Group-buy-2019-dreadnought-avel-lindberg-1000va-isolation-transformers

11113151617

Comments

  • ThomasD
    ThomasD Posts: 260
    @vcwatkins Generous offer but You certainly cannot be held accountable for the delay in production. No issue's waiting here as I'm still looking for SDA's that can use it. All good.
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, 4070, 1030, APPJ 2013, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Monitor 7cTL's, SDA CRS's, 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • monepolk
    monepolk Posts: 1,114
    I have no problem waiting.
  • erniejade
    erniejade Posts: 5,558
    ThomasD wrote: »
    @vcwatkins Generous offer but You certainly cannot be held accountable for the delay in production. No issue's waiting here as I'm still looking for SDA's that can use it. All good.

    +1 on this.
    Den: Lumin D1,Wireworld Silver Eclipse RCA, KEF LS50 Wireless, Velodyne SPL1200, Technics 1200, Denon DL160, Jolida D9,

    Living Room:,T+A PA 1530R,Wireworld Silver Eclipse SC, Tyler Highland H2, High Fidelity Reveal RCA, Innuos Zen MK3 , W4S recovery, LKS MH-da004,

    Have but haven't used in a while: LH Labs VI Dac, Cayin SCD50T, Grant Fidelity Tube Dac11,Aries Mini
  • pitdogg2
    pitdogg2 Posts: 18,546
    No worries here either.
  • honestaquarian
    honestaquarian Posts: 2,973
    lightman1 wrote: »
    I don't even know where my speakers are. This will give me a chance to track them down.....

    Uuuhhh Russ WHICH ONES??? (ya got pairs all over the blessed country!)😝😂🤣
  • pitdogg2
    pitdogg2 Posts: 18,546
    lightman1 wrote: »
    I don't even know where my speakers are. This will give me a chance to track them down.....

    You really should lojack your stuff.....
  • indyhawg
    indyhawg Posts: 1,559
    Craig--Thanks for following up on this. I can wait until June.
  • ken brydson
    ken brydson Posts: 8,022
    lightman1 wrote: »
    I don't even know where my speakers are. This will give me a chance to track them down.....

    I didn't take them, nobody saw me take them, you can't prove anything- Bart Simpson
  • daddyjt
    daddyjt Posts: 1,433
    erniejade wrote: »
    ThomasD wrote: »
    @vcwatkins Generous offer but You certainly cannot be held accountable for the delay in production. No issue's waiting here as I'm still looking for SDA's that can use it. All good.

    +1 on this.

    +2

    “Human beings are born with different capacities. If they are free, they are not equal. And if they are equal, they are not free.”
    ― Aleksandr Solzhenitsyn
  • verb
    verb Posts: 9,809
    vcwatkins wrote: »
    I'm afraid the news is not good:

    cqz0xrn3px0b.jpg
    50% longer production time, sigh. Since this is a dramatically different deal than what group members were buying into, I will buy out any members who are not willing to wait until mid-June. Please PM me if you want out.

    So sorry about this guys,

    Craig

    No worries Craig! I was just thinking about em the other day. I know you got it handled.

    Incident at the factory? Interesting. Wonder if there was smoke? Maybe a monoprice amp was involved? :smile:
    Basement: Polk SDA SRS, Cary SLP-05 Pre with ultimate upgrade,Enlightened Audio Designs CD Transport, Northstar Designs Excelsio DAC, Cambridge 851N streamer, Marantz SA-14 SACD, McIntosh MC300 Amp, Silnote Morpheus Ref2 Digital Cables, Furman 15PFi Power Conditioner, Pangea Power Cables, Wireworld Oasis 8 RCA IC's, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, PASS ACA Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Antique Sound Labs Wave AV-8 Monoblocks, Tisbury Mini Passive Pre, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
  • gudnoyez
    gudnoyez Posts: 7,645
    I have no problems waiting got a lot going on, busy with yard work, getting a NAS set up and picking out a Streamer, get a lot of biking and fishing in before the heat and humidity arrives. The middle of June will be here before I get all the stuff done I need to do anyways.
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
  • Toolfan66
    Toolfan66 Posts: 14,603
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..
  • pitdogg2
    pitdogg2 Posts: 18,546
    Toolfan66 wrote: »
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..

    Hopefully the middle one survived
    :s:s


    That's terrible
  • Toolfan66
    Toolfan66 Posts: 14,603

    pitdogg2 wrote: »
    Toolfan66 wrote: »
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..

    Hopefully the middle one survived
    :s:s


    That's terrible

    Nope, only his pinky and thumb..

  • F1nut
    F1nut Posts: 45,744
    Ouch!
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • nooshinjohn
    nooshinjohn Posts: 22,907
    Toolfan66 wrote: »
    pitdogg2 wrote: »
    Toolfan66 wrote: »
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..

    Hopefully the middle one survived
    :s:s


    That's terrible

    Nope, only his pinky and thumb..

    Couldn't be reattached?
    The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Statement V2 cartridge and Origin Conqueror Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Pioneer Elite SC-LX701, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB800 "in-wall" surrounds.

    “Every record has been destroyed or falsified, every book has been rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered…History has stopped. Nothing exists except the endless present in which the party is always right” — George Orwell

    “If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
  • Manticore
    Manticore Posts: 408
    Ouch indeed! I would think losing a thumb is the absolute worst. Hope he going to be OK.
    Denon AVR X4200W
    Parasound A23 amplifier
    Parasound A23 amplifier
    LG 65" Ultra HD4k
    LG 4kBR - UP970
    Denon DVM 4800
    Denon DP 3000 turntable
    Saec 308sx tonearm w/
    Dynavector 10x5 cart
    Vincent PHO 701 Phono Preamp
    MIT Avt3 Speaker c's
    Audio Quest Big Sur ic's
    Polk SDA 1C's modded
    Polk LSim 707
    Polk LSiM706c
    Polk RTiA 3's
    Polk 80F/X-RT
    Polk DSW PRO 440wi sub
    Infinity bu2 sub
    "The early Klingon gets the Gagh"
  • Toolfan66
    Toolfan66 Posts: 14,603
    Toolfan66 wrote: »
    pitdogg2 wrote: »
    Toolfan66 wrote: »
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..

    Hopefully the middle one survived
    :s:s


    That's terrible

    Nope, only his pinky and thumb..

    Couldn't be reattached?

    No, it crushed the fingers, I feel bad for the guy, he has been running the machine for over a year, when you watch the video it was just him not watching where his fingers were at..

  • pitdogg2
    pitdogg2 Posts: 18,546
    Yea I made a joke earlier and it's not a laughing matter at all. Whether getting maimed or losing parts it's bad no two ways about it.
  • verb
    verb Posts: 9,809
    audioluvr wrote: »
    Getting ready! Just built the Wireworld Mini- Eclipse interconnect cables. Come on A/L!

    k80b2u91wzfc.jpeg

    Sweet! Nice job brah! :smile:
    Basement: Polk SDA SRS, Cary SLP-05 Pre with ultimate upgrade,Enlightened Audio Designs CD Transport, Northstar Designs Excelsio DAC, Cambridge 851N streamer, Marantz SA-14 SACD, McIntosh MC300 Amp, Silnote Morpheus Ref2 Digital Cables, Furman 15PFi Power Conditioner, Pangea Power Cables, Wireworld Oasis 8 RCA IC's, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, PASS ACA Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Antique Sound Labs Wave AV-8 Monoblocks, Tisbury Mini Passive Pre, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
  • pitdogg2
    pitdogg2 Posts: 18,546
    Yea kind of jealous myself....
    Sweet.
  • F1nut
    F1nut Posts: 45,744
    Toolfan66 wrote: »
    Toolfan66 wrote: »
    pitdogg2 wrote: »
    Toolfan66 wrote: »
    We had a guy loose three fingers at the shop just a few weeks ago, it has taken a toll on our production..

    Hopefully the middle one survived
    :s:s


    That's terrible

    Nope, only his pinky and thumb..

    Couldn't be reattached?

    No, it crushed the fingers, I feel bad for the guy, he has been running the machine for over a year, when you watch the video it was just him not watching where his fingers were at..

    I worked construction one summer when I was like 19. Old carpenter dude cut off 2 fingers with his circular saw not paying attention. We called him 3 finger Oak.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • ThomasD
    ThomasD Posts: 260


    "I worked construction one summer when I was like 19. Old carpenter dude cut off 2 fingers with his circular saw not paying attention. We called him 3 finger Oak."

    Working in Arizona several years ago and had a tradesman of 'Spanish' descent cutting big 24" square tile and he evidently got distracted and lopped off a thumb & forefinger. Thereafter known as 'Three Fingers Tequila". He was pretty good natured about the nickname but man that would bite big time!
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, 4070, 1030, APPJ 2013, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Monitor 7cTL's, SDA CRS's, 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • audioluvr
    audioluvr Posts: 3,310
    I've been lucky all these years working around saws. Not so much with my power nailer. Hit a knot and had a 16 penny nail make a right turn into my thumb. broke the bone and made it useless for months.
    Cambridge Audio 851N Streamer/DAC
    Belles 21A Pre modded with Mundorf Supreme caps
    B&K M200 Sonata monoblocks refreshed and upgraded
    Belles 350A Reference modded with Mundorf Supreme caps
    Polk SDA 1C's modded / 1000Va Dreadnaught
    Wireworld Silver Eclipse IC's and speaker cables


    There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January.

    by Dr. Sardonicus
  • ThomasD
    ThomasD Posts: 260
    audioluvr wrote: »
    I've been lucky all these years working around saws. Not so much with my power nailer. Hit a knot and had a 16 penny nail make a right turn into my thumb. broke the bone and made it useless for months.

    The stories we could tell being in trades & construction....... For a different thread though.
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, 4070, 1030, APPJ 2013, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Monitor 7cTL's, SDA CRS's, 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • nooshinjohn
    nooshinjohn Posts: 22,907
    Amateurs... when I want to mess up my fingers, I chose the fan blades of an F/A-18... almost lost the tips of 4 of them at the joints.
    The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Statement V2 cartridge and Origin Conqueror Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Pioneer Elite SC-LX701, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB800 "in-wall" surrounds.

    “Every record has been destroyed or falsified, every book has been rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered…History has stopped. Nothing exists except the endless present in which the party is always right” — George Orwell

    “If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
  • gmcman
    gmcman Posts: 1,616
    Amateurs... when I want to mess up my fingers, I chose the fan blades of an F/A-18...everyone else was too scared to check the blade tip clearance while the engine was running ...almost lost the tips of 4 of them at the joints.

    Fixed.

    B)
  • Toolfan66
    Toolfan66 Posts: 14,603
    edited June 2019
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!