Finally!!!!! Neutrik, Dreadnought, etc..

Well it's been awhile since I have modded anything, and I have had all of this stuff for a year or better just sitting around..

I pulled my 1.2tl's out, and replaced my binding post plates, my Dreadnought, and finally made some MIT cables, I did this as I have wanted to use the Neutrik's that Jesse recommended when he did his. I of course built a case for myself when some of you had the group buy going on..

The Neutrik's are so much better then the binding posts, I love it...

Pics..
6ety0yp99q5f.jpg
89ap5x9xwd7i.jpg
y9z61oxwp6ej.jpg

Comments

  • Toolfan66
    Toolfan66 Posts: 16,834
    I almost forgot what fun it is to solder, while listening to some tunes, and sipping on a drink...
  • EndersShadow
    EndersShadow Posts: 17,517
    I'd expect nothing less than stellar build quality and execution from you Larry.

    Looking very nice!
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • westmassguy
    westmassguy Posts: 6,850
    Very nice Larry, as usual.
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer

    dhsspeakerservice.com/
  • F1nut
    F1nut Posts: 49,708
    Oh yeah, real nice!

    Now, I see why you did the red faceplates on the Dreadnought B)
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • Mystery
    Mystery Posts: 2,546
    Looks like upgrade never ends. ;)

    Klipsch RB81, KG3.5, B&W DM602.5, Polk.
    Subwoofers: Klipsch RW10, Triad ProSub Bronze.
  • ZLTFUL
    ZLTFUL Posts: 5,640
    Love the beautiful work Larry.
    "Some people find it easier to be conceited rather than correct."

    "Unwad those panties and have a good time man. We're all here to help each other, no matter how it might appear." DSkip
  • Jhayman
    Jhayman Posts: 1,548
    Excellent work Larry...
    Great Pics
    ATC SCM40's,VTL TL 2.5 Preamp,PSB Stratus Goldi's,McCormack DNA 500,McCormack MAP-1 Preamp,Pro-Ject Xtension 10 TT,Ortofon Cadenza Red/Nordost RedDawn LS Speaker cables, Bryston BDP-2, Bryston BDA-2,PS Audio AC-3 power cables
  • Outstanding job Larry!! Such wonderful attention to detail!
    Sunfire Theater Grand IV
    Sunfire Cinema Grand Signature
    SRS 2.1TL
    SDA 2BTL's
    CSiA6
    FXiA4
    FXiA6
    SDA 2A's
    Monitor 10A's

    http://www.douglasconnection.com
  • GlennDog
    GlennDog Posts: 3,084
    SAAAAAWWEEEEEEEEEET
    AC Regenerator PS Audio PerfectWave Power Plant 10
    Source Lumin U1 Mini into Lampi Baltic 4
    Pre Cary SLP-05
    Power Rogue M180 Dark monos
    Mains Salk HT2-TL
    Rythmik F12
  • mantis
    mantis Posts: 17,032
    Looks fun , great job
    Dan
    My personal quest is to save to world of bad audio, one thread at a time.
  • MrBuhl
    MrBuhl Posts: 2,419
    love the red anodizing - that is really sharp!
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • Toolfan66
    Toolfan66 Posts: 16,834
    Thanks guys, speakers are back up and running....
  • voltz
    voltz Posts: 5,384
    Awesome work as always! WTG Larry!
    2 ch- Polk CRS+ * Vincent SA-31MK Preamp * Vincent Sp-331 Amp * Marantz SA8005 SACD * Project Xperience Classic TT * Sumiko Blue Point #2 MC cartridge

    HT - Polk 703's * NAD T-758 * Adcom 5503 * Oppo 103 * Samsung 60" series 8 LCD
  • Thorton
    Thorton Posts: 1,324
    Wow, those look amazing. Nice work.
    _____________________________________________________________________________________________
    Ethernet Filter: GigaFOILv4 with Keces P3 LPS
    Source: Roon via ethernet to DAC interface
    DAC: Bricasti M1SE
    Pre/Pro: Marantz AV8805
    Tube Preamp Buffer: Tortuga TPB.V1
    Amp1: Nord One NC1200DM Signature, Amp2: W4S MC-5, AMP3: W4S MMC-7
    Front: Salk SoundScape 8's, Center: Salk SoundScape C7
    Surround: Polk FXIA6, Surround Back: Polk RTIA9, Atmos: Polk 70-RT
    Subs: 2 - Rythmik F25's
    IC & Speaker Cables: Acoustic Zen, Wireworld, Signal Cable
    Power Cables: Acoustic Zen, Wireworld, PS Audio
    Room Treatments: GIK Acoustics
  • headrott
    headrott Posts: 5,484
    Just saw this thread. Looks great Larry!

    So what did the crossovers cost you? $3.00 to $4.00? $3.59 as a guess? Somewhere in that price range? :p
    Relayer-Big-O-Poster.jpg
    Taken from a recent Audioholics reply regarding "Club Polk" and Polk speakers:
    "I'm yet to hear a Polk speaker that merits more than a sentence and 60 seconds discussion." :\
    My response is: If you need 60 seconds to respond in one sentence, you probably should't be evaluating Polk speakers.....


    "Green leaves reveal the heart spoken Khatru"- Jon Anderson

    "Have A Little Faith! And Everything You'll Face, Will Jump From Out Right On Into Place! Yeah! Take A Little Time! And Everything You'll Find, Will Move From Gloom Right On Into Shine!"- Arthur Lee
  • schwarcw
    schwarcw Posts: 7,328
    Very Nice Larry!

    I did a similar mod. Scompracer mounted by Neutrik connectors similar to your on my SRS 2.3s with great results!

    Here is a pick:

    carl_2.3_plate.jpg

    Carl

  • schwarcw
    schwarcw Posts: 7,328
    The Neutriks are a great addition! Nice solid connection. I am using Monster Reference "Z" wire for the interconnect cable
    Carl

  • Moose68Bash
    Moose68Bash Posts: 3,842
    Fantastic project, Larry!

    Beautifully done!
    Family Room, Innuos Statement streamer (Roon Core) with Morrow Audio USB cable to McIntosh MC 2700 pre with DC2 Digital Audio Module; AQ Sky XLRs to CAT 600.2 dualmono amp, Morrow Elite Speaker Cables to NOLA Baby Grand Reference Gold 3 speakers. Power source for all components: Silver Circle Audio Pure Power One with dedicated 20 amp circuit to main panel.

    Exercise Room, Innuos Streamer via Cat 6 cable connection to PS Audio PerfectWave MkII DAC w/Bridge II, AQ King Cobra RCAs to Perreaux PMF3150 amp (fully restored and upgraded by Jeffrey Jackson, Precision Audio Labs), Supra Rondo 4x2.5 Speaker Cables to SDA 1Cs (Vr3 Mods Xovers and other mods.), Dreadnaught with Supra Rondo 4x2.5 interconnect cables by Vr3 Mods. Power for each component from dedicated 20 amp circuit to main panel, except Innuos Statement powered from Silver Circle Audio Pure Power One.

  • oldmodman
    oldmodman Posts: 740
    I will NEVER get tired of seeing the craftsmanship that is going into these speakers.

    I hope to be able to install some of these works of art in my set(s) someday too.