Vintage Monitor and SDA Speaker Deals
Options
Comments
-
Oh, you were talking about the SDA SRS 2's. They show up in Midlothian VA.
-
You can't post your own ad here without following the rules. Nice try.Gustard X26 Pro DAC
Belles 21A Pre Upgraded with Mundorf Supremes
B&K M200 Sonata monoblocks refreshed and upgraded
Polk SDA 1C's modded / 1000Va Dreadnaught
Wireworld Silver Eclipse IC's and speaker cables
Harman Kardon T65C w/Grado Gold. (Don't laugh. It sounds great!)
There is about a 5% genetic difference between apes and men …but that difference is the difference between throwing your own poo when you are annoyed …and Einstein, Shakespeare and Miss January. by Dr. Sardonicus -
-
Never heard of a SRS 2TL...SDA SRS 2.3TL's
Silk Audio MS-90-BT integrated tube amp
Yaqin MS-20L integrated tube amp
SDA 2B TL's -
michaeljhsda2 wrote: »Never heard of a SRS 2TL...
They never produced one, but at some point on this forum appeared an instruction for x’overs upgrade. I like the result very much.
Here is my thread https://forum.polkaudio.com/discussion/198344/sda-srs2-86-blade-blade-budget-upgrade-looking-for-an-advice
-
Did you mean 1.2TL?SDA SRS 2.3TL's
Silk Audio MS-90-BT integrated tube amp
Yaqin MS-20L integrated tube amp
SDA 2B TL's -
michaeljhsda2 wrote: »Did you mean 1.2TL?
‘86 SRS 2 blade-blade converted to SRS 2TL. These have never been produced by Polk Audio, but with the help of Matthew Polk some guys came up with proper changes for x’overs. -
Don't take experimental gene therapies from known eugenicists.
-
Speaking of TL those are TL's. Always liked that little blade above the tweeters. Reminds me of back in the day we used to put louvers on everything. Including the back window of your Trans Am.
-
Good price for them. I'd love a second set but too far.
-
I'd like a set of the RTA's some day. I think They had a 15?HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
I'd snag them if they were closer. Fully modded, the vintage MTM's are keepers.Don't take experimental gene therapies from known eugenicists.
-
Speaking of TL those are TL's. Always liked that little blade above the tweeters. Reminds me of back in the day we used to put louvers on everything. Including the back window of your Trans Am.
That'd be a tidbit of info to hear from the original engineer, why they only added the reflector to the top mid/tweet.Don't take experimental gene therapies from known eugenicists. -
Seems like my RTA12's or some other Polk speaker has that flap thing.HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
That'd be a tidbit of info to hear from the original engineer, why they only added the reflector to the top mid/tweet.
Best I can do it the marketing spin from back in the day.
-
Looking at the side-by-side pic of the 8TL vs 11TL, the tweeter is @ 6" higher. I'll come across a set locally...eventually.
And undoubtedly, the 11's cabinet would get better bracing to boot.Don't take experimental gene therapies from known eugenicists. -
Even higher on the 15's.
-
Even higher on the 15's.
Judging by PR dimensions, I'd wager the 11's tweeter to be placed higher.....
Edit. Steve P gets the prize...
Don't take experimental gene therapies from known eugenicists. -
Looking at pictures might not be very accurate. In this one the 15's tweeter might be slightly below the 11TL position.
-
I'd like a set of the RTA's some day.
Interestingly by the way, RTA 12s have two blades: one below the tweeter on the main bracket and the second in the hat. -
Looking at pictures might not be very accurate. In this one the 15's tweeter might be slightly below the 11TL position.
That's what I deducted. If you transpose the 11TL Image over the 15TL, the 11's tweeter is above the 15's...???Don't take experimental gene therapies from known eugenicists. -
@xschop is going to make me some for an SDA tweet mod.
-
These guys have been trying to sell these RTA 8T for $260 for over a year and logically, they increased to price to $350 since nobody has bought it. This is how you fish for an idiot by the book.
https://sfbay.craigslist.org/eby/ele/d/vintage-polk-rta-8t-speakers/7719091491.html -
This content has been removed.
-
-
WOW!!!! Better Run!!!
$700
Better run away I guess
tweeters look SL2000 with a turtle neck made of something.
For pristine conviction SRS 2 fair market price is $500 max. I bought mine for $375 a year ago. So the bundle with a receiver, “mixer” and sub looks more like a garage clean out.
-
Seldom seen in the wild...
LF14 for $75 in FT Collins, CO.
https://www.facebook.com/marketplace/item/1051203145968945?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:538868c9-1ea4-4c65-a5b0-90c280af7ea3
KEF Xq5s / Velodyne DD12 / Apollon Purifi 1ET6525SA / SST Thoebe II / Bluesound Node 130 / Oppo BDP-105D / Technics SP-15 w/SAEC WE-308SX & Ortofon AS-309 arms / Audio-Technica ART-1 & Dynavector XX2 Mk II carts -
More cheapo Polk goodies in Canon City, CO....$150./ They'll need a little love.
https://www.facebook.com/marketplace/item/907246690808202?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:538868c9-1ea4-4c65-a5b0-90c280af7ea3
KEF Xq5s / Velodyne DD12 / Apollon Purifi 1ET6525SA / SST Thoebe II / Bluesound Node 130 / Oppo BDP-105D / Technics SP-15 w/SAEC WE-308SX & Ortofon AS-309 arms / Audio-Technica ART-1 & Dynavector XX2 Mk II carts -
Seldom seen in the wild...
LF14 for $75 in FT Collins, CO.
https://www.facebook.com/marketplace/item/1051203145968945?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:538868c9-1ea4-4c65-a5b0-90c280af7ea3
Question. I can't remember what speakers these went with. Monitor 10's ?Randy-Maine
2ch-RTA15tl crossover upgrade
by David WMG
Yamaha cr1000 cr2040
HT-Yamaha Parasound Acurus
MIT BJC Cs1000p Polk Rotation -
This content has been removed.
