Dreadnought Case Interest Check...

So with the Group-buy-2019-dreadnought-avel-lindberg-1000va-isolation-transformers I figured I would start a new thread to see who is all going to be wanting one, and see if it's going to be worth running them, I will do my best to keep the same cost as the last runs, but aluminum has gone up since the tariffs as well as Black Anodizing that I would use for the side panels..

My thought is if cost becomes an issue, and to keep cost down we could cut out the Black Anodizing for the side panels and just Powder Coat them a Smooth Black, and keep the case a Texture Black, that way we still have the contrast with the two colors, let me know your thoughts on this, if everyone is okay with this it shouldn't be a problem on cost as I can have the powder done in house, and cut out the outside process..

The cost on the last run's was $100 shipped...




Reminder: If you already have one of my cases, they fit both the 800va and the 1000va, so if you are just upgrading to the 1000va there is no need to buy another case if you don't want to...
«13

Comments

  • pitdogg2
    pitdogg2 Posts: 24,471
    edited January 2019
    Count me in Larry.
    Thanks for your time and expertise

    I'm good with the powder coat to keep cost down as well.
  • BC6
    BC6 Posts: 109
    I'm in. Thanks!
    2 Channel: Atohm GT-1 speakers, Atoll IN400 integrated amp, PS Audio DirectStream DAC, PS Audio NuWave Phono Converter, Pro-Ject Debut Carbon Esprit SB with Ortofon Bronze cartridge, SotM sMS-200 ultra streamer, SotM sPS-500 power supply, and homemade infinite baffle subwoofer with two Fi Audio IB318 drivers.

    HT: All Polk: SDA 2.3tl fronts, CSiA6 center, 500-LS ceiling, RT/FX, RTi8, Monitor 4 rears, plus Yamaha CX-a5100 AV Preamplifier/Processor, Yamaha MX-a5000 11.1 channel amplifier, and Sony XBR55-AE1 OLED TV.
  • Manticore
    Manticore Posts: 408
    Count me in also. Black Anodized sounds great!! Either way in.
    Denon AVR X4200W
    Parasound A23 amplifier
    Parasound A23 amplifier
    LG 65" Ultra HD4k
    LG 4kBR - UP970
    Denon DVM 4800
    Denon DP 3000 turntable
    Saec 308sx tonearm w/
    Dynavector 10x5 cart
    Vincent PHO 701 Phono Preamp
    MIT Avt3 Speaker c's
    Audio Quest Big Sur ic's
    Polk SDA 1C's modded
    Polk LSim 707
    Polk LSiM706c
    Polk RTiA 3's
    Polk 80F/X-RT
    Polk DSW PRO 440wi sub
    Infinity bu2 sub
    "The early Klingon gets the Gagh"
  • ThomasD
    ThomasD Posts: 260
    @Toolfan66
    Your tentative cost of $100 is more than fair and not a concern to me. If a pair of qualifying SDA's present themselves, the positioning of the 'Dreadnought' in my system would be in a visually dominating location and basically 'on display'. I'd probably be looking at having the case engraved and some custom grey anodizing to more closely match my 'Carver' gear. Is just the natural, un-textured aluminum finish an option? Thanks
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, 4070, 1030, APPJ 2013, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Monitor 7cTL's, SDA CRS's, 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • Gerres26
    Gerres26 Posts: 859
    Larry, do you have any pics of the last run you did? Anodized does sound nice but not if it runs the cost up too high.
  • RobbyKY
    RobbyKY Posts: 117
    adca6u2cf6pn.jpg

    The black anodizing on the end panels from the last run is a beautiful contrast to the powder coat on the body. Hard to capture black on black with a simple iPhone. And yes, I've not gotten around to sourcing out some decent knobs for the spikes yet...

    I would consider a grey version if you could match the old Carver gear like ThomasD suggested as this next unit will operate with a set of Carver M-4.0t amps but I'm perfectly happy with whatever the group direction is. Of course, Bob couldn't match colors himself between production runs so picking which version of "Carver Grey" would be a monumental task without a specific sample I would think?? My current dreadnought operates with a set of TFM-55's that are black and I bought a new black faceplate for the C-1 preamp off the 'bay to be all matchy/matchy.

    Put me down for one (1) case this go-round please!!

    Robby
    Media Room: Parasound JC-5, Cambridge 851N, Schiit Freya, SDA SRS 1.2tl
    Game Room: Carver M4.0t, Carver C-4000, Oppo BDP-105, SDA SRS 1.2tl
    Bar/Card Room: Carver TFM-55, Carver C-1(BillD), Oppo BDP-93, SDA SRS 3.1
    Son's Room: Carver TFM-55, Carver C-1(BillD), Laptop/AQ Dragonfly, SDA SRS 3.1
    Bedroom: McIntosh MC150, Cambridge CXN, SDA 2Btl
    Outdoor Pool Area: Yamaha R-N803 with four Polk Atrium 6
    HT: Polk RTi A9s, CSi-A6, RT-65, RTi-A3's, Marantz SR5012, XPA3, UDP-203, Epson 5040UB


  • lightman1
    lightman1 Posts: 10,776
    In for one case. Thanks Larry!
  • audioluvr
    audioluvr Posts: 5,420
    I'm in for a plain one.
    Gustard X26 Pro DAC
    Belles 21A Pre modded with Mundorf Supreme caps
    B&K M200 Sonata monoblocks refreshed and upgraded
    Polk SDA 1C's modded / 1000Va Dreadnaught
    Wireworld Silver Eclipse IC's and speaker cables
    Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)


    There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus
  • As long as I got in on the transformer buy, I'm in for one of these.
    Speakers
    Energy RC-70 Mains, Energy RC-LRC Center, Energy RC-R (x4) Rear Channels, Energy RC-R (x2) Front Effects
    Polk 5jr+
    Polk SDA 2B
    Polk SDS 3.1TL

    Equipment
    Panamax 5510 Re-generator Power Conditioner
    Yamaha RX-V3800 Receiver
    Digital Sources: Sony CDP-X339ES CD Player, HHB CDR830 BurnIt Professional CD Recorder, Sony PS3, Oppo DV-983H DVD Player
    Analog Sources: Sony TC-K890ES Cassette, Nakamichi DR-1 Cassette, Technics SL-7 Turntable
  • daddyjt
    daddyjt Posts: 2,305
    In for one (1) please. I have one of your other (silver sides) cases, and it is top notch. I am not concerned about finish/color on this one.
    "Conservative Libertarians love the country, progressive leftists love the government." - Andrew Wilkow


    “Human beings are born with different capacities. If they are free, they are not equal. And if they are equal, they are not free.”
    ― Aleksandr Solzhenitsyn

  • pitdogg2
    pitdogg2 Posts: 24,471
    RobbyKY wrote: »
    adca6u2cf6pn.jpg

    The black anodizing on the end panels from the last run is a beautiful contrast to the powder coat on the body. Hard to capture black on black with a simple iPhone. And yes, I've not gotten around to sourcing out some decent knobs for the spikes yet...

    I would consider a grey version if you could match the old Carver gear like ThomasD suggested as this next unit will operate with a set of Carver M-4.0t amps but I'm perfectly happy with whatever the group direction is. Of course, Bob couldn't match colors himself between production runs so picking which version of "Carver Grey" would be a monumental task without a specific sample I would think?? My current dreadnought operates with a set of TFM-55's that are black and I bought a new black faceplate for the C-1 preamp off the 'bay to be all matchy/matchy.

    Put me down for one (1) case this go-round please!!

    Robby

    Let it be known that the outrigger feet are NOT included

    Thanks
  • ThomasD
    ThomasD Posts: 260
    Let it be known that the outrigger feet are NOT included

    What?! That may be a deal breaker!! ;);)
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, 4070, 1030, APPJ 2013, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Monitor 7cTL's, SDA CRS's, 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • RobbyKY
    RobbyKY Posts: 117
    Let it be known that the outrigger feet are NOT included

    Nope, those are 80/20 "10 Series" 4199 pivot arm parts. I use a lot of their stuff and had these laying around. The small ones are about $5 each but they show out of stock on Amazon lately. Just bought some direct so still in production.

    You can find them here:

    https://8020.net/shop/4199.html[/url]

    They also come in black but I liked the contrast:

    https://8020.net/shop/4199-black.html

    Robby

    Media Room: Parasound JC-5, Cambridge 851N, Schiit Freya, SDA SRS 1.2tl
    Game Room: Carver M4.0t, Carver C-4000, Oppo BDP-105, SDA SRS 1.2tl
    Bar/Card Room: Carver TFM-55, Carver C-1(BillD), Oppo BDP-93, SDA SRS 3.1
    Son's Room: Carver TFM-55, Carver C-1(BillD), Laptop/AQ Dragonfly, SDA SRS 3.1
    Bedroom: McIntosh MC150, Cambridge CXN, SDA 2Btl
    Outdoor Pool Area: Yamaha R-N803 with four Polk Atrium 6
    HT: Polk RTi A9s, CSi-A6, RT-65, RTi-A3's, Marantz SR5012, XPA3, UDP-203, Epson 5040UB


  • gudnoyez
    gudnoyez Posts: 8,056
    I made the cut so yes Larry put me down for one, I'm pretty sure the one on my800va is one of yours fine workmanship indeed. I'm down for one of these from the new run . Thanks
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
  • verb
    verb Posts: 10,176
    I’m in! Thanks Larry for doing this!
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • Gerres26
    Gerres26 Posts: 859
    Much nicer than my Hammond version...I'm in for one please!
  • Hey what happened to the last thread from this morning?
    Anyway I’m in for one
  • indyhawg
    indyhawg Posts: 1,633
    Larry--Count me in.
  • ThomasD
    ThomasD Posts: 260
    Am I correct in assuming that these 1 KVA torrids don’t generate any appreciable heat when used in this SDA IC configuration? I see no venting on the cabinets so no ventilation issues?
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, 4070, 1030, APPJ 2013, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Monitor 7cTL's, SDA CRS's, 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • pitdogg2
    pitdogg2 Posts: 24,471
    Never any heat
  • gmcman
    gmcman Posts: 1,739
    I'm in for one case.

    Thank you again Larry.
  • erniejade
    erniejade Posts: 6,288
    I'm in please
    Musical Fidelity Tri-Vista 300, Audioquest Thunderbird Zero Speaker Cable, Tyler Highland H2, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
  • Put me down for a case please.

    I plan to terminate my cable directly inside the box without fancy terminals. Already have an updated heavy gauge cable with speakon terminals.
    One less link in the chain.
    Any downside I’m missing besides the bling factor?
  • verb
    verb Posts: 10,176
    So Larry @Toolfan66 getting my read on about the whole dreadnaught thing, and found this:

    https://forum.polkaudio.com/discussion/166261/finally-neutrik-dreadnought-etc

    Gotta admit, those red panels look great, not to mention the other bling mods you made! Wow! :smiley:

    Is this group buy only black panels this time? :blush:
    ld2816k8scqh.png
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • monepolk
    monepolk Posts: 1,140
    Put me down for 1!
  • ThomasD
    ThomasD Posts: 260
    verb wrote: »
    So Larry @Toolfan66 getting my read on about the whole dreadnaught thing, and found this:

    https://forum.polkaudio.com/discussion/166261/finally-neutrik-dreadnought-etc

    Gotta admit, those red panels look great, not to mention the other bling mods you made! Wow! :smiley:

    Is this group buy only black panels this time? :blush:
    ld2816k8scqh.png
    verb wrote: »
    So Larry @Toolfan66 getting my read on about the whole dreadnaught thing, and found this:

    https://forum.polkaudio.com/discussion/166261/finally-neutrik-dreadnought-etc

    Gotta admit, those red panels look great, not to mention the other bling mods you made! Wow! :smiley:

    Is this group buy only black panels this time? :blush:
    ld2816k8scqh.png

    @Toolfan66 I for one would sure consider paying an up charge for a different anodizing option. B)
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, 4070, 1030, APPJ 2013, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Monitor 7cTL's, SDA CRS's, 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • B-Man
    B-Man Posts: 13
    Larry - thanks for your generosity. Please put me down for 2.
  • audioluvr
    audioluvr Posts: 5,420
    edited January 2019
    Put me down for a case please.

    I plan to terminate my cable directly inside the box without fancy terminals. Already have an updated heavy gauge cable with speakon terminals.
    One less link in the chain.
    Any downside I’m missing besides the bling factor?

    The box is essentially an RF shield (with bling). How you terminate is your choice but think of a boat with holes in it during a storm... Essentially you could install it in one of your speakers for that invisible effect but where is the "cool" in that?
    Post edited by audioluvr on
    Gustard X26 Pro DAC
    Belles 21A Pre modded with Mundorf Supreme caps
    B&K M200 Sonata monoblocks refreshed and upgraded
    Polk SDA 1C's modded / 1000Va Dreadnaught
    Wireworld Silver Eclipse IC's and speaker cables
    Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)


    There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus
  • nooshinjohn
    nooshinjohn Posts: 25,033
    edited January 2019
    audioluvr wrote: »
    Essentially you could install it in one of your speakers for that invisible effect

    This is a bad idea.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson