Driver/Speaker rings for your vintage Polk SDA's Monitors..

1246789

Comments

  • dkfreebird
    dkfreebird Posts: 1,186
    One question,on the 1.2tls what is the best way to get the original inserts out to install the rings.
    2 Channel
    Polk 1.2tl's Modded with dreadnought
    Musical Fidelity M6Si
    North Star Intenso Dac
    Auralic Aries Mini Streamer
    Oppo 103
    Pangea PC
    Wireworld Equinox 7 interconnects
    Wireworld Equinox 7 Speaker Cables and Jumpers

    Backups 2.3tl, Crs+ pin/blade with stands.Monitor 5 peerless,Monitor 4 peerless,Polk R200,McCormack Dna 0.5 Deluxe McCormack Dna 1,Dared Sl 2000A,Dayens Ampino Rogue Magnum 66 pre
  • aprazer402
    aprazer402 Posts: 3,147
    Received my box of rings tonight. Cool! Now I just need to tear into my "stock" speakers: 1. Glue the magnets on the MW's, 2. Dynamat Extreme the MW's and SW's, 3. Install replacement RD0-194's & RD0-198's (in proper models) and install rings at that time, 5. Spike them, 6. Send cross-overs to Dave to be rebuilt with Gimpod boards etc. Should have it all done by 2018. Thanks again Larry! A great product.
  • Toolfan66
    Toolfan66 Posts: 17,240
    dkfreebird wrote: »
    One question,on the 1.2tls what is the best way to get the original inserts out to install the rings.

    they screw out with an Allen Wrench, if you look at the hole you will notice it..

  • dkfreebird
    dkfreebird Posts: 1,186
    Thanks Larry I will go check that out.One less thing to do when they get here. :)
    2 Channel
    Polk 1.2tl's Modded with dreadnought
    Musical Fidelity M6Si
    North Star Intenso Dac
    Auralic Aries Mini Streamer
    Oppo 103
    Pangea PC
    Wireworld Equinox 7 interconnects
    Wireworld Equinox 7 Speaker Cables and Jumpers

    Backups 2.3tl, Crs+ pin/blade with stands.Monitor 5 peerless,Monitor 4 peerless,Polk R200,McCormack Dna 0.5 Deluxe McCormack Dna 1,Dared Sl 2000A,Dayens Ampino Rogue Magnum 66 pre
  • I received mine yesterday. I appreciate the quick service.

    Jim
    5.1 System:
    TCL R613 55" 4K
    Front: SRS-3.1TL
    Center: CS400i
    Surround: Monitor 10B
    PSW10 subwoofer
    Onkyo PR-SC886P Pre/Pro
    NAD T955 5 channel power amplifier
    Technics SL-1710 MK2 turntable
    Audio-Technica AT14Sa cartridge
    Parasound P3 pre-amp
    Oppo BDP-103 Blu-Ray
    2014 MacBook Pro 2.8 GHz

    2.0 Office System:
    Monitor 10A (Peerless)
    Outlaw 1050 receiver
    Parasound HCA-1000A power amp
    MacPro
  • Toolfan66
    Toolfan66 Posts: 17,240
    Looks like a lot of you guys received them yesterday, considering they left Monday UPS ship these pretty fast..
  • DollarDave
    DollarDave Posts: 2,575
    I got mine, too. Will commence to cutting and grinding to fit these idiotic 3.1 cabinets... I might end up cutting them like the tweeter brackets.
  • Polkie2009
    Polkie2009 Posts: 3,834
    Got mine too, thanks a lot Larry!
  • dagame27
    dagame27 Posts: 574
    Mine arrived today. Thank you!
    ChrisPreamp: Anthem Pre 2L (Jan-Phillips Green) Processor: Marantz SR7012 Amp: B&K 200.5Streaming: Bluesound Node 2IDAC: Eastern Electric Minimax Plus4K Bluray: Panasonic UB820Mains: Von Schweikert VR2Center: Von Schweikert LCR15 Subs: 2 SVS Sb13 Ultra (HT Only) Analysis Plus Cables
  • Toolfan66
    Toolfan66 Posts: 17,240
    nbrowser wrote: »
    Now I can officially say, payment sent. Thank you Larry!

    Ha, no worries, I knew you would that's why I just shipped it. I will let you know when the payment gets here...

  • dkfreebird
    dkfreebird Posts: 1,186
    Got mine today along with my sheet of blackhole 5.Time to get the cabinets ready for the new crossovers.Thanks again Larry!
    2 Channel
    Polk 1.2tl's Modded with dreadnought
    Musical Fidelity M6Si
    North Star Intenso Dac
    Auralic Aries Mini Streamer
    Oppo 103
    Pangea PC
    Wireworld Equinox 7 interconnects
    Wireworld Equinox 7 Speaker Cables and Jumpers

    Backups 2.3tl, Crs+ pin/blade with stands.Monitor 5 peerless,Monitor 4 peerless,Polk R200,McCormack Dna 0.5 Deluxe McCormack Dna 1,Dared Sl 2000A,Dayens Ampino Rogue Magnum 66 pre
  • waxman
    waxman Posts: 124
    Hi Larry- received mine too! Thanks again!
  • vmaxer
    vmaxer Posts: 5,117
    I received mine as well, thanks a lot!!
    Pio Elete Pro 520
    Panamax 5400-EX
    Sunfire TGP 5
    Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
    PS Audio GCPH phono pre
    Sunfire CG 200 X 5
    Sunfire CG Sig 405 X 5
    OPPO BDP-83 SE
    SDA SRS 1.2TL Sonicaps and Mills
    Ctr CS1000p
    Sur - FX1000 x 4
    SUB - SVS PB2-Plus

    Workkout room:
    Sony Bravia XBR- 32-Inch 1080p
    Onkyo TX-DS898
    GFA 555
    Yamaha DVD-S1800BL/SACD
    Ft - SDA 1C

    Not being used:
    RTi 38's -4
    RT55i's - 2
    RT25i's -2, using other 2 in shop
    LSI 15's
    CSi40
    PSW 404
  • tonyp063
    tonyp063 Posts: 1,083
    Got mine yesterday.
    Thank you very much Larry!
  • Is it too late to get in on the rings Larry? If not, I need a set for my SDA 1C's please. Thanks Larry.
  • MrBuhl
    MrBuhl Posts: 2,419
    Got mine! Thanks Larry!
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • stogie
    stogie Posts: 230
    Rings came in today. Thank you Larry for putting this together.
    Speakers: Polk SDA-SRS xovers rebuilt by David, RDO194's, Dynamat, BH5, glued magnets, new cloth, custom aluminum terminal plates with Cardas posts and Speakon interconnect
    Speaker Cables, Jumpers & Interconnect: DIY Douglas Connection
    Power Amp: Sunfire Architect's Choice Series II
    Preamp: Adcom GFP-750
    SACD/CD: Oppo BDP-95
    Tuner: Sansui TU-717
    TT: Technics SL-MA1
    Phono Pre: Emotiva XPS-1
    Music Server: Mac Mini w/JRiver - iPad w/JRemote
    DAC: Eastern Electric MiniMax Plus
    Other Polks: SDA: 1A, 1C, 2B, CRS+ / Monitor: 10A, 5jr, 4 / RT5
  • aprazer402
    aprazer402 Posts: 3,147
    I may have missed it, were there any discussions if Larry was going to make any tweeter brackets? Thanks.
  • boston1450
    boston1450 Posts: 7,639
    Thanks Larry. Got home to a package on doorstep. Merry Chrismas
    ..
  • Toolfan66
    Toolfan66 Posts: 17,240
    aprazer402 wrote: »
    I may have missed it, were there any discussions if Larry was going to make any tweeter brackets? Thanks.

    I still have a few from the last time I ran tweeter brackets, how many do you need?

    I did take care of the guys that specifically asked for them..

    I also have about 5 sets of crossover rings for the BIG BOYS SRS/1.2/1.2TL..

    I also have about 6-8 sets of Binding Post rings..

    If any of you want to clear any of these out for me just let me know..

  • Malbec
    Malbec Posts: 553
    Larry,
    Add two sets of binding post rings to my crossover ring order.

    Thanks
    Robert
  • DollarDave
    DollarDave Posts: 2,575
    Larry, how much do the binding post rings run? I may need two to three sets.
  • gudnoyez
    gudnoyez Posts: 8,124
    Do you have 4 Tweeter brackets left over along with the hardware and template if so I could use them. Do I need binding post rings not sure.
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
  • PM sent requesting tweeter brackets for a set of Monitor 7s with Peerless if you have any extras. Thanks!
  • Larry,

    I would like a pair of the tweeter brackets for my pair of 3.1 TLs. Is this still possible. Please PM the price.

    Jim

    5.1 System:
    TCL R613 55" 4K
    Front: SRS-3.1TL
    Center: CS400i
    Surround: Monitor 10B
    PSW10 subwoofer
    Onkyo PR-SC886P Pre/Pro
    NAD T955 5 channel power amplifier
    Technics SL-1710 MK2 turntable
    Audio-Technica AT14Sa cartridge
    Parasound P3 pre-amp
    Oppo BDP-103 Blu-Ray
    2014 MacBook Pro 2.8 GHz

    2.0 Office System:
    Monitor 10A (Peerless)
    Outlaw 1050 receiver
    Parasound HCA-1000A power amp
    MacPro
  • aprazer402
    aprazer402 Posts: 3,147
    edited December 2015
    18 tweeter brackets sets, (8 for 1.2TL) (6 for 2.3) (4 for 1C). Thanks, Larry, PM me cost.
  • hytekrednek
    hytekrednek Posts: 127
    edited December 2015
    I am interested in buying a ring set and tweeter brackets for my 2.3TLs please. Please pm me total cost and availability. Thanks.

    also want a ring set for my SDA CRS and tweeter brackets.
  • stogie
    stogie Posts: 230
    Larry, I'll take a pair crossover rings for the BIG BOYS (SRS). PM sent.
    Speakers: Polk SDA-SRS xovers rebuilt by David, RDO194's, Dynamat, BH5, glued magnets, new cloth, custom aluminum terminal plates with Cardas posts and Speakon interconnect
    Speaker Cables, Jumpers & Interconnect: DIY Douglas Connection
    Power Amp: Sunfire Architect's Choice Series II
    Preamp: Adcom GFP-750
    SACD/CD: Oppo BDP-95
    Tuner: Sansui TU-717
    TT: Technics SL-MA1
    Phono Pre: Emotiva XPS-1
    Music Server: Mac Mini w/JRiver - iPad w/JRemote
    DAC: Eastern Electric MiniMax Plus
    Other Polks: SDA: 1A, 1C, 2B, CRS+ / Monitor: 10A, 5jr, 4 / RT5
  • Toolfan66
    Toolfan66 Posts: 17,240
    Ah the snow has kept me busy here, I will update you guys tomorrow what I can and or can't do...

    Thanks!!
  • madmax
    madmax Posts: 12,434
    I would like a set of the crossover rings for the 1.2s please. Received the previous order, Thanks!
    Vinyl, the final frontier...

    Avantgarde horns, 300b tubes, thats the kinda crap I want... :D