Head unit so many choices

123468

Comments

  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    does anyone know where i caN BUY the optional led light bar/fankit for the polk Pa 1200.1 power amp i know they make one but cant find it anywhere?
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • MacLeod
    MacLeod Posts: 14,358
    edited May 2008
    Id run down to your local audio or tuner shop and see what theyve got.

    I dont know if the 701 controller will mount in a double din cause Ive never tried it. As a guess Id say it should.
    polkaudio sound quality competitor since 2005
    MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
    08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st

    polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D
    · Share on FacebookShare on Twitter
  • 300m
    300m Posts: 28
    edited May 2008
    The 701 controller will mount in a double din location along with a din sized head unit. It should come with the hardware to mount it.
    Team Schil Acoustics


    ’05 MECA world champion
    ’06 MECA world champion
    ’06 MECA Culbertson cup (best of show)
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    ah i love you meca boys yall are so damned helpful. Got a question for you though, mac and 300 my friend says that polk doesnt make good amps or cubs and there speakers are only decent, is he full of it, he said for the price her can get much better, with alot more wattage, ive always known polk to be like the elite in audio matters, is he full of it.
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • eloplayspolo
    eloplayspolo Posts: 1,117
    edited May 2008
    mac has come in 2nd at world finals 2 years in a row with polk.....
    that makes him one of the best right?


    Kobe Bryant - the best basketball player in the nba... his shoe is a nike... if the shoe is good enough for him to play in... wouldnt u trust yourself to wear it when u played basketball?
    2013 Toyota Prius
    Audible Physics 3 Way: H6MB, AR3-A, AR2.0
    Image Dynamics iDMax 12" D2v4
    (2) Alpine PDX-V9 Bridged, Alpine PDX-M12 (500w Mid-Bass, 200w Mid, 200w Tweet, 1200w Sub)
    Mosconi 6to8 v8
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    thats is a good point if its good enough for mac to take to the world finals, than its good enough for me.
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    my friend was talking bout soundstream and ma audio, and matts i never heard of them
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    i guess now that i have made my mind up its torture time till i can buy it. and what exactly do you do with the modeling clay on the doors do you smear it on the trim or what.
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    and i was wanting to save a little bit of money since im going with the h701 processor would a cheaper alpine hu work just fine, i was just wondering because the 9887 has imprint built in to it but why pay for the imprint if im not going to use it. so what would be a good alternative to the 9887
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    ok the polk sr 124 dvc come wired at 2 ohm, correct? If i install two of them in the same box and wire them together i either get 4 ohm or 1 ohm , correct? Now the pa 1200.1 puts out 1200w rms @ 1 ohm, the two subs wired together would be rated for 1400wrms @ 1 ohm. I was planning in running one pa 1200.1 to each sub indepently, which would give me a total of 1600wrms, 800 per sub. if was was two wire the subs together should i bridge the two pa 1200.1 together, which would give me 2400wrms @ the ohm im not sure of. how should i wire these bad boys up, run them indepenently, or two 1200.1 bridged and just turn the gains down alot?
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • MacLeod
    MacLeod Posts: 14,358
    edited May 2008
    thumpin07 wrote: »
    ah i love you meca boys yall are so damned helpful. Got a question for you though, mac and 300 my friend says that polk doesnt make good amps or cubs and there speakers are only decent, is he full of it, he said for the price her can get much better, with alot more wattage, ive always known polk to be like the elite in audio matters, is he full of it.

    Ill put them up against anything out there. I dont think Polk speakers are the best in the world, but dollar for dollar they are and regardless of cost, the SR's will hold theyre own against the best in the world.

    You have to remember tho that no speaker will sound good if you install and/or tune them poorly but a mid level speaker will never sound great no matter how well you install them or tune them but a great quality speaker, like the SR's, can sound awesome if done right.....and sound pretty damn solid out of the box too.
    polkaudio sound quality competitor since 2005
    MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
    08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st

    polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    MacLeod wrote: »
    Ill put them up against anything out there. I dont think Polk speakers are the best in the world, but dollar for dollar they are and regardless of cost, the SR's will hold theyre own against the best in the world.

    You have to remember tho that no speaker will sound good if you install and/or tune them poorly but a mid level speaker will never sound great no matter how well you install them or tune them but a great quality speaker, like the SR's, can sound awesome if done right.....and sound pretty damn solid out of the box too.

    true how bout the wireing deal
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    thumpin07 wrote: »
    ok the polk sr 124 dvc come wired at 2 ohm, correct? If i install two of them in the same box and wire them together i either get 4 ohm or 1 ohm , correct? Now the pa 1200.1 puts out 1200w rms @ 1 ohm, the two subs wired together would be rated for 1400wrms @ 1 ohm. I was planning in running one pa 1200.1 to each sub indepently, which would give me a total of 1600wrms, 800 per sub. if was was two wire the subs together should i bridge the two pa 1200.1 together, which would give me 2400wrms @ the ohm im not sure of. how should i wire these bad boys up, run them indepenently, or two 1200.1 bridged and just turn the gains down alot?

    any ideas on the baest way to wire these up
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • MacLeod
    MacLeod Posts: 14,358
    edited May 2008
    If youre going to use 2 1200.1's then get 2 SR124DVC's and wire each one per amp. That would be 2 ohms per amp and 800 RMS per sub.
    polkaudio sound quality competitor since 2005
    MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
    08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st

    polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    ok thats the way i was thinking about doing it, now do i slave one amp off the other and daisy chain them together so they work in sync. or how does that work i know the power and grounds are run seperateim talking about the rca cords and stuff
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • MacLeod
    MacLeod Posts: 14,358
    edited May 2008
    Just run them independantly of each other.
    polkaudio sound quality competitor since 2005
    MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
    08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st

    polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    ok so dont worry about using the master/slave function
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    but coming out of the hu i only have one subwoofer preout or does the h701 have multiple sub outputs how are two differnt sub amps connected to the processor
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • killerb
    killerb Posts: 390
    edited May 2008
    the amp has preamp outputs, just run an rca from one amp to the other.
    kenwood excelon kdc-x991 h.u.
    Rockford Fosgate 360.3 DSP
    Rockford Fosgate POWER1000 running entire system
    Image Dynamics IDQ12 Sub
    Morel Elate 6 front stage
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    thumpin07 wrote: »
    and i was wanting to save a little bit of money since im going with the h701 processor would a cheaper alpine hu work just fine, i was just wondering because the 9887 has imprint built in to it but why pay for the imprint if im not going to use it. so what would be a good alternative to the 9887

    any ideas or should i go with the 9887
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    killerb wrote: »
    the amp has preamp outputs, just run an rca from one amp to the other.

    ok but mac said to run the indepently of each other how is this possible
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • eloplayspolo
    eloplayspolo Posts: 1,117
    edited May 2008
    most of the units now have imprint. i have the 9885 and it works well.... if u have the processor... i dont think there is much of a diffrence. the 9886 is the same price and a little better..... 100 bucks diff. up to u
    2013 Toyota Prius
    Audible Physics 3 Way: H6MB, AR3-A, AR2.0
    Image Dynamics iDMax 12" D2v4
    (2) Alpine PDX-V9 Bridged, Alpine PDX-M12 (500w Mid-Bass, 200w Mid, 200w Tweet, 1200w Sub)
    Mosconi 6to8 v8
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    i've decided to go with the 9886 its a hundred bucks cheaper, and with the 9887 i was paying for eq bands that i will just be bypassing with the processor.
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    i went to my local shop the other day stereo joes in kingsport. they have trophies all over the wALLS and in the shop. meca and others. any way he told me to check with him as far as price goes cause he may be cheaper then crutchfield. He also said they can help me out as far as how to do stuff, and he said when i get everything put in bring it back and he would help me tune it for sq. and he said he can tune for sq and spl
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    i just heard a full sr setup today similiar to what im getting and it is the only system where u can actually hear the music and the bass at the same time the sr components have enough ummph behind them to be heard over the bass i hate when the bass drowns out all the music
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • MacLeod
    MacLeod Posts: 14,358
    edited May 2008
    thumpin07 wrote: »
    i went to my local shop the other day stereo joes in kingsport. they have trophies all over the wALLS and in the shop. meca and others. any way he told me to check with him as far as price goes cause he may be cheaper then crutchfield. He also said they can help me out as far as how to do stuff, and he said when i get everything put in bring it back and he would help me tune it for sq. and he said he can tune for sq and spl

    Sounds like a good shop. Any shop that supports and participates in competition is one I support and is usually a better shop because theyre out there putting their stuff to the test.
    polkaudio sound quality competitor since 2005
    MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
    08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st

    polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    are shops usually cheaper the crutchfield
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    well the shop i went too had probebly a hundred or so trophies from comeptitions so they are more into competing and customization work. it just want to spend less than what cfield wants is all.
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter
  • MacLeod
    MacLeod Posts: 14,358
    edited May 2008
    Your local shop can usually give you better deals if you talk with them. Tell them what youre looking for and what youre willing to spend and you may be surprised. Plus, if theyre going to do the install for you they may give you a discount on the gear.
    polkaudio sound quality competitor since 2005
    MECA SQ Rookie of the Year 06 ~ MECA State Champ 06,07,08,11 ~ MECA World Finals 2nd place 06,07,08,09
    08 Car Audio Nationals 1st ~ 07 N Georgia Nationals 1st ~ 06 Carl Casper Nationals 1st ~ USACi 05 Southeast AutumnFest 1st

    polkaudio SR6500 --- polkaudio MM1040 x2 -- Pioneer P99 -- Rockford Fosgate P1000X5D
    · Share on FacebookShare on Twitter
  • thumpin07
    thumpin07 Posts: 217
    edited May 2008
    well why is cfield so dang high then, i mean mac tell me what you think bout the price heres the break down anyone else feel free to chime in too:

    98thumpin's Cart
    Quantity Description In Stock? Reg Price Your Price

    Remove

    Save to Wishlist


    Polk SR5250 5-1/4" Component System

    Vehicle: 1998 Ford Crown Victoria Sedan without Premium sound (change)

    Speaker Location: Front Door
    Yes $749.99


    » Add ServiceNet Service Plan

    » Add Accessories

    1

    Speaker Bracket 142SA68
    Yes $14.99

    FREE
    1

    Speaker Harness 12071058
    Yes $12.99

    FREE

    Remove

    Save to Wishlist


    Polk Audio PA1200.1 800W x 1 Car Amplifier

    This item is temporarily out of stock
    No $1,199.98


    » Add ServiceNet Service Plan

    » Add Accessories


    Remove

    Save to Wishlist


    Alpine PXA-H701 Multi-Channel Audio Processor
    Yes $499.99


    » Add Accessories


    Remove

    Save to Wishlist


    Polk Audio PA500.4 85W x 4 Car Amplifier
    Yes $399.99


    » Add ServiceNet Replacement Plan

    » Add Accessories


    Remove

    Save to Wishlist


    Polk Audio SR 124 DVC 12" DVC 4-ohm Component Subwoofer

    This item is temporarily out of stock
    ETA: 6/13/2008 $699.98


    » Add ServiceNet Replacement Plan

    » Add Accessories


    Remove

    Save to Wishlist


    Alpine CDA-9886 CD Receiver

    Vehicle: 1998 Ford Crown Victoria Sedan without Premium sound (change)
    Yes $299.99


    » Add ServiceNet Replacement Plan

    » Add Accessories

    1

    Receiver Kit 120995600
    Yes $12.99

    FREE
    1

    Receiver Harness 120701771
    Yes $12.99

    FREE
    1

    Receiver Add-on 120865618
    Yes $4.99

    FREE

    Remove

    Save to Wishlist


    Alpine RUX-C701 Controller for PXA-H701 Audio Processor
    Yes $249.99

    Remove

    Save to Wishlist


    Alpine KCA-100BT Bluetooth Interface Module
    Yes $199.99


    » Add Accessories


    Remove

    Save to Wishlist


    Autosound 2000 CD Set 5 Test CDs
    Yes $69.95

    Remove

    Save to Wishlist


    Dynamat 19100 License Frame Kit
    Yes $12.99

    Remove

    Save to Wishlist


    S&G Tool Aid 87650 Door Trim and Panel Removal Tool
    Yes $9.99
    1

    Crutchfield MasterSheet Instructions

    Vehicle: 1998 Ford Crown Victoria Sedan without Premium sound
    Yes $4.99

    FREE
    1

    FREE Crutchfield Guide: Amplifier Installation
    Yes

    FREE
    1

    FREE Crutchfield Guide: Vibration Damping Installation
    Yes

    FREE
    1

    FREE Crutchfield Guide: Component Speakers Installation
    Yes

    FREE
    1

    FREE Crutchfield Guide: Subwoofer Installation
    Yes

    FREE


    Merchandise Subtotal:


    $4,392.83
    tyler birch

    ht system
    denon avr-1907
    monitor 70 towers-polkaudio
    nakamichi bx -100 tape deck
    sony 5 disc cd/dvd player hdmi ready
    velodyne dps-12 subwoofer

    Car audio

    AMP: FUSION EN-AM8001 800 watts max 368 watts rms x 1 channel @ 2 ohms stable
    SUB: 12 INCH 1000W DVC VOLFENHAG 2 Ohm stable useable ohms 2-8ohms
    · Share on FacebookShare on Twitter