Post a picture.....any picture...part deux...

Options
1…146147149151152…251

Comments

  • SCompRacer
    SCompRacer Posts: 9,396
    Options
    hub10civ7j74.jpg
    bnygrl00fc7o.jpg
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on Facebook
  • daddyjt
    daddyjt Posts: 3,263
    Options
    SCompRacer wrote: »
    jdpdfsk9wbu2.jpg

    “There can be only one…!”
    “Human beings are born with different capacities. If they are free, they are not equal. And if they are equal, they are not free.”
    ― Aleksandr Solzhenitsyn
    · Share on Facebook
  • SCompRacer
    SCompRacer Posts: 9,396
    Options
    "Der Self-Satisfiedkrauttenwagen winner at the 2025 California Concours d'Lemons was Andrew Hancock from Fremont, CA with his 1971 VW ThinBug. The car was modified by taking a slice out of the middle of the car lengthwise, turning it into a single wide, tandom seat configuration. The work was exceptionally well done, which just goes to show that Andrew was so preoccupied with whether or not he could, he didn't stop to think if he should. But we are glad he did. A well deserved award."

    gr35ce8g4796.jpg
    ofvadz065yhc.jpg





    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on Facebook
  • ken brydson
    ken brydson Posts: 9,103
    Options
    SCompRacer wrote: »
    jdpdfsk9wbu2.jpg

    Just a flesh wound...
    · Share on Facebook
  • jdjohn
    jdjohn Posts: 3,443
    Options
    9t0tifdtspho.jpg
    "This may not matter to you, but it does to me for various reasons, many of them illogical or irrational, but the vinyl hobby is not really logical or rational..." - member on Vinyl Engine
    "Sometimes I do what I want to do. The rest of the time, I do what I have to." - Cicero, in Gladiator
    Regarding collectibles: "It's not who gets it. It's who gets stuck with it." - Jimmy Fallon
    · Share on Facebook
  • bcwsrt
    bcwsrt Posts: 2,691
    Options
    fzt9wyjwvadw.jpeg
    Brian

    · Share on Facebook
  • BlueBirdMusic
    BlueBirdMusic Posts: 3,132
    Options
    680qmkyz4g33.png
    Photo from Venice, LA. Where the Mississippi River meets the Gulf of America
    September 1, 2025
    "Sometimes you have to look to the past to understand where you are going in the future"
    Harry / Marietta GA
    m9iutt1ly1yd.png
    · Share on Facebook
  • BlueBirdMusic
    BlueBirdMusic Posts: 3,132
    Options
    wcdepwarrxps.png
    "Sometimes you have to look to the past to understand where you are going in the future"
    Harry / Marietta GA
    m9iutt1ly1yd.png
    · Share on Facebook
  • BlueBirdMusic
    BlueBirdMusic Posts: 3,132
    Options
    7sn4ng469omw.png
    "Sometimes you have to look to the past to understand where you are going in the future"
    Harry / Marietta GA
    m9iutt1ly1yd.png
    · Share on Facebook
  • SeleniumFalcon
    SeleniumFalcon Posts: 4,384
    Options
    Frank listening to Altec Lansing speakers:

    dv1tkx7dxupq.png


    · Share on Facebook
  • SCompRacer
    SCompRacer Posts: 9,396
    edited September 2025
    Options
    "Walkaround photo album of my (Oleg Sapunkov) full size 3D printed replica 11 inch Model 1861 Dahlgren Gun.

    The complete replica is 4.0 meters (13.1 feet) long, 800 mm (31.5 in) in maximum diameter, 1.0 meters (3.3 feet) at maximum width (with the trunnions). It took 96 kilograms (211 pounds) of PLA to 3D print, with 98 spool changes, each of which was accompanied by a nozzle cleaning procedure using nozzle needles and a cold pull, which took around 20 minutes each time. The replica took a total of 1644 hours to 3D print, or 68.5 days of continuous printer time - not counting the nozzle cleanings, or the electronics enclosure fan cleanings I did for the printer between the completion of each major part."


    Must be a large 3D printer.
    https://www.facebook.com/search/top?q=oleg sapunkov&__stsd__=eyJwcmltYXJ5Ijp7InR5cGUiOiJUWVBFQUhFQURfUEVPUExFX0VOVElUSUVTIn19

    0rbedsp3g2fm.jpg
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on Facebook
  • F1nut
    F1nut Posts: 52,406
    Options
    The question...will it fire?
    · Share on Facebook
  • bcwsrt
    bcwsrt Posts: 2,691
    Options
    Yes, just once!

    Brian

    · Share on Facebook
  • SCompRacer
    SCompRacer Posts: 9,396
    edited September 2025
    Options
    To fire it, you have to use 3D printed balls and ammo, and have what you are printing to do it. :D
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on Facebook
  • SCompRacer
    SCompRacer Posts: 9,396
    Options
    oss3slaea7oi.jpg
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • daddyjt
    daddyjt Posts: 3,263
    Options
    2oow5i4vd9iy.jpeg
    “Human beings are born with different capacities. If they are free, they are not equal. And if they are equal, they are not free.”
    ― Aleksandr Solzhenitsyn
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • mhardy6647
    mhardy6647 Posts: 35,562
    edited September 2025
    Options
    SeleniumFalcon wrote: »
    Frank listening to Altec Lansing speakers:

    dv1tkx7dxupq.png

    Most of that generation heard themselves in or near the studio/control room that way.
    I will say that the recordings monitored, mixed, or mastered on Altecs do sound very good indeed when played back on Altecs. B)
    EDIT: And a little beyond that generation, too
    15406378686_aa511a7d39_w.jpg
    · Share on Facebook
  • mhardy6647
    mhardy6647 Posts: 35,562
    Options
    Oh -- of course -- unless they were RCA artists and/or recording in RCA studios.
    Then they heard themselves on RCA LC-1A coaxes -- which are also quite sublime. Many would say even better than Altec Duplexes. Duplexes are easier to find and less expensive today -- but the RCAs are very, very special. :p
    jgvfkhiho95u.jpg
    · Share on Facebook
  • SCompRacer
    SCompRacer Posts: 9,396
    Options
    k76axm2nby3l.jpg
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on Facebook
  • daddyjt
    daddyjt Posts: 3,263
    Options
    daddyjt wrote: »
    2oow5i4vd9iy.jpeg

    I do find it amusing how Rob Reiner became the real-life adult version of his character on All In the Family…
    “Human beings are born with different capacities. If they are free, they are not equal. And if they are equal, they are not free.”
    ― Aleksandr Solzhenitsyn
    · Share on Facebook
  • motorstereo
    motorstereo Posts: 2,427
    Options
    mhardy6647 wrote: »
    SeleniumFalcon wrote: »
    Frank listening to Altec Lansing speakers:

    dv1tkx7dxupq.png

    Most of that generation heard themselves in or near the studio/control room that way.
    I will say that the recordings monitored, mixed, or mastered on Altecs do sound very good indeed when played back on Altecs. B)
    EDIT: And a little beyond that generation, too
    15406378686_aa511a7d39_w.jpg

    Ohh how I envy him being able to sit and listen like that. All but impossible for me as far back as I can remember.
    · Share on Facebook
  • SCompRacer
    SCompRacer Posts: 9,396
    Options
    cmc44pdllsy6.jpg
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on Facebook
  • SCompRacer
    SCompRacer Posts: 9,396
    Options
    smydxsjnrio6.jpg
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on Facebook
  • mhardy6647
    mhardy6647 Posts: 35,562
    Options
    mj8xb64em06t.jpg
    xqlyp7hkd5jb.jpg
    y03fd49trqpj.jpeg
    (three from the verdant memefields at ASR)
    · Share on Facebook
  • mhardy6647
    mhardy6647 Posts: 35,562
    Options
    oh, and I forgot this one! :blush:
    achq7sj0sfox.jpeg
    · Share on Facebook
  • SCompRacer
    SCompRacer Posts: 9,396
    Options
    Cue Lynyrd Skynyrd.....Ooh, that smell...

    LG dishwasher.

    7bafuqzfdhp0.jpg
    lar3tpzg2vmv.jpg
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on Facebook