New Polk SDA-2Bs: looking for Polk expert in Seattle area

Options
1235»

Comments

  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
    This is a bad photo, but it shows one my MWs. I wanted to point out the red spot of point that identifies the positive connection. The black/blue wires connect to the red dot connector, and the white where there is no red dot. Your speakers may differ.

    IMG_0088.jpg
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
    Poor photo, but you get the idea

    IMG_0090.jpg
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
    As you can see, the Hurricane nuts protrude slightly, but they are not in the way at all.

    IMG_0098.jpg
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
    Again: don't overtighten.

    IMG_0099.jpg
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
    I tried **** these into the MDF with no adhesive with limited success. On the second go around, I used a drop of Gorilla Glue on each. They've been drying for about 90 minutes. I'll give it another half an hour.

    IMG_0100.jpg
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
    I purchased a couple of 13"x13" ceramic tiles to place the spiked speakers on. I can't wait to hear the difference in the sound.

    IMG_0101.jpg
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
    Here is the completed project - speakers on spikes on ceramic tile. If anyone has questions about this mod, please feel free to ask. People here were so willing to help me, I want to pay it forward.

    BTW, I have a spare original Polk SDA cable (blade-to-blade) that I purchased from Helen at Polk before the mod. First $35 + shipping takes it. (It's brand new; original cost with tax and shipping is about $50).

    photo.jpg
  • agfrost
    agfrost Posts: 2,497
    edited January 2013
    Options
    Moofy, I'll take the B/B cable. I plan to make one eventually, but most of my plans are slow in developing. :redface: I'll send you a PM.

    What's under the carpet? Unless it's hardwood, you may want to try simply piercing through the carpet--You'll likely get more out of your spikes that way. Being up on that tile will be helpful in fine-tuning where you want them to be, though.

    Nice project and good documentation. Cool that Jake was able to help you out. I just completed my 2B crossover upgrading and am in the early hours of burn-in. Happy listening!

    Jay
    Jay
    SDA 2BTL * McCormack DNA 0.5 amp * Oppo BDP-93 * Modded Adcom GDA-600 DAC * Rythmik F8 (x2)
    Micro Seiki DQ-50 * Mitsubishi LT-30 * Hagerman Cornet 2 Phono
    Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
  • Moofy
    Moofy Posts: 102
    edited January 2013
    Options
    It's wood of some sort, but probably not hardwood. Contractor special flooring, no doubt. I just did a little listening and they sound sublime...and still hours to go to get them burned in. Very exciting.
  • PolkieMan
    PolkieMan Posts: 2,446
    edited January 2013
    Options
    Nice job good pictures.
    POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
    POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
    PIONEER PL-510A SONY BDP S5100
    POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
    ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1