Polk L200 Speaker Demo Reviews

Options
1246715

Comments

  • erniejade
    erniejade Posts: 6,314
    Options
    Cool thanks!!
    Klipsch The Nines, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
  • ZLTFUL
    ZLTFUL Posts: 5,640
    Options
    With some more time on the L200s, I have to say that I am warming up to them...

    They have moved up my rankings list of what I have compared them to so far but that will be explained in my final review post.

    "Some people find it easier to be conceited rather than correct."

    "Unwad those panties and have a good time man. We're all here to help each other, no matter how it might appear." DSkip
  • Emlyn
    Emlyn Posts: 4,367
    edited November 2019
    Options
  • tonyp063
    tonyp063 Posts: 1,046
    Options
    I find this statement interesting.
    The L200s have a nominal impedance of 4 ohms, and at 85.5 dB efficiency, they're real "gas-guzzlers."

  • mhardy6647
    mhardy6647 Posts: 33,027
    edited November 2019
    Options
    They aren't my idea of an easy load on the bases of those two parameters*... but I
    (ahem, still) wanna see the actual measured impedance curve to see if they're really gas guzzlers or just geared kinda tall, so to speak :)

    _______________
    * it might be recalled that my daily drivers are ca. 104 dB/watt at 1 meter at nominally 16 ohms
  • F1nut
    F1nut Posts: 49,789
    Options
    tonyp063 wrote: »
    I find this statement interesting.
    The L200s have a nominal impedance of 4 ohms, and at 85.5 dB efficiency, they're real "gas-guzzlers."

    The L200 is actually very easy the drive with 4 ohm capable power.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • K_M
    K_M Posts: 1,627
    Options
    mhardy6647 wrote: »
    They aren't my idea of an easy load on the bases of those two parameters*... but I
    (ahem, still) wanna see the actual measured impedance curve to see if they're really gas guzzlers or just geared kinda tall, so to speak :)

    _______________
    * it might be recalled that my daily drivers are ca. 104 dB/watt at 1 meter at nominally 16 ohms

    But of course, phase angles determine how much of a load it is also, not just pure impedance.
  • mhardy6647
    mhardy6647 Posts: 33,027
    Options
    K_M wrote: »
    mhardy6647 wrote: »
    They aren't my idea of an easy load on the bases of those two parameters*... but I
    (ahem, still) wanna see the actual measured impedance curve to see if they're really gas guzzlers or just geared kinda tall, so to speak :)

    _______________
    * it might be recalled that my daily drivers are ca. 104 dB/watt at 1 meter at nominally 16 ohms

    But of course, phase angles determine how much of a load it is also, not just pure impedance.

    Part and parcel of the standard impedance plot.
    I assume(d) that everyone here who is interested in the issue of a loudspeaker as an amplifier load understands that.

    PolkSI7Fig1.jpg
    source: https://www.stereophile.com/content/polk-audio-lsi7-loudspeaker-measurements
  • mrbiron
    mrbiron Posts: 5,711
    Options
    My wife just erased my review by closing out a tab on my iPad. :'(

    Now I will start over again...
    Where’s the KABOOM?!?! There’s supposed to be an Earth shattering KABOOM!!!
  • K_M
    K_M Posts: 1,627
    Options
    mhardy6647 wrote: »
    K_M wrote: »
    mhardy6647 wrote: »
    They aren't my idea of an easy load on the bases of those two parameters*... but I
    (ahem, still) wanna see the actual measured impedance curve to see if they're really gas guzzlers or just geared kinda tall, so to speak :)

    _______________
    * it might be recalled that my daily drivers are ca. 104 dB/watt at 1 meter at nominally 16 ohms

    But of course, phase angles determine how much of a load it is also, not just pure impedance.

    Part and parcel of the standard impedance plot.
    I assume(d) that everyone here who is interested in the issue of a loudspeaker as an amplifier load understands that.

    In the DIY speaker forums we frequent, yes for sure, but in here, I tend to see a lot less in depth knowledge of speaker parameters and design.
  • mhardy6647
    mhardy6647 Posts: 33,027
    edited November 2019
    Options
    mrbiron wrote: »
    My wife just erased my review by closing out a tab on my iPad. :'(

    Now I will start over again...

    paging @Hermitism
    We need a badge for that! :/


    EDIT: Check that. "We've" got one...

    eup3e6l3n527.jpg

  • EndersShadow
    EndersShadow Posts: 17,528
    Options
    @mhardy6647
    Actually two

    noqshjh3l2x9.jpg
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • smglbrth
    smglbrth Posts: 1,460
    Options
    Not much info from the "walnut" crowd, guess the black ash speakers sound better, ha!
    Remember, when you're running from something, you're running to something...-me
  • mhardy6647
    mhardy6647 Posts: 33,027
    Options
    @mhardy6647
    Actually two

    noqshjh3l2x9.jpg

    well played.

    :)
  • F1nut
    F1nut Posts: 49,789
    Options
    K_M wrote: »
    mhardy6647 wrote: »
    K_M wrote: »
    mhardy6647 wrote: »
    They aren't my idea of an easy load on the bases of those two parameters*... but I
    (ahem, still) wanna see the actual measured impedance curve to see if they're really gas guzzlers or just geared kinda tall, so to speak :)

    _______________
    * it might be recalled that my daily drivers are ca. 104 dB/watt at 1 meter at nominally 16 ohms

    But of course, phase angles determine how much of a load it is also, not just pure impedance.

    Part and parcel of the standard impedance plot.
    I assume(d) that everyone here who is interested in the issue of a loudspeaker as an amplifier load understands that.

    In the DIY speaker forums we frequent, yes for sure, but in here, I tend to see a lot less in depth knowledge of speaker parameters and design.

    Peculiar claim since you have never provided any technical info even when requested.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • Kex
    Kex Posts: 4,926
    Options
    mrbiron wrote: »
    My wife just erased my review by closing out a tab on my iPad. :'(

    Now I will start over again...
    This time, write it out in the Notes app, or Pages app, before finalizing and posting. It’s advisable for anything longer than a few paragraphs!
    Alea jacta est!
  • mrbiron
    mrbiron Posts: 5,711
    Options
    Kex wrote: »
    mrbiron wrote: »
    My wife just erased my review by closing out a tab on my iPad. :'(

    Now I will start over again...
    This time, write it out in the Notes app, or Pages app, before finalizing and posting. It’s advisable for anything longer than a few paragraphs!

    Solution #2
    Bludgeoning with iPad. It might not be the best, but it will make me feel better.
    Where’s the KABOOM?!?! There’s supposed to be an Earth shattering KABOOM!!!
  • EndersShadow
    EndersShadow Posts: 17,528
    Options
    mrbiron wrote: »
    Kex wrote: »
    mrbiron wrote: »
    My wife just erased my review by closing out a tab on my iPad. :'(

    Now I will start over again...
    This time, write it out in the Notes app, or Pages app, before finalizing and posting. It’s advisable for anything longer than a few paragraphs!

    Solution #2
    Bludgeoning with iPad. It might not be the best, but it will make me feel better.

    Yeah, but your not built for jail........ which is where us "not rich" folks end up after a manslaughter charge.....
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • tonyb
    tonyb Posts: 32,906
    Options
    K_M wrote: »
    mhardy6647 wrote: »
    K_M wrote: »
    mhardy6647 wrote: »
    They aren't my idea of an easy load on the bases of those two parameters*... but I
    (ahem, still) wanna see the actual measured impedance curve to see if they're really gas guzzlers or just geared kinda tall, so to speak :)

    _______________
    * it might be recalled that my daily drivers are ca. 104 dB/watt at 1 meter at nominally 16 ohms

    But of course, phase angles determine how much of a load it is also, not just pure impedance.

    Part and parcel of the standard impedance plot.
    I assume(d) that everyone here who is interested in the issue of a loudspeaker as an amplifier load understands that.

    In the DIY speaker forums we frequent, yes for sure, but in here, I tend to see a lot less in depth knowledge of speaker parameters and design.

    Your kidding right ? There's people here who know that stuff upside down and backwards. However, very few, who are not into DIY, want to know those things. Most anyone cares about is quality and sound, maybe aesthetics too, because those are the determining factors of buying a speaker, or not, for most people.
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's
  • dromunds
    dromunds Posts: 9,981
    Options
    mrbiron wrote: »
    My wife just erased my review by closing out a tab on my iPad. :'(

    Now I will start over again...

    Dude, don't feel bad, almost the same thing happened to me - except it was nobody's fault but mine. I was using my ipad for the first time for anything but websurfing - and I ended up wiping out my entire review in somewhat the same manner as you mention your wife did to yours - but in my case it was what I can only describe as a cross between a spaz attack and the complete obliteration of brain function. I always used my Dell laptop for word processing but for some reason known only to the underworld I decided to write the review this time on my ipad - even tho I had no idea what I was doing on an ipad. I "F-bombed" the world and all God's innocent creations more times that I dare to admit. Had to re-write the whole review. The good thing is - your review should be even better the second time. >:)
  • Jstas
    Jstas Posts: 14,712
    Options
    I got a lot to say here but need some time to write it all down and get my thoughts straight. I'm meeting up with gmcman tonight to pass them off to him. Would go grab a beer and a bite but he's passing through on work and won't have time.

    Either way, I'll be jabbering about them soon much to all y'all's chagrin....I'm lookin' at you, @pitdogg2 , ya frickin' crybaby havin' to read words and stuff.

    Maybe I'll put it together for F1nut to read for you in an audiobook.
    Expert Moron Extraordinaire

    You're just jealous 'cause the voices don't talk to you!
  • mhardy6647
    mhardy6647 Posts: 33,027
    Options
    Just 'save your work' -- don't be an @mrbiron. ;)

    (this is good-natured ribbing, @mrbiron! Really...)

    :#

  • mrbiron
    mrbiron Posts: 5,711
    Options
    mhardy6647 wrote: »
    Just 'save your work' -- don't be an @mrbiron. ;)

    (this is good-natured ribbing, @mrbiron! Really...)

    :#
    I know where you live!
    Fortunately for you, I don’t know when I will have time to Drop by for a...
    stabbing

    :D
    Where’s the KABOOM?!?! There’s supposed to be an Earth shattering KABOOM!!!
  • mhardy6647
    mhardy6647 Posts: 33,027
    Options
    :)

    I will succumb to old age first, based on past performance. :|

    There's an Amp Camp Amp just waitin' for you to stop by, y'know? :)

  • mrbiron
    mrbiron Posts: 5,711
    Options
    I know, I know.
    Try not to point out all of my flaws. I leave that job for my wife. ;)
    Where’s the KABOOM?!?! There’s supposed to be an Earth shattering KABOOM!!!
  • F1nut
    F1nut Posts: 49,789
    Options
    Jstas wrote: »
    I got a lot to say here but need some time to write it all down and get my thoughts straight. I'm meeting up with gmcman tonight to pass them off to him. Would go grab a beer and a bite but he's passing through on work and won't have time.

    Either way, I'll be jabbering about them soon much to all y'all's chagrin....I'm lookin' at you, @pitdogg2 , ya frickin' crybaby havin' to read words and stuff.

    Maybe I'll put it together for F1nut to read for you in an audiobook.

    Good gawd man, don't do that to me.....
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • pitdogg2
    pitdogg2 Posts: 24,553
    Options
    F1nut wrote: »
    Jstas wrote: »
    I got a lot to say here but need some time to write it all down and get my thoughts straight. I'm meeting up with gmcman tonight to pass them off to him. Would go grab a beer and a bite but he's passing through on work and won't have time.

    Either way, I'll be jabbering about them soon much to all y'all's chagrin....I'm lookin' at you, @pitdogg2 , ya frickin' crybaby havin' to read words and stuff.

    Maybe I'll put it together for F1nut to read for you in an audiobook.

    Good gawd man, don't do that to me.....

    no vowels please B)
  • Jstas
    Jstas Posts: 14,712
    Options
    Disemvowel, got it.

    Easy enough. There's an app for that!

    https://nmichaels.org/dsmvwl.py
    Expert Moron Extraordinaire

    You're just jealous 'cause the voices don't talk to you!
  • gmcman
    gmcman Posts: 1,754
    Options
    I'm going to send my review to @dromunds and let him translate it.... :p
  • ZLTFUL
    ZLTFUL Posts: 5,640
    Options
    Just for the sake of disclosure, I just sent the L200s on to their next victim, @tonyb

    I have a very busy day today with work and personal stuff but will be working on my review and comparison tomorrow.
    "Some people find it easier to be conceited rather than correct."

    "Unwad those panties and have a good time man. We're all here to help each other, no matter how it might appear." DSkip