Ben62670 lied to me a took my $
Comments
-
That just sucks!!!!! I have three sets of empty boards as well if that helps at all.. I doubt it as Trey jumped in but they are here!!
Way to go guys!!! -
Vr3MxStyler2k3 wrote: »I have to ask what in the heck was done to that board for it to do that to an inductor? I did not even know you could fry an inductor... lol
Anything becomes a fuse if you put too much current through it. However, it looks like there was hot glue or some other crap on the inductor. That is what might be the burnt black gunk. -
maximillian wrote: »Anything becomes a fuse if you put too much current through it. However, it looks like there was hot glue or some other crap on the inductor. That is what might be the burnt black gunk.
Even worse, if you put in a polarized electrolytic cap backwards...
Ka-BOOM!polkaudio RT35 Bookshelves
polkaudio 255c-RT Inwalls
polkaudio DSWPro550WI
polkaudio XRT12 XM Tuner
polkaudio RM6750 5.1
Front projection, 2 channel, car audio... life is good! -
Those little inductors are wrapped in black tape, they come that way. I am not sure how ben could or would do that by just upgrading them with caps and resistors.. he would have had to try and use them would he have not??
-
Thanks again to everyone's kind outpouring to help.I hope i don't have to lean on any of you but it's nice to know you guys are there if i do.Unbelievable Kindness!!
And my apologies to the OP.I crapped all over your thread and i am sorry.
If you need a pin/pin let me know and i may have something for you.Main Rig-Realistic AM/FM Record player 8 track boasting 4 WPC
Backup Rig-2 CH-Rogue Audio Zeus w/Factory Special Dark Mods,Joule-Electra 300ME Platinum Preamp,OPPO-105 w/Modwright Tube Mod, Auralic Aries G2.1,Polk 2.3TL,3.1TL's,Dreadnought,RTA-15TL's,1C's All Fully Modded,2xRTA-12c's ,Benchmark DAC3 HGC,Synology NAS,VPI Scout w/Dynavector DV-20XH and Rogue Audio Ares Phono Preamp,Sony PCM-R500 DAT,HHB-850 Pro CDR,Tascam CC-222SLMKII Cassette/CDR,MIT S3.3 Shotgun Cables,Shunyata Hyra-8,Shunyata and Triode Labs Power Cords
I’M OFFENDED!!!! -
I solder all the time and have access to some nice equipment.Where’s the KABOOM?!?! There’s supposed to be an Earth shattering KABOOM!!!
-
Thanks again to everyone's kind outpouring to help.I hope i don't have to lean on any of you but it's nice to know you guys are there if i do.Unbelievable Kindness!!
And my apologies to the OP.I crapped all over your thread and i am sorry.
If you need a pin/pin let me know and i may have something for you.
No worries. Thanks for the pin/pin offer but it sounds like George is going to hook me up. Good guy!
Best of luck with your crossover. -
oops......_________________________________________________
***\\\\\........................... My Audio Journey ............................./////***
2008 & 2010 Football Pool WINNER
SOPAThank God for different opinions. Imagine the world if we all wanted the same woman -
I gues we can now say the "benefit of the doubt" on this is pretty much dead. Shame really....HT SYSTEM-
Sony 850c 4k
Pioneer elite vhx 21
Sony 4k BRP
SVS SB-2000
Polk Sig. 20's
Polk FX500 surrounds
Cables-
Acoustic zen Satori speaker cables
Acoustic zen Matrix 2 IC's
Wireworld eclipse 7 ic's
Audio metallurgy ga-o digital cable
Kitchen
Sonos zp90
Grant Fidelity tube dac
B&k 1420
lsi 9's -
TOOLFORLIFEFAN wrote: »Those little inductors are wrapped in black tape, they come that way. I am not sure how ben could or would do that by just upgrading them with caps and resistors.. he would have had to try and use them would he have not??
I know he moved mine (inductors) on my 2B's back in 2008 to make room for the larger Sonicaps. Luckily they were still properly in-circuit and not over-glued. I did have to solder in a jumper on the right channel board that he forgot when he removed the polyswitch.VTL ST50 w/mods / RCA6L6GC / TlfnknECC801S
Conrad Johnson PV-5 w/mods
TT Conrad Johnson Sonographe SG3 Oak / Sumiko LMT / Grado Woodbody Platinum / Sumiko PIB2 / The Clamp
Musical Fidelity A1 CDPro/ Bada DD-22 Tube CDP / Conrad Johnson SD-22 CDP
Tuners w/mods Kenwood KT5020 / Fisher KM60
MF x-DAC V8, HAInfo NG27
Herbies Ti-9 / Vibrapods / MIT Shotgun AC1 IEC's / MIT Shotgun 2 IC's / MIT Shotgun 2 Speaker Cables
PS Audio Cryo / PowerPort Premium Outlets / Exact Power EP15A Conditioner
Walnut SDA 2B TL /Oak SDA SRS II TL (Sonicaps/Mills/Cardas/Custom SDA ICs / Dynamat Extreme / Larry's Rings/ FSB-2 Spikes
NAD SS rigs w/mods
GIK panels -
That really sucks. Shame to see a member take advantage of trusting people.
At the same time it's great to see members step up to make things right at any cost. Love CP!!!Living Room Rig:D
Rotel RSP-1069/Rotel RMB-1095/Rotel-1072/Polk lsI15's W/modded xoverW/DBsubs/Polk LsiC/lsI7's/Klipsch sub-12"the weak link"/DLP Mitsubishi 65"
Xbox360/PS3/WII
M.Br. setup:)
Emotiva MMC-1/Rotel RMB-1075/Polk BlackStone TL350's/Velodyne SPL1000/Samsung 51" Plasma
Computer Rig:
Rotel RB1050/Tannoy DC4's/Klipsch RW-10d/ImodIpod/HK AVR230 for now....
Headphones-Ultrasone-HFI780's w/LittleDot MK Vamp Portables Panasonic HJE-900's -
Awesome to see you guys help the new guys with issues.Shoot the jumper.....................BALLIN.............!!!!!
Home Theater Pics in the Showcase :cool:
http://www.polkaudio.com/forums/showcase/view.php?userid=73580 -
Those inductors come from the factory covered in glue, so that's not the problem. I could see the use of non-common ground amps without the AI-1 causing that issue tho.
Regardless, there's no excuse for the multitude of issues folks here have had dealing with Ben. Some of us "old timers" tried to warn folks about him, but many wouldn't listen. Hopefully, the next time you will.
Personally, I think enough is enough. It's time to show him the door.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Personally, I think enough is enough. It's time to show him the door.
x2. This has gotten ridiculous.
And if anyone in/around Texas wants some help modding or with soldering in general, give me a shout.- Computer Rig -
YAΘIN MS-20L, polkaudio RT5
- Main Rig -
Pioneer SC-37, Overnight Sensations, Samsung 52" LCD
- Currently In Progress -
Curt Campbell's Uluwatu LCR, LMS Ultra Gjallarhorn, JBL W15GTi stereo subs, 2.1 entertainment system for the gf -
There's no excuse for the multitude of issues folks here have had dealing with Ben. Some of us "old timers" tried to warn folks about him, but many wouldn't listen. Hopefully, the next time you will.
Personally, I think enough is enough. It's time to show him the door.
If he has the door shut in his face then that means he can keep everyones money and items ? -
polkfarmboy wrote: »If he has the door shut in his face then that means he can keep everyones money and items ?
He's already keeping their money and items. You don't reward someone like that by allowing them to stick around and screw over someone else. The reality is that he should have been booted long ago. We wouldn't have half the issues we do now.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
It's a damn shame. Never wanted to believe Ben would've dropped so low. :frown:
I thought the same thing about the Dallas Cowboys, and we've all seen how that's turned out :sad:- Computer Rig -
YAΘIN MS-20L, polkaudio RT5
- Main Rig -
Pioneer SC-37, Overnight Sensations, Samsung 52" LCD
- Currently In Progress -
Curt Campbell's Uluwatu LCR, LMS Ultra Gjallarhorn, JBL W15GTi stereo subs, 2.1 entertainment system for the gf -
I thought the same thing about the Dallas Cowboys, and we've all seen how that's turned out :sad:
NOOOOO!!!! Jim, I've lost all respect for you after that comment, my dear Cowboys. Maybe they need to go back to the cocain infested days of the mid-ninties to bring a few titles home, seemed to work then... :razz: -
NOOOOO!!!! Jim, I've lost all respect for you after that comment, my dear Cowboys. Maybe they need to go back to the cocaine infested days of the mid-ninties to bring a few titles home, seemed to work then... :razz:
fixed "cocaine" :biggrin:JC approves....he told me so. (F-1 nut) -
Those inductors come from the factory covered in glue, so that's not the problem. I could see the use of non-common ground amps without the AI-1 causing that issue tho.
Regardless, there's no excuse for the multitude of issues folks here have had dealing with Ben. Some of us "old timers" tried to warn folks about him, but many wouldn't listen. Hopefully, the next time you will.
Personally, I think enough is enough. It's time to show him the door.
Joe just PM'ed me last week and I see they finally put the banned tag under his name.. -
Those inductors come from the factory covered in glue, so that's not the problem. I could see the use of non-common ground amps without the AI-1 causing that issue tho.
Regardless, there's no excuse for the multitude of issues folks here have had dealing with Ben. Some of us "old timers" tried to warn folks about him, but many wouldn't listen. Hopefully, the next time you will.
Personally, I think enough is enough. It's time to show him the door.
These fried with a Sunfire 400x5.When they started going south i switched to a M1.0t Russ Kall modded amp.
So both are common ground.Sounds like multiple soldering/placement issues from what the doroman tells me.Main Rig-Realistic AM/FM Record player 8 track boasting 4 WPC
Backup Rig-2 CH-Rogue Audio Zeus w/Factory Special Dark Mods,Joule-Electra 300ME Platinum Preamp,OPPO-105 w/Modwright Tube Mod, Auralic Aries G2.1,Polk 2.3TL,3.1TL's,Dreadnought,RTA-15TL's,1C's All Fully Modded,2xRTA-12c's ,Benchmark DAC3 HGC,Synology NAS,VPI Scout w/Dynavector DV-20XH and Rogue Audio Ares Phono Preamp,Sony PCM-R500 DAT,HHB-850 Pro CDR,Tascam CC-222SLMKII Cassette/CDR,MIT S3.3 Shotgun Cables,Shunyata Hyra-8,Shunyata and Triode Labs Power Cords
I’M OFFENDED!!!! -
Maybe you could go knock on Ben's door and maybe knock on his head a littleMain Family Room: Sony 46 LCD, Sony Blue Ray, Sony DVD/VCR combo,Onkyo TXNR 708, Parasound 5250,
Polk SDS-SRS with mods, CSI 5 center + Klipsch SC2, Polk RT2000P rears, Klipsch KG 1.5's sides, Polk Micro Pro 1000, Polk Micro Pro 2000, Polk SW505, Belkin PF60, Signal Cable Classics,Monster IC's, 2 15 amp circuits & 1 20 amp circuit.
Living Room: Belkin PF60, Parasound HCA2200, MIT ProlineEXP balanced IC's,Emotiva XDA-1 DAC/Pre,Emotiva ERC2 transport,MIT AVT2, Polk LSI 9's. -
I thought the same thing about the Dallas Cowboys, and we've all seen how that's turned out :sad:
Theres a guy by the name of Ben Leber playing for the Vikings... one and the same maybe? there is no team lower than the Vikes this season.The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson -
nooshinjohn wrote: »Theres a guy by the name of Ben Leber playing for the Vikings... one and the same maybe? there is no team lower than the Vikes this season.
yup just like last year, and the year before that, and the one.................................. -
yup just like last year, and the year before that, and the one..................................
-
You let me down Ben.Source: Bluesound Node 2i - Preamp/DAC: Benchmark DAC2 DX - Amp: Parasound Halo A21 - Speakers: MartinLogan Motion 60XTi - Shop Rig: Yamaha A-S501 Integrated - Shop Spkrs: Elac Debut 2.0 B5.2
-
I thought the same thing about the Dallas Cowboys, and we've all seen how that's turned out :sad:Not an Audiophile, just a dude who loves music, and decent gear to hear it with.
-
To get get back on the subject, if this guys done this before, more than once, he should already, be gone,Not an Audiophile, just a dude who loves music, and decent gear to hear it with.
-
I've had a few crossed words and unpleasant conversations with Ben, but didn't see this on the table from our interactions. Sorry to hear about the misfortune of a few of you folks, and I'd be more than happy to add my name to the list for repairing crossovers or building cables no charge for those who were burned.
-
To get get back on the subject, if this guys done this before, more than once, he should already, be gone,
It's not so much that he has done this before as it is that he has been teetering on mental, physical and financial breakdown and problems for years. Pretty much since he signed up here. It was a matter of time before one or more of these issues finally caused the collapse and complete failure to follow through. Plus, his marginal electronics work. It all started with his homebrew cables, which I think were decently made and went downhill from there.
The dude has had nothing but troubles in his life, some uncontrollable, but most self inflicted. This was bound to have happened eventually, but many didn't see the writing on the wall, hence the warnings from long time members, etc.
No one wins in this situation, no one.
H9"Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul!
This discussion has been closed.