Looking for SDA's? Updated info here!
Options
Comments
-
Well...I left out at 5:30am and just got back 30 min ago....long day:eek:
The tweeters are in fact SL 3000's....now does this mean they are 1.2TL's or has someone replaced the tweeters?? Someone said to pull a driver...what do I look for??
I think I have 2 dead tweeters, but I bought them anyway and they are in pretty good condition. They will make a great set once gone over and hooked up...Can you still get the SL3000 tweeters, or will I have to go with something else??
I am very tired and am going to bed....I will post more tomorrow.
Thanks everyone for your help and advise:DPio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
This content has been removed.
-
nooshinjohn wrote: »what did you end up getting them for? They are indeed the TL's if they are the 3000's and the tweets have been replaced with the rdo 198's CONGRATS and welcome to the Big Dog club!
I don't think the tweets have been replaced. I pulled a couple and they say SL 3000. I paid the $1,100.00. They are really in pretty good shape. The guy selling them was super nice and his business suffering a bit due to the economy..
He called me on my cell about 20 minutes before I arrived and told they were going to go eat.....and he would leave the back door open....:eek:I can't believe he was that trusting having never met me. Oh well, I don't feel bad about the purchase even having to replace a couple of the tweeters... Can you still get them??
Thanks for the welcome!! I can't wait to get them going!! They sounded great at his place with a lot less power than they will have here:DPio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
This content has been removed.
-
Are the tweets actually dead or are they just playing at a lower volume than the rest. Is it the same tweeter on each channel or is it two "dead" on the same speaker?
The reason I ask is because each of the four tweeters in the array play at different volumes. -
Oddly enough, it is the third tweet down on each side...I pulled all 4 on one speaker and get exactly 5.9 ohms resistance on all except the dead one, no response at all on it...
It looks "cooked" around the edges....maybe driven too high with low power???Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
Are the RDO 198's better, or should I look for used SL3000's??Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
Oddly enough, it is the third tweet down on each side...I pulled all 4 on one speaker and get exactly 5.9 ohms resistance on all except the dead one, no response at all on it...
It looks "cooked" around the edges....maybe driven too high with low power???
The third tweeter down is the one most of the music comes from. Each of the others are rolled off. It definitly sounds like they are fried. You should call Polk Customer Service (if you have the funds) and ask for 8 RD0198s. Make sure you tell them you are a Club Polk member. You will get a discount and free shipping. -
VMAXER
You should start a new thread to get help with your situation. This is a " Looking for SDA" thread. -
VMAXER
You should start a new thread to get help with your situation. This is a " Looking for SDA" thread.
Sorry about that...got carried away. I will start a new one a little later.:)
Thanks!Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
I started a new thread here:
http://www.polkaudio.com/forums/showthread.php?p=1100426#post1100426
Please look at it as I am discovering a few issues......Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
SRS on the bay for some of you west coast polkies:
http://cgi.ebay.com/Polk-Audio-SRS-Signature-Reference-Speakers-SDA-II_W0QQcmdZViewItemQQ_trkparmsZ65Q3a10Q7c66Q3a2Q7c39Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem4a98cc533fQQitemZ320391107391QQptZVintageQ5fElectronicsQ5fR2QQsalenotsupported -
SDA-1C Black Studio Version pair...1 owner with original boxes...
http://cgi.ebay.com/POLK-SDA-1C-speakers-Incredible-sound-No-reserve_W0QQcmdZViewItemQQ_trkparmsZ65Q3a10Q7c66Q3a1Q7c39Q3a1Q7c293Q3a1Q7c294Q3a25QQ_trksidZp3286Q2ec0Q2em14QQhashZitem27a9e2512eQQitemZ170353905966QQptZSpeakersQ5fSubwoofersQQsalenotsupported -
Damn you people in MA!!!SDA 1C, SDA 2A, SDA SRS 2, CMT-340SE, Swan M200MKII, Swan D1080MKII, Behringer MS40
Outlaw Audio M2200 x2, GFA 555 II, BGW 750C
GDA 700, Outlaw Audio Model 990, Sansa Fuze, X-Fi Platinum Fatality -
Damn you people in MA!!!
He will ship them.....free!! I would buy them if I hadn't just bought a set of 1.2tl's.Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
Damn you people in MA!!!
What are you talking about Ender...these things hardly ever show up in New England. I had to get my 2Bs from N.C.? Now these appear. LOL! Who else is UP here with 'me'!
cnhCurrently orbiting Bowie's Blackstar.!
Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
[sig. changed on a monthly basis as I rotate in and out of my stash] -
Yeah, but I prefer pickup for huge old speakers. Then I can see what condition they are in face-to-face. Also, $150 discount if picked up. That's sick. Then I don't think I would have been able to hold back from picking up.SDA 1C, SDA 2A, SDA SRS 2, CMT-340SE, Swan M200MKII, Swan D1080MKII, Behringer MS40
Outlaw Audio M2200 x2, GFA 555 II, BGW 750C
GDA 700, Outlaw Audio Model 990, Sansa Fuze, X-Fi Platinum Fatality -
Dirt Cheap SDA CRS+ in the Atlanta area...I think George D. contacted the seller but I heard nothing else about them...
http://atlanta.craigslist.org/ele/1240693109.html -
http://washingtondc.craigslist.org/mld/ele/1254152109.html
just picked this off Craigslist washington or baltimore md -
SDA II's on A-gon up for auction in VA...
http://cgi.audiogon.com/cgi-bin/auc.pl?spkrfull&1247447259
Nik -
-
Newark? Bring backup."He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
-
I just saw those also. I was to dumb to link.
To big for me.I like speakers that are bigger than a small refrigerator but smaller than a big refrigerator:D -
Conradicles wrote: »
I wonder if that is Newark NJ or Newark DE. -
This content has been removed.
-
nooshinjohn wrote: »they look like TL's...
They are:rolleyes: -
Someone already dropped a bid on these. Rofl.SDA 1C, SDA 2A, SDA SRS 2, CMT-340SE, Swan M200MKII, Swan D1080MKII, Behringer MS40
Outlaw Audio M2200 x2, GFA 555 II, BGW 750C
GDA 700, Outlaw Audio Model 990, Sansa Fuze, X-Fi Platinum Fatality -
hearingimpared wrote: »I wonder if that is Newark NJ or Newark DE.
I asked. Newark OHIO!!! -
1C's on Long Island: http://newyork.craigslist.org/lgi/ele/1259127073.html"He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
-
appear to have been well taken care of.JC approves....he told me so. (F-1 nut)








