Vintage Monitor and SDA Speaker Deals
Comments
-
Pretty good sounding speakers. Had two sets. A good deal for someone for a Benjamin!
Do you guys update the xovers to 2Bs?Don't take experimental gene therapies from known eugenicists. -
I listened to mine as is. Sold both sets.
-
I think the 2A's had a 2 board xover.
I was given a set that I assumed were 2A's (looked just the ones linked above). I figured since they had the 2 board xover I couldn't upgrade to 2B and do the TL mod. Funny thing is when I opened them up they WERE actually 2B studios with wood grain vinyl. I thought the studio versions only came in black vinyl.Post edited by joebass3 on -
Far as I know the A's were two board blade blade. In between from what I have heard they used up parts from newer to older vice versa in old new cabinets so yes there were 2b's that look like 2a's. As far as conversion all it takes is 2b networks and two 6511 mid drivers in the SDA position. I am not 100% certain on some of this but I am sure someone will slip in and correct me if I am wrong.
-
Far as I know the A's were two board blade blade. In between from what I have heard they used up parts from newer to older vice versa in old new cabinets so yes there were 2b's that look like 2a's. As far as conversion all it takes is 2b networks and two 6511 mid drivers in the SDA position. I am not 100% certain on some of this but I am sure someone will slip in and correct me if I am wrong.
I'll chime in. I did a quick check of SDA Handbook and it says the 2B had (1) MW6503 (instead of MW6510) for stereo driver and (1) MW6511 (instead of MW6510) for SDA driver. Passive was the same SW121.George / NJ
Polk 7B main speakers, std. mods+ (1979, orig owner)
Martin Logan Dynamo sub w/6ft 14awg Power Cord
Onkyo A-8017 integrated
Logitech Squeezebox Touch Streamer w/EDO applet
iFi nano iDSD DAC
iPurifier3
iDefender w/ iPower PS
Custom Steve Wilson 1m UPOCC Interconnect
iFi Mercury 0.5m OFHC continuous cast copper USB cable
Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14awg, ultra low inductance
Custom Vibration Isolation Speaker Stands and Sub Platform -
-
Internal cabinet volume could be different as well as the piece of MDF inside that went between the mid woofers but that I am not certain on either. May have been, may not have been
As far as x overs there is not a problem with building them on a board if one has or can source the components. -
2b and 2a studio cabinet should be the same.
That mw6511is going to be a hard find. -
No doubt Pitt.
-
I've substituted a 6502 in place of the 6511 in CRS+ cabinets and SDA-10Bs. I'm not sure what the substitution would sound like in the larger 2B cabinets. Maybe someone has tried here before?Don't take experimental gene therapies from known eugenicists.
-
Did you build the networks with all new parts ? Black Dragons maybe ?
-
Thankswispolkboy wrote: »wispolkboy wrote: »Monitor 7's
these look to be in great condition. I think that they are the silver basket ones.
I would love to get them, but the wife would kill me.
https://milwaukee.craigslist.org/ele/d/walworth-vintage-polk-audio-monitors/7442273127.html
Thanks @wispolkboy for this find. I followed up on these and picked them up!
Welcome to the club...are you going to update the crosseovers?
I’m going to listen to them unmodified initially but yes, based on everything I’ve read and all the recommendations on this site, I will definitely get the crossovers updated. -
I did the TL upgrade on my 2A's. You still have to use a common ground amp and you can't use the isolation transformer, but you can use the RD0198 tweeters with an additional 5.8ufcapacitor if my memory is correct.
-
Polk Monitor 10's in decent shape for 25 bucks. No affiliation.
https://losangeles.craigslist.org/sfv/ele/d/north-hollywood-polk-audio-speakers/7463832326.htmPost edited by la2vegas on -
THERE YOU GO!
-
No affiliation and no link. Another meaningful post.
-
Shouldn't be foruming while driving!
-
Oh crap now you tell me! In all fairness, in my hour and a half drive each way through the middle of nowhere every day, if it wasn't for foruming and driving I may have dozed off and drove off a cliff. Now I know some of you are saying... And your point is???
No point. Thank you for keeping me alive one more day.Gustard X26 Pro DAC
Belles 21A Pre modded with Mundorf Supreme caps
B&K M200 Sonata monoblocks refreshed and upgraded
Polk SDA 1C's modded / 1000Va Dreadnaught
Wireworld Silver Eclipse IC's and speaker cables
Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)
There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus -
Well after giving it some thought, I decided to purchase the 25 dollar Monitor 10's...
-
Well after giving it some thought, I decided to purchase the 25 dollar Monitor 10's...
Nice, not a lot of thought needed for that decision! -
Well after giving it some thought, I decided to purchase the 25 dollar Monitor 10's...
What are your plans? I'm listening to the radio on my set right now. I bought them new in the late 80's.HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
I really don't have anything special planned for them. They will simply enter the rotation of a somewhat vintage setup that I've been tinkering with.
Currently it consists of a Yamaha CR1020, a Pioneer PL10, and some Boston Acoustics A150's. Other components come in and out of rotation as the need for tinkering develops. -
That will be a nice set up. Glad someone got them that is one of us.
-
The Thrifty Setups in Mah House Big thrifty stereo in the basement w/ my custom SDA-1C (built with help from kind forum members) * Beautiful 1966 MCM GE console upgraded w/ Bluetooth, Dual turntable, and Paradigm speakers in family room * Swanky 1980 Realistic system and great TEAC eq with dancing colored lights in the living room * custom 5B on a system for my Dad * Ye Olde college stereo in the garage
-
Those are nice however I prefer the 2B's with the wood tops...
-
Polk CRS early edition, not my cup of tea but for a hundred bucks you can't go wrong. No affiliation.
-
I'd snatch them up and mod away.Don't take experimental gene therapies from known eugenicists.
-
Monitor 5's with peerless tweets in the Great Northwest for 50 clams, no affiliation. https://seattle.craigslist.org/see/ele/d/seattle-polk-monitor-speakers/7462971001.html
-
Nice. Crazy low price. I would pounce on that. One driver isn't silver basket, so probably not the original driver. I did not know that they were countersinking the passives back then.George / NJ
Polk 7B main speakers, std. mods+ (1979, orig owner)
Martin Logan Dynamo sub w/6ft 14awg Power Cord
Onkyo A-8017 integrated
Logitech Squeezebox Touch Streamer w/EDO applet
iFi nano iDSD DAC
iPurifier3
iDefender w/ iPower PS
Custom Steve Wilson 1m UPOCC Interconnect
iFi Mercury 0.5m OFHC continuous cast copper USB cable
Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14awg, ultra low inductance
Custom Vibration Isolation Speaker Stands and Sub Platform -
Ones I have seen like that best I recall were not countersunk and as you said have the silver metal baskets. Probably shifted a magnet. Who cares for 50 bones that's a deal.