Interconnect cables, where best cables are more important?

cortico
cortico Posts: 587
in Basic Hookup/Wiring Questions
I have a few different grades os RCA interconnect cables.
Just wondering, where should the best cables be places to get the best SQ.

1- Dac>Pre amplifier
2- Phono preamp>Pre amplifier
3- Preamp>Power amplifier

What would be the priority and why?
· Share on TwitterShare on Facebook

Comments

  • kharp1
    kharp1 Posts: 3,453
    This is just me, but, I think if you believe that cables make a difference (and I do) then they're all important. Trial and error as far as placement.
    · Share on TwitterShare on Facebook
  • joecoulson
    joecoulson Posts: 4,944
    I agree Kerry and I also agree Skip (amazingly) that replace source-pre-amp with the same brand/type of cables as not to confuse things and get away from cable differences and just focus on source/component differences.
    · Share on TwitterShare on Facebook
  • cortico
    cortico Posts: 587
    edited May 2019
    Thanks folks! I notice a cumulative effect with the cables; the more I add the better it sounds. The speaker cables made big difference, so did the pre to power amp. I am thinking that upgrading all source cables with matching MIT wire is a no-brainer to me...
    · Share on TwitterShare on Facebook
  • Clipdat
    Clipdat Posts: 10,952
    Once you go MIT you never go back!

    Oh wait, I did. Nevermind.
    · Share on TwitterShare on Facebook
  • F1nut
    F1nut Posts: 47,073
    Clipdat wrote: »
    Once you go MIT you never go back!

    Oh wait, I did. Nevermind.

    There's no accounting for your tastes.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on TwitterShare on Facebook
  • daddyjt
    daddyjt Posts: 1,611
    I agree that they are all important, but if you can only do one at a time, I would start with the lowest level signal first, as they are most susceptible to interference and/or distortion.
    "Conservative Libertarians love the country, progressive leftists love the government." - Andrew Wilkow


    “Human beings are born with different capacities. If they are free, they are not equal. And if they are equal, they are not free.”
    ― Aleksandr Solzhenitsyn

    · Share on TwitterShare on Facebook
  • tophatjohnny
    tophatjohnny Posts: 3,452
    edited May 2019
    This forum made me a believer, and while I never doubted the subject "Cables Matter" I never gave it real thought before Club Polk. There are a lot of great choices and trial and error will help only you to decide what your ears are hearing and which ever you decide on will be your best choice because you made that choice. ears don't lie.......they do get old though!!!! lol
    "if it's not fun, it's not worth it & remember folks, "It's All About The Music"!!
    *****************************
    · Share on TwitterShare on Facebook
  • verb
    verb Posts: 10,021
    tophatjohnny wrote: »
    This forum made me a believer, and while I never doubted the subject "Cables Matter" I never gave it real thought before Club Polk. There are a lot of great choices and trial and error will help only you to decide what your ears are hearing and which ever you decide on will be your best choice because you made that choice. ears don't lie.......they do get old though!!!! lol

    Me too brother! I've come a long way since my home brew 12ga stranded wire speaker cables to the MIT Shotgun's!

    Even going from the MIT T2 to the Shotgun's was a huge improvement!
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
    · Share on TwitterShare on Facebook
  • cortico
    cortico Posts: 587
    edited May 2019
    Ah, you fellas make the mortal people feel like no matter what is done we will be condemn to mediocre performance.

    Just got a shotgun s1 interconnects, placed it between Pre and power, moved the T2 for the sources...

    Ok, say it! you just tried something else and the shotguns are [email protected] :D

    Kidding aside, sound got mellowed out, more definition, and dimension, I think.

    Finally can enjoy some recordings I though were bad...
    · Share on TwitterShare on Facebook
  • F1nut
    F1nut Posts: 47,073
    Try them between your source and pre. Then find another pair of S1's. Make sure you select the proper impedance setting.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on TwitterShare on Facebook
  • cortico
    cortico Posts: 587
    Sure thing. Pre has 30kOhms input impedance on unbalanced inputs and power amp100kOhms. Low impedance setting for the Pre, and Mid or Hight for the Power.
    · Share on TwitterShare on Facebook
  • cortico
    cortico Posts: 587
    Pre sounds best on low and power amp on mid impedance setting....
    · Share on TwitterShare on Facebook
  • BlueFox
    BlueFox Posts: 15,240
    That should be how you determine where the cable(s) go. Where they sound best. Of course, at some point you need to get a loom of the same cables between all components, including speakers.
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on TwitterShare on Facebook
  • cortico
    cortico Posts: 587
    Stellar performance! missing a matching interconnect between phono pre and preamp, and a good digital coax between CD player and DAC...
    · Share on TwitterShare on Facebook
  • vishma112
    vishma112 Posts: 5
    Thanks for sharing valuable information.It will help everyone.keep Post.
    <a href="https://lottoloots.com/kerala-lottery-guessing/">Kerala Lottery guessing</a>
    · Share on TwitterShare on Facebook
  • mhardy6647
    mhardy6647 Posts: 29,769
    Spam-o-rama -- and using HTML instead of BB code.
    What is this world coming to?



    · Share on TwitterShare on Facebook