Tweeter Mounting Brackets..

24

Comments

  • thsmith
    thsmith Posts: 6,082
    edited August 2010
    Put me down for 4 to do my 1Cs.
    Speakers: SDA-1C (most all the goodies)
    Preamp: Joule Electra LA-150 MKII SE
    Amp: Wright WPA 50-50 EAT KT88s
    Analog: Marantz TT-15S1 MBS Glider SL| Wright WPP100C Amperex BB 6er5 and 7316 & WPM-100 SUT
    Digital: Mac mini 2.3GHz dual-core i5 8g RAM 1.5 TB HDD Music Server Amarra (memory play) - USB - W4S DAC 2
    Cables: Mits S3 IC and Spk cables| PS Audio PCs
    · Share on FacebookShare on Twitter
  • muncybob
    muncybob Posts: 3,039
    edited August 2010
    I'll take 1 set....if you have not yet sent me the other rings for my 2B's that I just sent the $$ on, can you add these to them and let me know what I owe you including any additional shipping?
    Yep, my name really is Bob.
    Parasound HCA1500A(indoor sound) and HCA1000(outdoor sound), Dynaco PAS4, Denon DP1200 w/Shure V15 Type V and Jico SAS stylus, Marantz UD7007, Polk L600, Rythmik L12 sub.
    · Share on FacebookShare on Twitter
  • audiobilly
    audiobilly Posts: 351
    edited August 2010
    T-Nuts SUCK! All this work to make something nice and T-Nuts are OK with you. NOT!
    F1nut wrote: »
    Why would anyone need rings for the spikes? If your speakers didn't come with threaded inserts, simply buy 1/4-20 T-nuts and call it a day.
    · Share on FacebookShare on Twitter
  • audiobilly
    audiobilly Posts: 351
    edited August 2010
    4 maybe 8 sets Big Larry!
    · Share on FacebookShare on Twitter
  • vmaxer
    vmaxer Posts: 5,117
    edited August 2010
    I guess I am going to need enough to do my 1C's and 1.2TL's....
    Pio Elete Pro 520
    Panamax 5400-EX
    Sunfire TGP 5
    Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
    PS Audio GCPH phono pre
    Sunfire CG 200 X 5
    Sunfire CG Sig 405 X 5
    OPPO BDP-83 SE
    SDA SRS 1.2TL Sonicaps and Mills
    Ctr CS1000p
    Sur - FX1000 x 4
    SUB - SVS PB2-Plus

    Workkout room:
    Sony Bravia XBR- 32-Inch 1080p
    Onkyo TX-DS898
    GFA 555
    Yamaha DVD-S1800BL/SACD
    Ft - SDA 1C

    Not being used:
    RTi 38's -4
    RT55i's - 2
    RT25i's -2, using other 2 in shop
    LSI 15's
    CSi40
    PSW 404
    · Share on FacebookShare on Twitter
  • Disc Jockey
    Disc Jockey Posts: 1,013
    edited August 2010
    2 sets for my 2Bs please, thanks Larry!
    "The secret of happiness is freedom. The secret of freedom is courage." Thucydides
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,224
    edited August 2010
    deleted
    · Share on FacebookShare on Twitter
  • bikerboy
    bikerboy Posts: 1,211
    edited August 2010
    Hi Larry,
    I would like 3 pair for my sda 2.3. Thanks for the great job on the brackets, they make it easy to properly tighten the drivers into these 20+ year old speakers.
    Main system: Lyngdorf TDAI 2170 w/ Pioneer 42" plazma-> Polk LSiM 703 w/Tivo, Marantz tuner, BRPTT: Nothingham Spacedeck-> Pioneer PL L1000 linear arm-> Soundsmith DL 103R-> SUT->Bottlehead ErosDigital: I3 PC w/ Jriver playing flac -> Sonore Ultrarendu -> Twisted Pair Audio ESS 9028 w/ Mercury IVY Vinyl rips: ESI Juli@24/192-> i3 PC server
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,516
    edited August 2010
    audiobilly wrote: »
    T-Nuts SUCK! All this work to make something nice and T-Nuts are OK with you. NOT!

    Why don't you explain to us why the use of T-nuts for the spikes is not Ok with you. I'm dying to hear this.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,224
    edited August 2010
    F1nut wrote: »
    Why don't you explain to us why the use of T-nuts for the spikes is not Ok with you. I'm dying to hear this.


    Hummm me too, T nuts work just fine, they hold up my 185lb speaker..:eek:
    · Share on FacebookShare on Twitter
  • On3s&Z3r0s
    On3s&Z3r0s Posts: 1,013
    edited August 2010
    Before the run sells out, I'd like to get in line for 2 sets for a pair of 2B's. I assume the screw holes will line up with the 198 tweeters? (I'm gearing up to do the TL mod.)

    Also, Larry, I sent you a PM about a full set of rings for the 2B's as well if you still have 4 MW rings and 2 passives. This rocks! Thanks!!!
    · Share on FacebookShare on Twitter
  • audiobilly
    audiobilly Posts: 351
    edited August 2010
    I am dumbfounded that you regard my opinions so highly. Hold on brother.

    I do not like them. I do not like them Sam-I-Am. You have your opinions, and so do I.

    I do not like T-Nuts. Quick and easy, yes. Will they get the job done, yes. You can do better. You have with every other mod on your speakers,,, or have you? This is why Larry made the Rings, or at least one reason I would think.

    Wow, let down huh? Still got a pulse?
    F1nut wrote: »
    Why don't you explain to us why the use of T-nuts for the spikes is not Ok with you. I'm dying to hear this.
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,516
    edited August 2010
    audiobilly wrote: »
    I am dumbfounded that you regard my opinions so highly. Hold on brother.

    I do not like them. I do not like them Sam-I-Am. You have your opinions, and so do I.

    I do not like T-Nuts. Quick and easy, yes. Will they get the job done, yes. You can do better. You have with every other mod on your speakers,,, or have you? This is why Larry made the Rings, or at least one reason I would think.

    Wow, let down huh? Still got a pulse?

    It's obvious that you don't understand the purpose of the rings or the purpose of the spikes, so I'll explain it to you. The purpose of the rings is to couple the baskets to the cabinet. The purpose of the spikes is to decouple the cabinet from the floor. Additionally, the spikes do not go thru the cabinet wall, they are attached to the base board, which in turn is bolted thru the cabinet wall. Therefore, your opinion on the matter is without merit as is your attitude.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • Malbec
    Malbec Posts: 552
    edited August 2010
    Larry, PM me a cost for 12 sets, with shipping of course, when you arrive at an exact price for a set.

    Thanks,
    · Share on FacebookShare on Twitter
  • audiobilly
    audiobilly Posts: 351
    edited August 2010
    Oh boy ,,,, so much for "me" having a strong opinion on T-Nuts. It is obvious that I do not agree that T-Nuts are the best way. It is also obvious that you are very busy dying to be right.

    T-Nuts, I do not like them Sam-I-Am.

    Fin

    F1nut wrote: »
    It's obvious that you don't understand the purpose of the rings or the purpose of the spikes, so I'll explain it to you. The purpose of the rings is to couple the baskets to the cabinet. The purpose of the spikes is to decouple the cabinet from the floor. Additionally, the spikes do not go thru the cabinet wall, they are attached to the base board, which in turn is bolted thru the cabinet wall. Therefore, your opinion on the matter is without merit as is your attitude.

    This is Larrys' thread, and I apologize for this intrusion.
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,516
    edited August 2010
    audiobilly wrote: »
    Oh boy ,,,, so much for "me" having a strong opinion on T-Nuts. It is obvious that I do not agree that T-Nuts are the best way. It is also obvious that you are very busy dying to be right.

    For someone with such a strong opinion you don't seem to be able to relate how and why you formed that opinion. Nor have you been able to offer a better alternative.

    It's not a matter of me being right as I'm always open to learning new info concerning all things audio related. It is a matter of you not understanding the purpose of the rings or the spikes and the fact that you are evidently unable to express yourself without resorting to wise crack comments that have no bearing on the topic at hand.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • drselect
    drselect Posts: 664
    edited August 2010
    Please put me in for 2 sets for my CRS+
    · Share on FacebookShare on Twitter
  • hoosier21
    hoosier21 Posts: 4,411
    edited August 2010
    enought for 12 tweeters please
    Dodd - Battery Preamp
    Monarchy Audio SE100 Delux - mono power amps
    Sony DVP-NS999ES - SACD player
    ADS 1230 - Polk SDA 2B
    DIY Stereo Subwoofer towers w/(4) 12 drivers each
    Crown K1 - Subwoofer amp
    Outlaw ICBM - crossover
    Beringher BFD - sub eq

    Where is the remote? Where is the $%#$% remote!

    "I've always been mad, I know I've been mad, like the most of us have...very hard to explain why you're mad, even if you're not mad..."
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,224
    edited August 2010
    I will have these up by the end of the week.. Just tring to close out some loose ends before I let loose..
    · Share on FacebookShare on Twitter
  • headrott
    headrott Posts: 5,496
    edited August 2010
    Looks good Larry. They should work well. I will defiantely be in for 2 sets when you are ready to sell.

    Greg
    Relayer-Big-O-Poster.jpg
    Taken from a recent Audioholics reply regarding "Club Polk" and Polk speakers:
    "I'm yet to hear a Polk speaker that merits more than a sentence and 60 seconds discussion." :\
    My response is: If you need 60 seconds to respond in one sentence, you probably should't be evaluating Polk speakers.....

    "Green leaves reveal the heart spoken Khatru"- Jon Anderson

    "Have A Little Faith! And Everything You'll Face, Will Jump From Out Right On Into Place! Yeah! Take A Little Time! And Everything You'll Find, Will Move From Gloom Right On Into Shine!"- Arthur Lee
    · Share on FacebookShare on Twitter
  • DarqueKnight
    DarqueKnight Posts: 6,765
    edited August 2010
    I want 22 sets for my:

    1.2TL's (8 sets)
    SRS's (8 sets)
    3 pairs of CRS+'s (6 sets)
    Proud and loyal citizen of the Digital Domain and Solid State Country!
    · Share on FacebookShare on Twitter
  • agfrost
    agfrost Posts: 2,428
    edited August 2010
    2 sets for me, please!

    Jay
    Jay
    SDA 2BTL * Musical Fidelity A5cr amp * Oppo BDP-93 * Modded Adcom GDA-600 DAC * Rythmik F8 (x2)
    Micro Seiki DQ-50 * Hagerman Cornet 2 Phono * A hodgepodge of cabling * Belkin PF60
    Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
    · Share on FacebookShare on Twitter
  • JayCee
    JayCee Posts: 1,500
    edited August 2010
    I'd like 12 for 1.2tl's and 1C's.

    Thanks,

    John
    ➀Speakers: Polk1.2tl's (Uber Mods) ➁Pre/Amp/DAC: PS Audio BHK Signature & 250, DirectStream ➂Cables/IC's: MIT S1Bi-Wire/S1 Balanced +Avel Lindberg 1000VA "Dreadnought" ➃Power Conditioner: PS Audio P15 Power Plant ➄Power Cords: Core Power Technologies Gold, DH Labs Power Plus DIY w/Neotech NC-P301 & P311ends ➅Streaming: Roon ROCK on wifi'd NUC, TP-Link WAP, & Uptone EtherREGEN, AfterDark, Emperor Double Crown Clock, Black Modernize LPS, PS Audio AirLens⟿Ω☯☥☮⟿🔊♩♪♫♬♩♪♫♬♩♪♫♬
    · Share on FacebookShare on Twitter
  • MillerLiteScott
    MillerLiteScott Posts: 2,561
    edited August 2010
    Larry 1 set please for my 2B's

    Thanks,

    Scott
    I like speakers that are bigger than a small refrigerator but smaller than a big refrigerator:D
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,224
    edited August 2010
    I will PM everyone on this list as soon as I have them going. I should be cutting them tomorrow morning..

    They will be $6 a set plus shipping... (a set is one tweeter)

    I tried to get them lower but I can't. I don't have enough drop 16ga material to cut them so I have to dig into a new sheet, Sorry fellas but I went through all are scrap material,it just is'nt there..

    Thanks,

    Larry.
    · Share on FacebookShare on Twitter
  • BIZILL
    BIZILL Posts: 5,432
    edited August 2010
    does your laser microtab to keep parts from tipping up and killing the head? when we got our bystronic with microtabbing, it was a godsend over our cincinnati that did not. then you can really cut thin parts close together. another thing, dunno if ya'll have liquid nitrogen available as assist gas. we switched over to that over oxygen and it leaves no scale. the cut is clean as though it was polished. we had to because our powdercoat would sometimes flake off when the lasered edges would de-scale. it also keeps the part cool so you can pack 'em tight like sardines, that is, if you're not already common-cutting.

    POLK SDA-SRS 1.2TL -- ADCOM GFA-5802
    PANASONIC PT-AE4000U -- DIY WILSONART DW 135" 2.35:1 SCREEN
     ONKYO TX-SR805
    CENTER: CSI5
    MAINS: RTI8'S
    SURROUNDS: RTI8'S
    7.1 SURROUNDS: RTI6'S
    SUB: SVS PB12-PLUS/2 (12.3 series)
    XBOX 360    WiiPS3/blu-rayTOSHIBA HD-A35 hd dvd

    http://polkarmy.com/forums/index.php
    bobman1235 wrote:
    I have no facts to back that up, but I never let facts get in the way of my arguments.
    · Share on FacebookShare on Twitter
  • Big Dawg
    Big Dawg Posts: 2,005
    edited August 2010
    4 sets for my SRS2's please!
    · Share on FacebookShare on Twitter
  • geoff727
    geoff727 Posts: 546
    edited August 2010
    Larry, sign me up for 3 sets please.
    Polk SDA SRS 2
    Polk RTA 15tl
    Polk Monitor 7C
    Polk Lsi9
    Infinity RS-II (modded)
    Infinity RS-IIIa (modded)
    Infinity RS 2.5 x 2
    Magnepan 1.6QR (modded)

    System: http://forum.audiogon.com/cgi-bin/fr.pl?vevol&1290711373
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,224
    edited August 2010
    Emails being sent a little at a time. Tweeter brackets are ready.

    I only cut 300 sets..
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,224
    edited August 2010
    If I missed PMing anybody please contact me. I'm on my Iphone doing this so I'm sure you understand..

    Thanks!!

    Larry.
    · Share on FacebookShare on Twitter