburnt wrote: »They didn't speak a word of English, they were from South Carolina.
Village Idiot of Club Polk -
I wouldn't pay 500.00 for them UNLESS I had a good set. Controller is very hard to come by so there's that.
I know you said it was included, I'm just stating it may be the best part. -
nooshinjohn wrote: »Those have been ridden hard and left in the rain... #walkaway.
Please have a seat over here John.
Yes, this is an intervention.
The Polk family is all here today because we love you but we're worried about your use of hashtags. You're not even the same person anymore. I saw you going through my wallet. I know you stole money so you could go out and buy more hashtag. I think cold turkey is best here but we'll be by your side while you do it.
#poundsand
The Gear... Carver "Statement" Mono-blocks, Mcintosh C2800 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon MiND2 Shunyata Triton
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
How many flies need to be buzzing a dead horse before you guys stop beating it? -
Here is a pair of SRS's on the Georgia coast.
Has them listed as 1.2tl's....
https://www.facebook.com/marketplace/item/2660843500829452/
BDTI plan for the future. - F1Nut -
They could be 1.2's if they have the pin/blade IC socket.SDA SRS 2.3TL's
Silk Audio MS-90-BT integrated tube amp
Yaqin MS-20L integrated tube amp
SDA 2B TL's -
Picture on the back looks like the pin blade to me.
HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
Are you referring to the label when you say the picture on the back? If so, the sticker shows blade/blade. We can't go by the label because Polk used old stock parts on newer models. We need to see the actual socket itself in order to confirm.SDA SRS 2.3TL's
Silk Audio MS-90-BT integrated tube amp
Yaqin MS-20L integrated tube amp
SDA 2B TL's -
-
Polk SDA 1A speaker by me, $525.
https://akroncanton.craigslist.org/ele/d/peninsula-vintage-polk-audio-sda-1a/7170313846.html
-
-
2.3tl in NJ
https://cnj.craigslist.org/ele/d/sayreville-polk-audio/7161474497.html
Price seems nice, but weird theres no pictures. -
SRS 2's in Spartanburg SC
Priced a little to high for me but these are actually my favorite SDA speaker...
https://www.facebook.com/marketplace/item/608935110010082/
I plan for the future. - F1Nut -
SRS 2's in Spartanburg SC
Priced a little to high for me but these are actually my favorite SDA speaker...
https://www.facebook.com/marketplace/item/608935110010082/
I'm not that familiar with the SDA line and where they all fall. I love the 3.1's I have and really need to get them to the house in Camden. I also noticed that guy has other stuff for sale. Half tempted to pm him. I've always wanted to meet some of the fellow audio people and experience and learn more.HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
11T's in Delaware near Philly. Given the apparent condition, I think these are a good buy. If I had a place for them they'd be mine.
https://delaware.craigslist.org/ele/d/wilmington-vintage-polk-monitor-11t/7175010643.html -
11T's in Delaware near Philly. Given the apparent condition, I think these are a good buy. If I had a place for them they'd be mine.
https://delaware.craigslist.org/ele/d/wilmington-vintage-polk-monitor-11t/7175010643.html
Wasn't this line an early home theater type speaker? Or was it just the next design above the original Monitor series?HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
11T's in Delaware near Philly. Given the apparent condition, I think these are a good buy. If I had a place for them they'd be mine.
https://delaware.craigslist.org/ele/d/wilmington-vintage-polk-monitor-11t/7175010643.html
Wasn't this line an early home theater type speaker? Or was it just the next design above the original Monitor series?
It was part of the RTA series, the t in 11t stood for tower in some original papers I read.
