Group-buy-2019-dreadnought-avel-lindberg-1000va-isolation-transformers

11113151617

Comments

  • ThomasD
    ThomasD Posts: 260
    @vcwatkins Generous offer but You certainly cannot be held accountable for the delay in production. No issue's waiting here as I'm still looking for SDA's that can use it. All good.
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, 4070, 1030, APPJ 2013, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Monitor 7cTL's, SDA CRS's, 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • monepolk
    monepolk Posts: 1,140
    I have no problem waiting.
  • erniejade
    erniejade Posts: 6,288
    ThomasD wrote: »
    @vcwatkins Generous offer but You certainly cannot be held accountable for the delay in production. No issue's waiting here as I'm still looking for SDA's that can use it. All good.

    +1 on this.
    Musical Fidelity Tri-Vista 300, Audioquest Thunderbird Zero Speaker Cable, Tyler Highland H2, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
  • pitdogg2
    pitdogg2 Posts: 24,474
    No worries here either.
  • honestaquarian
    honestaquarian Posts: 3,186
    lightman1 wrote: »
    I don't even know where my speakers are. This will give me a chance to track them down.....

    Uuuhhh Russ WHICH ONES??? (ya got pairs all over the blessed country!)😝😂🤣
  • pitdogg2
    pitdogg2 Posts: 24,474
    lightman1 wrote: »
    I don't even know where my speakers are. This will give me a chance to track them down.....

    You really should lojack your stuff.....
  • indyhawg
    indyhawg Posts: 1,633
    Craig--Thanks for following up on this. I can wait until June.
  • ken brydson
    ken brydson Posts: 8,638
    lightman1 wrote: »
    I don't even know where my speakers are. This will give me a chance to track them down.....

    I didn't take them, nobody saw me take them, you can't prove anything- Bart Simpson
  • daddyjt
    daddyjt Posts: 2,305
    erniejade wrote: »
    ThomasD wrote: »
    @vcwatkins Generous offer but You certainly cannot be held accountable for the delay in production. No issue's waiting here as I'm still looking for SDA's that can use it. All good.

    +1 on this.

    +2
    "Conservative Libertarians love the country, progressive leftists love the government." - Andrew Wilkow


    “Human beings are born with different capacities. If they are free, they are not equal. And if they are equal, they are not free.”
    ― Aleksandr Solzhenitsyn

  • verb
    verb Posts: 10,176
    vcwatkins wrote: »
    I'm afraid the news is not good:

    cqz0xrn3px0b.jpg
    50% longer production time, sigh. Since this is a dramatically different deal than what group members were buying into, I will buy out any members who are not willing to wait until mid-June. Please PM me if you want out.

    So sorry about this guys,

    Craig

    No worries Craig! I was just thinking about em the other day. I know you got it handled.

    Incident at the factory? Interesting. Wonder if there was smoke? Maybe a monoprice amp was involved? :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • gudnoyez
    gudnoyez Posts: 8,056
    I have no problems waiting got a lot going on, busy with yard work, getting a NAS set up and picking out a Streamer, get a lot of biking and fishing in before the heat and humidity arrives. The middle of June will be here before I get all the stuff done I need to do anyways.
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
  • Toolfan66
    Toolfan66 Posts: 16,834
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..
  • pitdogg2
    pitdogg2 Posts: 24,474
    Toolfan66 wrote: »
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..

    Hopefully the middle one survived
    :s:s


    That's terrible
  • Toolfan66
    Toolfan66 Posts: 16,834

    pitdogg2 wrote: »
    Toolfan66 wrote: »
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..

    Hopefully the middle one survived
    :s:s


    That's terrible

    Nope, only his pinky and thumb..

  • F1nut
    F1nut Posts: 49,708
    Ouch!
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • nooshinjohn
    nooshinjohn Posts: 25,034
    Toolfan66 wrote: »
    pitdogg2 wrote: »
    Toolfan66 wrote: »
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..

    Hopefully the middle one survived
    :s:s


    That's terrible

    Nope, only his pinky and thumb..

    Couldn't be reattached?
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
  • Manticore
    Manticore Posts: 408
    Ouch indeed! I would think losing a thumb is the absolute worst. Hope he going to be OK.
    Denon AVR X4200W
    Parasound A23 amplifier
    Parasound A23 amplifier
    LG 65" Ultra HD4k
    LG 4kBR - UP970
    Denon DVM 4800
    Denon DP 3000 turntable
    Saec 308sx tonearm w/
    Dynavector 10x5 cart
    Vincent PHO 701 Phono Preamp
    MIT Avt3 Speaker c's
    Audio Quest Big Sur ic's
    Polk SDA 1C's modded
    Polk LSim 707
    Polk LSiM706c
    Polk RTiA 3's
    Polk 80F/X-RT
    Polk DSW PRO 440wi sub
    Infinity bu2 sub
    "The early Klingon gets the Gagh"
  • Toolfan66
    Toolfan66 Posts: 16,834
    Toolfan66 wrote: »
    pitdogg2 wrote: »
    Toolfan66 wrote: »
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..

    Hopefully the middle one survived
    :s:s


    That's terrible

    Nope, only his pinky and thumb..

    Couldn't be reattached?

    No, it crushed the fingers, I feel bad for the guy, he has been running the machine for over a year, when you watch the video it was just him not watching where his fingers were at..

  • pitdogg2
    pitdogg2 Posts: 24,474
    Yea I made a joke earlier and it's not a laughing matter at all. Whether getting maimed or losing parts it's bad no two ways about it.
  • verb
    verb Posts: 10,176
    audioluvr wrote: »
    Getting ready! Just built the Wireworld Mini- Eclipse interconnect cables. Come on A/L!

    k80b2u91wzfc.jpeg

    Sweet! Nice job brah! :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • pitdogg2
    pitdogg2 Posts: 24,474
    Yea kind of jealous myself....
    Sweet.
  • F1nut
    F1nut Posts: 49,708
    Toolfan66 wrote: »
    Toolfan66 wrote: »
    pitdogg2 wrote: »
    Toolfan66 wrote: »
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..

    Hopefully the middle one survived
    :s:s


    That's terrible

    Nope, only his pinky and thumb..

    Couldn't be reattached?

    No, it crushed the fingers, I feel bad for the guy, he has been running the machine for over a year, when you watch the video it was just him not watching where his fingers were at..

    I worked construction one summer when I was like 19. Old carpenter dude cut off 2 fingers with his circular saw not paying attention. We called him 3 finger Oak.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • ThomasD
    ThomasD Posts: 260


    "I worked construction one summer when I was like 19. Old carpenter dude cut off 2 fingers with his circular saw not paying attention. We called him 3 finger Oak."

    Working in Arizona several years ago and had a tradesman of 'Spanish' descent cutting big 24" square tile and he evidently got distracted and lopped off a thumb & forefinger. Thereafter known as 'Three Fingers Tequila". He was pretty good natured about the nickname but man that would bite big time!
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, 4070, 1030, APPJ 2013, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Monitor 7cTL's, SDA CRS's, 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • audioluvr
    audioluvr Posts: 5,420
    I've been lucky all these years working around saws. Not so much with my power nailer. Hit a knot and had a 16 penny nail make a right turn into my thumb. broke the bone and made it useless for months.
    Gustard X26 Pro DAC
    Belles 21A Pre modded with Mundorf Supreme caps
    B&K M200 Sonata monoblocks refreshed and upgraded
    Polk SDA 1C's modded / 1000Va Dreadnaught
    Wireworld Silver Eclipse IC's and speaker cables
    Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)


    There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus
  • ThomasD
    ThomasD Posts: 260
    audioluvr wrote: »
    I've been lucky all these years working around saws. Not so much with my power nailer. Hit a knot and had a 16 penny nail make a right turn into my thumb. broke the bone and made it useless for months.

    The stories we could tell being in trades & construction....... For a different thread though.
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, 4070, 1030, APPJ 2013, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Monitor 7cTL's, SDA CRS's, 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • nooshinjohn
    nooshinjohn Posts: 25,034
    Amateurs... when I want to mess up my fingers, I chose the fan blades of an F/A-18... almost lost the tips of 4 of them at the joints.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
  • gmcman
    gmcman Posts: 1,739
    Amateurs... when I want to mess up my fingers, I chose the fan blades of an F/A-18...everyone else was too scared to check the blade tip clearance while the engine was running ...almost lost the tips of 4 of them at the joints.

    Fixed.

    B)
  • Toolfan66
    Toolfan66 Posts: 16,834
    edited June 2019