Group-buy-2019-dreadnought-avel-lindberg-1000va-isolation-transformers

1…457910…17

Comments

  • vcwatkins
    vcwatkins Posts: 1,993
    Wow, thanks to @pitdogg2 for putting this together! Pretty amazing.

    The 2016 total was 43 units (we had one member increase his purchase at the last moment). And considering that total, I expected it to take longer before reaching critical mass on another buy.

    I'll be sending out PM's to confirm numbers and request shipping data today.

    Cheers!
    Craig
    b]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,572
    vcwatkins wrote: »
    Wow, thanks to @pitdogg2 for putting this together! Pretty amazing.

    The 2016 total was 43 units (we had one member increase his purchase at the last moment). And considering that total, I expected it to take longer before reaching critical mass on another buy.

    I'll be sending out PM's to confirm numbers and request shipping data today.

    Cheers!
    Craig

    WOW 43 incredible I didn't think it was that high. I knew we had many that had multiples looks like Carton was correct.

    You da MAN Craig.
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,572
    edited January 2019
    OK here we go updated list as of 1/4/2019

    1. Erniejade

    2. pitdogg2

    3. La2vegas

    4. Gerres26

    5. Indyhawg

    6. StainOsteel2

    7. audioluvr

    8. Verb

    9. vcwatkins

    10. BC6

    11. Lightman1

    12. BlueBirdMusic

    13. ThomasD

    14. honestaquarian

    15. Eric Landman

    16. monepolk

    17. Manticore

    18. RobbyKY

    19. DNSPY007 in for 2

    20. daddyjt in for 2

    21. B-Man in for 2

    As it stands we are at 24 units



    POSSIBLY IN One more to 25 the best deal we can get.

    22. GlennDog

    23. gudnoyez

    24. Headrott come on Greg you know you want one :D

    25. FestYboy
    · Share on FacebookShare on Twitter
  • erniejade
    erniejade Posts: 6,321
    :):D
    Klipsch The Nines, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
    · Share on FacebookShare on Twitter
  • vcwatkins
    vcwatkins Posts: 1,993
    Clickable list to make admin easier.
    1. @erniejade
    2. @pitdogg2
    3. @la2vegas
    4. @Gerres26
    5. @indyhawg
    6. @stainless0steel2
    7. @audioluvr
    8. @verb
    9. @vcwatkins
    10. @BC6
    11. @lightman1
    12. @BlueBirdMusic
    13. @ThomasD
    14. @honestaquarian
    15. @Eric Landman
    16. @monepolk
    17. @Manticore
    18. @RobbyKY
    19. @DNSPY007 in for 2
    20. @daddyjt in for 2
    21. @B-Man in for 2
    b]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
    · Share on FacebookShare on Twitter
  • Gerres26
    Gerres26 Posts: 864
    I know it's a little early but does anyone have the dimensions of 1000va unit...trying to figure out if it'll fit in my 800va case or not
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,572
    edited January 2019
    Gerres26 wrote: »
    I know it's a little early but does anyone have the dimensions of 1000va unit...trying to figure out if it'll fit in my 800va case or not

    I guess one should ask what case you have?
    Pictures of yours may help.

    My 800va is in an aluminum case and has about an 1/2" of room around it. When I put the lid on it, it holds the transformer in place. There is no bolt to hold the torrid in mine.
    Where did your case come from?

    The 1000va is a bit bigger all around and it is possible if yours has excess room like inches all around.
    · Share on FacebookShare on Twitter
  • gudnoyez
    gudnoyez Posts: 8,124
    f3iojojfcpn1.jpg
    Will the new transformer fit in this case the dimensions are 11X11X4 if not where do you all plan on sourcing the cases for these?
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
    · Share on FacebookShare on Twitter
  • vcwatkins
    vcwatkins Posts: 1,993
    I believe those are the same dimensions as my first 1000VA case. I'll check.

    Dunno if Larry has planned another run; but we have plenty of time to figure things out, in any case ;)
    b]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,305
    edited January 2019
    I plan on helping out on this run, I will just need a total of how many cases, I have been keeping an eye out on this thread...

    My cases have no issues using the 800 or the 1000 so if you have one of my cases using the 800 and are upgrading, you will not have a problem using the 1000..

    My cases are made to use speakon’s..

    Please don’t muck up this thread for cases, let this stay on track for the transformers, maybe we start a new thread for the cases...

    Cheers...

    I think these were from the last run..

    3wm74fjllgdp.jpeg
    nccarn7d2rid.jpeg
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
    · Share on FacebookShare on Twitter
  • Gerres26
    Gerres26 Posts: 864
    pitdogg2 wrote: »
    Gerres26 wrote: »
    I know it's a little early but does anyone have the dimensions of 1000va unit...trying to figure out if it'll fit in my 800va case or not

    I guess one should ask what case you have?
    Pictures of yours may help.

    My 800va is in an aluminum case and has about an 1/2" of room around it. When I put the lid on it, it holds the transformer in place. There is no bolt to hold the torrid in mine.
    Where did your case come from?

    The 1000va is a bit bigger all around and it is possible if yours has excess room like inches all around.

    I'll measure it up tomorrow, i can't remember where I purchased online. It is a black cast aluminum enclosure...maybe Hammond brand...maybe :*
    · Share on FacebookShare on Twitter
  • lightman1
    lightman1 Posts: 10,792
    I'm good for one case if you make another run, Larry.
    · Share on FacebookShare on Twitter
  • lightman1
    lightman1 Posts: 10,792
    Boogers! I started mucking up the thread... :'(
    · Share on FacebookShare on Twitter
  • indyhawg
    indyhawg Posts: 1,645
    You probably have not even started drinking yet.
    · Share on FacebookShare on Twitter
  • txcoastal1
    txcoastal1 Posts: 13,306
    indyhawg wrote: »
    You probably have not even started drinking yet.

    It's Friday, and I'm sure he started ehhhh say 3:17pm eastern
    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC

    erat interfectorem cesar et **** dictatorem dicere a
    · Share on FacebookShare on Twitter
  • B-Man
    B-Man Posts: 13
    I tried to send my shipping info via reply to the email I received from Craig and it was bounced back as undeliverable ?

    Is there an email address we can send our shipping info to, as opposed to putting it here in an open forum ?
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,572
    lightman1 wrote: »
    Boogers! I started mucking up the thread... :'(

    YEA like that was a first....

    Larry your a champ man ;);)
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,572
    edited January 2019
    .
    Post edited by pitdogg2 on
    · Share on FacebookShare on Twitter
  • daddyjt
    daddyjt Posts: 2,553
    B-Man wrote: »
    I tried to send my shipping info via reply to the email I received from Craig and it was bounced back as undeliverable ?

    Is there an email address we can send our shipping info to, as opposed to putting it here in an open forum ?

    @B-Man I can send Craig your shipping info if you’d like. I think PMs are disabled for new members...?

    Shoot me an email...
    "Conservative Libertarians love the country, progressive leftists love the government." - Andrew Wilkow


    “Human beings are born with different capacities. If they are free, they are not equal. And if they are equal, they are not free.”
    ― Aleksandr Solzhenitsyn

    · Share on FacebookShare on Twitter
  • txcoastal1
    txcoastal1 Posts: 13,306
    pitdogg2 wrote: »
    B-Man wrote: »
    I tried to send my shipping info via reply to the email I received from Craig and it was bounced back as undeliverable ?

    Is there an email address we can send our shipping info to, as opposed to putting it here in an open forum ?

    PM me B-Run I'll get it to Craig @vcwatkins

    B-Man...hello...B-run lives in Austin
    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC

    erat interfectorem cesar et **** dictatorem dicere a
    · Share on FacebookShare on Twitter
  • B-Man
    B-Man Posts: 13
    daddyjt wrote: »
    B-Man wrote: »
    I tried to send my shipping info via reply to the email I received from Craig and it was bounced back as undeliverable ?

    Is there an email address we can send our shipping info to, as opposed to putting it here in an open forum ?

    @B-Man I can send Craig your shipping info if you’d like. I think PMs are disabled for new members...?

    Shoot me an email...

    That's funny - new member... Thanks Mark !!
    · Share on FacebookShare on Twitter
  • vcwatkins
    vcwatkins Posts: 1,993
    B-Man wrote: »
    I tried to send my shipping info via reply to the email I received from Craig and it was bounced back as undeliverable ?

    Is there an email address we can send our shipping info to, as opposed to putting it here in an open forum ?

    Sorry about that B-Man. I'll PM my email.
    b]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,572
    edited January 2019
    .
    Post edited by pitdogg2 on
    · Share on FacebookShare on Twitter
  • lightman1
    lightman1 Posts: 10,792
    edited January 2019
    :o Bad edit!
    Post edited by lightman1 on
    · Share on FacebookShare on Twitter
  • txcoastal1
    txcoastal1 Posts: 13,306
    edited January 2019
    .
    Post edited by txcoastal1 on
    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC

    erat interfectorem cesar et **** dictatorem dicere a
    · Share on FacebookShare on Twitter
  • GospelTruth
    GospelTruth Posts: 403
    Ok, if this is still open and Larry is going to be making a run of the cases, I'll be in for one. Hopefully this is not yet closed. If you all think this will work wonders for a common ground amp with 3.1TL SDAs, I'll go with it.
    Speakers
    Energy RC-70 Mains, Energy RC-LRC Center, Energy RC-R (x4) Rear Channels, Energy RC-R (x2) Front Effects
    Polk 5jr+
    Polk SDA 2B
    Polk SDS 3.1TL
    Equipment
    Panamax 5510 Re-generator Power Conditioner
    Yamaha RX-V3800 Receiver
    Digital Sources: Sony CDP-X339ES CD Player, HHB CDR830 BurnIt Professional CD Recorder, Sony PS3, Oppo DV-983H DVD Player
    Analog Sources: Sony TC-K890ES Cassette, Nakamichi DR-1 Cassette, Technics SL-7 Turntable
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,572
    GospelTruth wrote: »
    Ok, if this is still open and Larry is going to be making a run of the cases, I'll be in for one. Hopefully this is not yet closed. If you all think this will work wonders for a common ground amp with 3.1TL SDAs, I'll go with it.

    PM @vcwatkins it is not too late.
    · Share on FacebookShare on Twitter
  • FestYboy
    FestYboy Posts: 3,861
    When is the cutoff?
    · Share on FacebookShare on Twitter
  • westmassguy
    westmassguy Posts: 6,850
    This is the case I use for the 800VA, as have others:
    http://www.hammondmfg.com/pdf/1550N.pdf
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer

    dhsspeakerservice.com/
    · Share on FacebookShare on Twitter
  • honestaquarian
    honestaquarian Posts: 3,196
    GospelTruth wrote: »
    Ok, if this is still open and Larry is going to be making a run of the cases, I'll be in for one. Hopefully this is not yet closed. If you all think this will work wonders for a common ground amp with 3.1TL SDAs, I'll go with it.

    @GospelTruth I too have a pair of 3.1TL’s (and I’m using some Monitor 5jr’s for surround duty) and YES this sucker works wonders for them!!
    · Share on FacebookShare on Twitter