Interconnect cables, where best cables are more important?

I have a few different grades os RCA interconnect cables.
Just wondering, where should the best cables be places to get the best SQ.

1- Dac>Pre amplifier
2- Phono preamp>Pre amplifier
3- Preamp>Power amplifier

What would be the priority and why?

Comments

  • kharp1kharp1 Posts: 3,463
    This is just me, but, I think if you believe that cables make a difference (and I do) then they're all important. Trial and error as far as placement.
  • joecoulsonjoecoulson Posts: 4,885
    I agree Kerry and I also agree Skip (amazingly) that replace source-pre-amp with the same brand/type of cables as not to confuse things and get away from cable differences and just focus on source/component differences.
    Auralic Vega G1/Rega TT - Parasound P6 - Parasound A21+ - Elac Adante AS-61 - AQ Niagara 5000 - SVS SB16u

    HT - Panasonic BDP/Tivo Bolt - Marantz SR5013 - Def tech C and In ceiling - Sony XBR 75"
  • corticocortico Posts: 594
    edited May 2019
    Thanks folks! I notice a cumulative effect with the cables; the more I add the better it sounds. The speaker cables made big difference, so did the pre to power amp. I am thinking that upgrading all source cables with matching MIT wire is a no-brainer to me...
  • ClipdatClipdat Posts: 8,750
    Once you go MIT you never go back!

    Oh wait, I did. Nevermind.
  • F1nutF1nut Posts: 45,049
    Clipdat wrote: »
    Once you go MIT you never go back!

    Oh wait, I did. Nevermind.

    There's no accounting for your tastes.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • daddyjtdaddyjt Posts: 1,494
    I agree that they are all important, but if you can only do one at a time, I would start with the lowest level signal first, as they are most susceptible to interference and/or distortion.
  • tophatjohnnytophatjohnny Posts: 3,067
    edited May 2019
    This forum made me a believer, and while I never doubted the subject "Cables Matter" I never gave it real thought before Club Polk. There are a lot of great choices and trial and error will help only you to decide what your ears are hearing and which ever you decide on will be your best choice because you made that choice. ears don't lie.......they do get old though!!!! lol
    "if it's not fun, it's not worth it & remember folks, "It's All About The Music"!!
    *****************************
  • verbverb Posts: 10,276
    This forum made me a believer, and while I never doubted the subject "Cables Matter" I never gave it real thought before Club Polk. There are a lot of great choices and trial and error will help only you to decide what your ears are hearing and which ever you decide on will be your best choice because you made that choice. ears don't lie.......they do get old though!!!! lol

    Me too brother! I've come a long way since my home brew 12ga stranded wire speaker cables to the MIT Shotgun's!

    Even going from the MIT T2 to the Shotgun's was a huge improvement!
    Basement: Polk SDA SRS, Cary SLP-05 Pre with ultimate upgrade,Enlightened Audio Designs CD Transport, Northstar Designs Excelsio DAC, Cambridge 851N streamer, Marantz SA-14 SACD, McIntosh MC300 Amp, Silnote Morpheus Ref2 Digital Cables, Furman 15PFi Power Conditioner, Pangea Power Cables, Wireworld Oasis 8 RCA IC's, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, PASS ACA Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Antique Sound Labs Wave AV-8 Monoblocks, Tisbury Mini Passive Pre, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
  • corticocortico Posts: 594
    edited May 2019
    Ah, you fellas make the mortal people feel like no matter what is done we will be condemn to mediocre performance.

    Just got a shotgun s1 interconnects, placed it between Pre and power, moved the T2 for the sources...

    Ok, say it! you just tried something else and the shotguns are [email protected] :D

    Kidding aside, sound got mellowed out, more definition, and dimension, I think.

    Finally can enjoy some recordings I though were bad...
  • F1nutF1nut Posts: 45,049
    Try them between your source and pre. Then find another pair of S1's. Make sure you select the proper impedance setting.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • corticocortico Posts: 594
    Sure thing. Pre has 30kOhms input impedance on unbalanced inputs and power amp100kOhms. Low impedance setting for the Pre, and Mid or Hight for the Power.
  • corticocortico Posts: 594
    Pre sounds best on low and power amp on mid impedance setting....
  • BlueFoxBlueFox Posts: 13,796
    That should be how you determine where the cable(s) go. Where they sound best. Of course, at some point you need to get a loom of the same cables between all components, including speakers.
    Bud - Silicon Valley

    Lumin X1 file player
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR on preamp, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • corticocortico Posts: 594
    Stellar performance! missing a matching interconnect between phono pre and preamp, and a good digital coax between CD player and DAC...
  • vishma112vishma112 Posts: 5
    Thanks for sharing valuable information.It will help everyone.keep Post.
    <a href="https://lottoloots.com/kerala-lottery-guessing/">Kerala Lottery guessing</a>
  • mhardy6647mhardy6647 Posts: 26,285
    Spam-o-rama -- and using HTML instead of BB code.
    What is this world coming to?



Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!