PSW505 Amp failed - Polk says part on back orderggested aftermarket???

Any idea for after market source for amp board? They said the part number is RF5050-4.
Thanks
Joe

Comments

  • lopezjl
    lopezjl Posts: 1
    Just called still on back order.
  • treitz3
    treitz3 Posts: 19,003
    If you remove the plate amp and send it in to a reputable repair shop, they should be able to diagnose and repair it. FWIW

    Tom
    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
  • Ruiner13
    Ruiner13 Posts: 16
    I have two dead PSW505's, I guess I'll be taking them someplace.... now to start that search.
  • rooftop59
    rooftop59 Posts: 8,121
    Ruiner13 wrote: »
    I have two dead PSW505's, I guess I'll be taking them someplace.... now to start that search.

    The bench fee will be more than it's worth to repair them unfortunately...
    Living Room 2.2: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Arcam SA30; Musical Fidelity A308; Sony UBP-x1000es
    Game Room 5.1.4:
    Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 900 mains, CLR-3000 center, StudioMonitor 350 surrounds, ProMonitor 800 atmos x4; Sub - Monoprice Monolith 15in THX Ultra

    Bedroom 2.1
    Harmon Kardon HK3490; Bluesounds Node N130; Polk RT25i; ACI Titan Subwoofer
  • Ruiner13
    Ruiner13 Posts: 16
    rooftop59 wrote: »
    Ruiner13 wrote: »
    I have two dead PSW505's, I guess I'll be taking them someplace.... now to start that search.

    The bench fee will be more than it's worth to repair them unfortunately...

    What would you suspect it would cost in your experiences Roof?
  • rooftop59
    rooftop59 Posts: 8,121
    Ruiner13 wrote: »
    rooftop59 wrote: »
    Ruiner13 wrote: »
    I have two dead PSW505's, I guess I'll be taking them someplace.... now to start that search.

    The bench fee will be more than it's worth to repair them unfortunately...

    What would you suspect it would cost in your experiences Roof?

    Bench fees alone are usually $125-150. You might save a little with two. Depending on where you are, you can find an SVS PB 1000 for 350-400, and that will trounce both of your current subs put together. I would go in that direction.
    Living Room 2.2: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Arcam SA30; Musical Fidelity A308; Sony UBP-x1000es
    Game Room 5.1.4:
    Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 900 mains, CLR-3000 center, StudioMonitor 350 surrounds, ProMonitor 800 atmos x4; Sub - Monoprice Monolith 15in THX Ultra

    Bedroom 2.1
    Harmon Kardon HK3490; Bluesounds Node N130; Polk RT25i; ACI Titan Subwoofer
  • mantis
    mantis Posts: 17,189
    It sucks we live in a throw away world.
    Dan
    My personal quest is to save to world of bad audio, one thread at a time.
  • Ruiner13
    Ruiner13 Posts: 16
    rooftop59 wrote: »
    Ruiner13 wrote: »
    rooftop59 wrote: »
    Ruiner13 wrote: »
    I have two dead PSW505's, I guess I'll be taking them someplace.... now to start that search.

    The bench fee will be more than it's worth to repair them unfortunately...

    What would you suspect it would cost in your experiences Roof?

    Bench fees alone are usually $125-150. You might save a little with two. Depending on where you are, you can find an SVS PB 1000 for 350-400, and that will trounce both of your current subs put together. I would go in that direction.


    Do tell brother, where are you finding that sub so cheap? I see them for 800 on amazon.
  • VR3
    VR3 Posts: 28,606
    mantis wrote: »
    It sucks we live in a throw away world.

    This is the irony to the environmental movements.
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.